Batteries and Chargers

Batteries and Chargers


Products

LiFe Batteries 2S

LiFe Batteries 2S

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:
  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 1450mah - 2.8oz,
    • 2100mah - 4oz,
    • 3100mah Life - 5.5oz
  • Size:
    • 1450mah- 15mm x 34mm x 87mm,
    • 2100mah- 12mm x 50mm x 106mm,
    • 3000mah- 130mm x 45mm x 15m
  • Voltage: 6.6Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 2 cells (2s)
  • 14gauge Wire
  • Connectors: Two Options!
    • T Connector (T connector that fit a standard Dean)
    • XT-60 Connector. Choose Below
  • Also a balancing lead


Be sure to select the XT connector if purchasing for use with our Power Box PRO's.

  • 1450mah - $15.99
  • 2100mah - $25.99
  • 3000mah - $39.99

LXT-2S-2100

$25.99

LiFe Batteries 3S

LiFe Batteries 3S

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:
  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 3S 2100mah - 6.2oz
    • 3S 3100mah Life - 9oz
  • Size:
    • 3S 2100mah- 95mm x 29mm x 30mm
    • 3S 3000mah- 130mm x 42mm x 20mm
  • Voltage:
    • 3S 2100- 9.9 Volts
    • 3S 3000- 9.9 Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 14gauge Wire
  • Connectors: XT-60 Connector
  • Balancing lead


These batteries have the XT-60 connector.

  • 3S 2100mah - $33.99
  • 3S 3000mah - $49.99
  • LXT-3S-3000

    $49.99

    LiFe Batteries 4S

    LiFe Batteries 4S

    Description:
    Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

    1) LiFe Batteries are lightweight - as light as Lipos
    2) LiFes are safer than Lipos (do not combust easily like lipos)
    3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
    4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
    5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

    The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

    The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

    We recommend the following:
    On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
    Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
    (1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

    50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
    (1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



    WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


    Specifications:
    • Type: LiFe Battery (same technology as A123)
    • Weight:
      • 4S 2100 mah 8oz
      • 4S 3000 mah 11.6oz
    • Size:
      • 4S 2100- 95mm x 29mm x 40mm
      • 4S 3000- 130mm x 43mm x 28mm
    • Voltage:
      • 4S 2100- 13.2 Volts
      • 4S 3000- 13.2 Volts
    • Discharge rate:
      • 20c maximum continuous
      • 40c maximum burst
    • 14gauge Wire
    • Connectors: XT-60 Connector
    • Balancing lead


    These batteries have the XT-60 connector.

  • 4S 2100mah - $42.99
  • 4S 3000mah - $56.99


  • LXT-4S-2100

    $42.99

    Redwing Lipo Batteries

    Redwing Lipo Batteries

    Description:

    Redwing 2S 2200 mah Lipo Batteries.

    These batteries are lightweight with a high density of energy and low internal resistance. Lipo batteries have a long life and will provide the power you need when you need it.

    These batteries have the XT60 connector, JR connector, and Balance plug



    Specifications:

    • Type: Lipo Battery
    • Weight:
      • 2200mah - 5.2 oz.
    • Size:
      • 2200mah- 10.5cm x 3.5cm x 1.5cm
    • Voltage: 7.4Volts
    • 2 cells (2s)
    • Connectors: XT-60 Connector
    • Also a balancing lead
    • 2200mah - $14.99

    LiPo-2S-2200

    $14.99

    Power Board - PRO SERIES - Black (4106)

    Power Board - PRO SERIES - Black (4106)

    Untitled Document All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

    Description:

    Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.


    These new versions offer SEVERAL new features:
    1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
    2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
    3) TOUCH button programming to select your warning voltage
    4) Wires to your RX are PRE-installed
    5) Enclosed lightweight and strong plastic housing
    6) XT-60 Connectors

    The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

    You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

    These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

    They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.





    Watch this video for an overview of the different versions


    View this video for a full explanation on how to use these power boards




    Features:


    Black Power Board (4106)

    • Dual battery redundancy for safer flying
    • LCD display which shows real time info of your in and out voltages
    • Built in regulator that supplies a clean 5v to your receiver
    • Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
    • 8 channels in, 16 channels out (+ ignition)
    • Electronically isolated for interference free flying
    • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
    • Ability to use High voltage servos while providing a clean 5v to your RX
    • Battery balancing (draws extremely evenly from your dual battery set up)
    • Short Circuit protection (in the unlikely event of a short it will protect from battery drain)

      (input voltage MUST be between 6-13v. A 4S Life would be ideal)



    Specs:

    Black Power Board (4106)

    • Input Voltage: 6-13v
    • Working load: 0A to 30A
    • Weight: 4.5 oz.
    • Dimensions: 4.5"x2.5"x5/8"
    • Working Temperature: -20c to -85c



    Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.

    PB-4106

    $135

    Power Board - PRO SERIES - Red (4104)

    Power Board - PRO SERIES - Red (4104)

    Untitled Document All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

    Description:

    Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.


    These new versions offer SEVERAL new features:
    1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
    2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
    3) TOUCH button programming to select your warning voltage
    4) Wires to your RX are PRE-installed
    5) Enclosed lightweight and strong plastic housing
    6) XT-60 Connectors

    The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

    You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

    These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

    They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.





