VOLANTEXRC BF-109 4-CH Ready to Fly (RTF) for Beginners with Xpilot Stabilization System
VOLANTEXRC BF-109 4-CH Ready to Fly (RTF) for Beginners with Xpilot Stabilization System See it in action on YouTube: https://www.youtube.com/watch?v=CMGNRTuFDf0&ab_channel=EXHOBBYLTD The BF-109 Micro warbird is a classic WWII semi-scale park flyer with the stability needed for beginners to learn how to fly and the necessary power to provide a fun flying experience for RC enthusiasts. This model is manufactured from durable EPP foam and a detachable prop system adds to the durability by nearly eliminating broken props and bent motor shafts. Like most Volantex RC airplanes, this one includes the Xpilot Stabilization System which allows the performance envelope of the airplane to expand with your flying skills and makes flying this airplane a more enjoyable experience. In Full or Partial Assist Mode with Xpilot, if you ever lose control, simply release the control sticks and the airplane will quickly return to level flight. Even when in Expert Mode, if you get into trouble, all you need to do is move the Xpilot switch to Full or Partial Assist for the system to take over and you're back in level, stable flight. Another option included with this airplane is the removable snap-in-place landing gear that can be used for take-offs from smooth surfaces. When hand-launching is a better option, using Xpilot Assist makes it easy whether the gear is installed, or not. For added fun when flying with the Xpilot system, you can use the Stunt button on the transmitter to automatically enable the airpalne to complete either a loop or roll that will make you look like an ace pilot. Features:
Specifications:
FREE SHIPPING LOWER 48 USA ONLY. Contact us at [email protected] for international shipping. |
1/10 Moxoo XP 2WD Off Road Truck Brushless RTR
1/10 Moxoo XP 2WD Off Road Truck Brushless RTR |
COR00257
$249.99
Bob Smith Industries 302 Extra Fine Extender Tips for CA Glue Bottles (6 Pack)
Bob Smith Industries 302 Extra Fine Extender Tips for CA Glue Bottles (6 Pack) UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.
Works Best On:
Avaliable in 1 oz Size.
|
BSI-302
$2.99
High Quality Wood Props for Electric Aircraft
DW-EP-Prop
$12.99