Bargain Bin

New special offers are available!
more offers

Bargain Bin

Get great deals on these great items! Every item found here is in working order but may have minor cosmetic defects or no packaging. Please read each items description to learn more.

Products

30cc V3 Extra Replacement Gear Cuffs

30cc V3 Extra Replacement Gear Cuffs

30cc V3 Extra Replacement Gear Cuffs. These gear cuffs fit over the landing gear and rest against the fuse. Gear cuffs are a great way to add an a scale aesthetic to your plane while adding to the aerodynamic properties of the airframe.

Sold in pairs.

BB-Cuffs-30

$14.00

60mm machine bolt

60mm machine bolt

60 mm machine bolt. (threaded section = 22mm)
Diameter= 4.8mm

BB-60-bolt

$1.00

6mm Blind Nuts

6mm Blind Nuts

Blind Nuts with 6mm threads. Great for many applications!
Includes instructions for installation.

BB-20cc-BN

$1.00

Battery for the X9 Quad Copter

Battery for the X9 Quad Copter

Untitled Document

Overview

Battery for the X9 Quad Copter . If you need a replacement battery or some extra to enjoy extended flight times- you have come to to right place.

 

Specs

  • 150mah
  • 3.7v

CS023723-Battery

$5.00

$3.00

Lemon RX DSMX Compatible PPM 8-Channel Receiver w/Satellite with Failsafe

Lemon RX DSMX Compatible PPM 8-Channel Receiver w/Satellite with Failsafe

Untitled Document Description:

Lemon Rx DSMX Compatible PPM 8-Channel Receiver + Lemon DSMX Compatible Satellite with Failsafe

 

Type: DSMX Compatible PPM 8-Channel Receiver
Number of Channel: 8 (PPM signal)
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 35(W) x 7(H)  mm
Weight: 2.8 gram without satellite
Voltage Range: 3.45 - 7.2V

 

Highlight - FailSafe option via press of a button to guranteed the highest level of safety even in the event of RF signal loss - 3 microprocessors based system to ensure the highest performance available - Designed especially for Copter high current drain application.

Understanding the receiver

   

 

Setup Instruction

Note: It is highly recommend user to enable FailSafe. Some copters' controller does not have fail-safe system implemented. At the case where the quad copter has flown very far away from the transmitter (eg. 2 km away from transmitter for Aerial photography application), RF signal may have faded due to far distance. FailSafe allows the receiver to output default signal when signal is lost to keep the quad copter flying until signal is recovered again.

Binding Setup
  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.
Setting Failsafe 
  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

Pulse Sequence

The PPM pulse sequence is in the following order:

  1. Throttle
  2. Aileron
  3. Elevator
  4. Rudder
  5. Gear
  6. Aux1
  7. Aux2
  8. Aux3

LM-0007

$29.90

Misc. Set of Hex screws

Misc. Set of Hex screws

Set of misc. 9mm hex screws (4 screws)
2.6mm diameter

BB-misc-hex

$1.00

RC Flite Light Wiring Kit for KNIGHT Lighting System

RC Flite Light Wiring Kit for KNIGHT Lighting System

Untitled Document

Wing Wiring Kit for Duke System


Description:

The Additional Wiring Kit for the Knight system will allow the user to install lights on a second airframe and transfer the lights from one plane to another. It includes genuine WS Deans wing plugs, wiring, and brass 4-40 inserts. 

 

Wires (not including connectors) are 39 1/4"


RCFS-Wirekit-K

$24.00

$18.00

X9 Quad Copter Replacement Props

X9 Quad Copter Replacement Props

Untitled Document

X9 Quad Copter Replacement Props

Looking for some extra props for your Aircraft X9 Quad Copter? We have you covered. These props are really durable and will have your X9 up and flying like brand new!

Available in sets of four. (Two Black and Two White)

 

 

CS023723 - Prop

$4.00

$2.00

Bag of Misc. Machine Screws

Bag of Misc. Machine Screws

Bag of 15 screws. Major diameter= 2.7mm, length= 6mm

BB-Misc-Screw

$0.50

Cabel line Crimping Tubes

Cabel line Crimping Tubes

Cable line Crimping Tubes
Tubes Sold Individual. Please select quantity.

BB-Crimp-Tube

$0.75

HD Bundle #1

HD Bundle #1

Untitled Document

In this bundle: 2 HD D18, 3 HD DSP33 (Almost $56 in savings!) + FREE T-shirt

Please read info about each servo below.

HD D18:

Similar to the Storm series of our Power HD servos - the high voltage D-series are a coreless servo with the same hardened aluminum case and splash water protection.