    Watch this video for an overview of the different versions


    View this video for a full explanation on how to use these power boards




    Features:

    Red Power Board (4104)

    • Dual battery redundancy for safer flying
    • LCD display which shows real time info of your in and out voltages
    • Built in regulator that supplies a clean 5v to your receiver
    • Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
    • 8 channels in, 16 channels out (+ ignition)
    • Electronically isolated for interference free flying

      (We recommend our LiFe batteries and 6v servos with this unit - be sure to select ones with XT connectors for this use)



    Specs:

    Red Power Board (4104)

    • Input Voltage: 5-13v
    • Working load: 0A to 20A
    • Weight: 3 oz.
    • Dimensions: 4.5"x2.5"x5/8"
    • Working Temperature: -20c to -85c




    Recommended Set ups: Use the Red Power Board for 30-50cc planes using 6v servos. Use 2 LiFe batteries, and "jump" power down from an open servo port on the board, to run to your ignition

    PB-4104

    $99

    Power Board - PRO SERIES - Yellow (4105)

    Power Board - PRO SERIES - Yellow (4105)

    Untitled Document All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

    Description:

    Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.


    These new versions offer SEVERAL new features:
    1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
    2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
    3) TOUCH button programming to select your warning voltage
    4) Wires to your RX are PRE-installed
    5) Enclosed lightweight and strong plastic housing
    6) XT-60 Connectors

    The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

    You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

    These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

    They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.





    Watch this video for an overview of the different versions


    View this video for a full explanation on how to use these power boards




    Features:

    Yellow Power Board (4105)

    • Dual battery redundancy for safer flying
    • LCD display which shows real time info of your in and out voltages
    • Built in regulator that supplies a clean 5v to your receiver
    • Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
    • 8 channels in, 16 channels out (+ ignition)
    • Electronically isolated for interference free flying
    • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
    • Ability to use High voltage servos while providing a clean 5v to your RX

      (Please note the input voltage for this unit MUST be between 7v-13v. A 4S LiFe would be ideal)



    Specs:

    Yellow Power Board (4105)

    • Input Voltage: 7-13v
    • Working load: 0A to 30A
    • Weight: 3.5oz.
    • Dimensions: 4.5"x2.5"x5/8"
    • Working Temperature: -20c to -85c



    Recommended Set ups: Yellow board for 30cc to 100cc or larger using ANY servos.

    PB-4105

    $119

    Power Boards - Black (2104)

    Power Boards - Black (2104)

    Untitled Document ALL NEW 2000 SERIES!

    Description:

    Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFE batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

    These new versions offer SEVERAL new features:
    1) Wires to your RX are PRE-installed
    2) Enclosed lightweight and strong plastic housing
    3) XT-60 Connectors


    *Please note that unlike the 4000 Series, the 2000 Series does not have an LCD display. It is recommended that you have a battery checker so you know the voltage of your batteries. You can get more info here

    The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

    You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

    These Power Boards also features LED lights to give you indication of if your batteries are connected and working properly.

    Check out the Power Board LED HERE


    They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

    To see basic set up – please see our PRO series video Here





    Features:

    Black Power Board (2104)
    • Dual battery redundancy for safer flying
    • Built in regulator that supplies a clean 5v to your receiver
    • Integrated CDI remote cut off (OPTO KILL) switch to kill your engine
    • 8 channels in, 16 channels out (+ ignition)
    • Electronically isolated for interference free flying
    • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
    • Ability to use High voltage servos while providing a clean 5v to your RX
    • Battery balancing (draws extremely evenly from your dual battery set up)
    • Short Circuit protection (in the unlikely event of a short it will protect from battery drain)
      (input voltage MUST be between 6-13v. A 2-3 cell lipo or 3 cell life would be ideal - be sure to select 3s LiFe with XT connectors)



    Specs:

    Black Power Board (2104)

    • Input Voltage: 6-13v
    • Working load: 0A to 30A
    • Weight: 4.5 oz.
    • Dimensions: 4.5"x2.5"x5/8"
    • Working Temperature: -20c to -85c



    Recommended Set ups: Black power board for 50cc to 100cc or bigger, using ANY servos. Use 3cell LIFES for servos 7.4v or lower (or a 3s Lipo for even HIGHER voltage HV servos). You can "jump" power from a servo port but you will need to add a small in line regulator to knock it down to 6v or lower if you are using high voltage servos

    PB-2104

    $84.99

    Power Boards - Red (2102)

    Power Boards - Red (2102)

    Untitled Document ALL NEW 2000 SERIES!

    Description:

    Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFE batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

    These new versions offer SEVERAL new features:
    1) Wires to your RX are PRE-installed
    2) Enclosed lightweight and strong plastic housing
    3) XT-60 Connectors


    *Please note that unlike the 4000 Series, the 2000 Series does not have an LCD display. It is recommended that you have a battery checker so you know the voltage of your batteries. You can get more info here

    The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

    You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

    These Power Boards also features LED lights to give you indication of if your batteries are connected and working properly.