These HD D18 servos are capable of 7.4 volts in 10 seconds and are made with the finest titatanium and aluminum gears. The long lasting coreless motor guarantees quality performance for a lifetime at lower temperatures.

Durable!

Dynamic!

InDestructible!

Distinguished!

Dirt Cheap!

Dapper! - The "D" in our Power HD D18 high voltage servos stands for all of these things and MORE!

 

Specs:

  • Torque:
    • 201.3 oz/in at 6V ( 14.5 kg/cm)
    • 249.9 oz/in at 7.4V (18.0 kg/cm)

  • Speed:
    • .12 sec at 6V
    • .10 sec at 7.4V

  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.6 oz (75g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)

  • Operating Temp - -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • CORELESS Motor
  • Double Ball Bearings
  • Titanium and Aluminum gears
  • Water resistant O-Rings


HD DSP33:

The Power HD DSP33 micro servo is extremely fast and has digital control electronics for increased performance. This is by far the lightest servo at RedwingRC- the DSP33 weighs only 2.9g!!! This servo features a light, 3"-long cable terminated by a special 1.5mm-pitch ZH-style JST connector intended for very small RC receivers. Servo horns and associated hardware are included.

**Note: This servo’s connector will not work directly with standard 0.1" servo receptacles. Also, this type of connector has ground as the middle pin, which differs from standard servo cables. The signal pin is the gray wire.**

The servo’s gears are plastic for reduced weight. It is important to note as with some hobby servos, stalling or back-driving this servo can strip its gears.



Specifications:

  • Torque:
    • 4.2 oz/in at 4.8V (0.3 kg/cm)
    • 4.9 oz/in at 6V (0.35kg/cm)

  • Speed:
    • .09 sec at 4.8V
    • .07sec at 6V

  • Voltage: 4.8v - 6v
  • Weight: .10oz (2.9g)
  • Size: 1.06 x .33 x 1.06 in (27 x 8.5 x 27mm)

  • Digital
  • Dimension: 27 x 8.5 x 27mm
  • Lead Length: 80mm
  • Storage Temperature: -20℃~60℃
  • Operating Temperature: -10℃~50℃
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes
  • BB-HD-BNDL-9

    $107.00

    Hi-Tec Servo Bundle #3

    Hi-Tec Servo Bundle #3

    Untitled Document

    In this bundle: 1 MAXIMA 9, 5 HiTEC 65HB (ALMOST $150 IN SAVINGS) + FREE T-shirt

    Please read info about each servo below.


    Maxima 9 - 9-Channel Micro Receiver

    The Maxima 9 is a 9-channel, high response, low latency micro receiver. Designed to work with all Hitec Generation 2 Adaptive Frequency Hopping Spread Spectrum Technology radios and the digital servo line.

    The Maxima 9 is full range capability combined with a lightning fast 7ms refresh frame rate and secure hold and fail-safe function make it the perfect micro receivers for both intermediate and advanced pilots who require bullet-proof performance. The Maxima 9 has a dual diversity standard antenna (non-BODA). Pair this with Hitec’s Aurora 9X, Flash 8 and/or Flash 7 radio systems for the ultimate in radio control technology.

    Key Features

    • Full-Range Operation
    • Dual Standard Antennas (Non-Boda)
    • Hold and Fail-Safe Function
    • Compatible with Aurora 9X and Digital Servos Only
    • Wide Operating Voltage: 3.7~9.0 volts
    • Dimensions: 1.46 x 0.96 x 0.57 in
    • Weight: 0.29 oz



    Hi-Tec 65 HB+

    The HS-65 HB+ is a great choice because it is one of Hi-Tec's strongest micro servo and it has a very long life due to the durable Karbonite gears. The HS-65 HB+ can provide over 30 oz/in of power at 6 volts. Created for higher performance micro helicopters, electric park flyers, & 1/18 scale cars. This servo features a top ball-bearing for long life and positive centering.

    Arms included: Single arm, Double arm, Quad arm

    Features

    • High Efficiency Neodymium Magnet Motor
    • Ball Bearings
    • Karbonite Gears

     

    Specifications

    • Torque:
      • 24.99 oz/in at 4.8V (1.8 kg/cm)
      • 30.55 oz/in at 6V (2.2 kg/cm)

    • Speed:
      • .14 sec at 4.8V
      • .11 sec at 6V

    • Voltage:
    • Weight: 0.39 oz (11.2 g)
    • Size: 23.6 x 11.6 x 24 mm (0.92 x 0.42 x 0.94 in)

    • Motor Type: Neodymium Magnet
    • Bearing Type: Yes

    BB-HS-BNDL-6

    $120.00