    Check out the Power Board LED HERE


    They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

    To see basic set up – please see our PRO series videoHere




    Features:

    Red Power Board (2102)

    • Dual battery redundancy for safer flying
    • Built in regulator that supplies a clean 5v to your receiver
    • Integrated CDI remote cut off (OPTO KILL) switch to kill your engine
    • 8 channels in, 16 channels out (+ ignition)
    • Electronically isolated for interference free flying
      (recommend our LIFE batteries and 6v servos with this unit - be sure to select ones with XT connectors for this use)



    Specs:

    Red Power Board (2102)

    • Input Voltage: 5-13v
    • Working load: 0A to 20A
    • Weight: 3 oz.
    • Dimensions: 4.5"x2.5"x5/8"
    • Working Temperature: -20c to -85c



    Recommended Set ups:

    Red board for 30-50cc planes using 6v servos. Use 2 LIFE batteries, and "jump" power down from an open servo port on the board, to run to your ignition

    PB-2102

    $64.99

    Power Boards - Yellow (2103)

    Power Boards - Yellow (2103)

    Untitled Document ALL NEW 2000 SERIES!

    Description:

    Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFE batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

    These new versions offer SEVERAL new features:
    1) Wires to your RX are PRE-installed
    2) Enclosed lightweight and strong plastic housing
    3) XT-60 Connectors

    *Please note that unlike the 4000 Series, the 2000 Series does not have an LCD display. It is recommended that you have a battery checker so you know the voltage of your batteries. You can get more info here

    The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

    You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

    These Power Boards also features LED lights to give you indication of if your batteries are connected and working properly.

    Check out the Power Board LED HERE

    They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

    To see basic set up – please see our PRO series videoHere




    Features:


    Yellow Power Board (2103)

    • Dual battery redundancy for safer flying
    • Built in regulator that supplies a clean 5v to your receiver
    • Integrated CDI remote cut off (OPTO KILL) switch to kill your engine
    • 8 channels in, 16 channels out (+ ignition)
    • Electronically isolated for interference free flying
    • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
    • Ability to use High voltage servos while providing a clean 5v to your RX
      (please not the input voltage for this unit MUST be between 7v-13v.



    Specs:

    Yellow Power Board (2103)

    • Input Voltage: 7-13v
    • Working load: 0A to 30A
    • Weight: 3.5oz.
    • Dimensions: 4.5"x2.5"x5/8"
    • Working Temperature: -20c to -85c




    Recommended Set ups: Use the Yellow Power Board for 30cc to 100cc or larger using ANY servos.

    PB-2103

    $74.99

    2S JST Male to Female Extension 12"

    2S JST Male to Female Extension 12"

    Description:
    1 piece: 2S JST Male to Female Extension

    This is a 12" extension for JST connections. This will allow you to mount your LiFe battery to an inaccessible area and route the wire to where you can easily balance charge it as needed. (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger

    Fully compatible with Redwing RC LiFe batteries

    1 Male to Female JST 12" extension

    EX-JST-XH-2S

    $1.99

    4S Pulse LiPo Batteries

    4S Pulse LiPo Batteries

    Untitled Document

    Description:

    Pulse Lithium Polymer Batteries - Setting a New Standard.

    As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored. 

    Designed specifically for the demands of the latest power plants, not to mention the new realm of extreme 3D flight, Pulse brings a whole new battery to bear at a cost never seen before. Simply put, premium power no longer comes at a premium price.

    Incorporating the latest advancements in Lithium Polymer technology, Pulse Batteries are designed to bring performance levels to a new stratosphere with 35C, 45C, and 65C battery packs in multiple capacities for the helicopter of your choice. Add the 5C charge rates, and the fun just begins. 

    Pulse Lithium Polymer Batteries - Can You Feel Your Pulse Quicken?

    Pulse Batteries Available Individually or in a PRE-MADE System!

    Take the guesswork out of your electric battery set up- we've done it for you! Check out the suggested set up systems for 30cc and 50cc.

    LiPo 4500mah 5S, 18.5v - $104.99 each

    30cc 10S System: Two (2) LiPo 4500mah 5S, 18.5v - $208

    • Voltage: 18.5V
    • Cell Count: 5S
    • Capacity: 4500mAh
    • Discharge Rate: 45C
    • Dimensions: 159mm x 45mm x 38mm (LxWxH)
    • Weight: 630g
    • Balance Tap: JST-XH


    LiPo 3300mah 45C 6S, 22.2v - $94.99 each

    30cc 12S System #1: Two (2) LiPo 3300mah 45C 6S, 22.2v - $188

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 3300mah
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 139mm x 42mm x 43mm  (LxWxH)
    • Weight: 567g
    • Balance Tap: JST-XH


    LiPo 3700mah 45C 6S, 22.2v - $109.99 each

    30cc 12S System #2: Two (2) LiPo 3700mah 45C 6S, 22.2v - $218

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 3700mAh
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 138mm x 44.5mm x 48mm (LxWxH)
    • Weight: 567g
    • Balance Tap: JST-XH


    LiPo 4100mah 45C 6S, 22.2v - $119.99 each

    30cc 12S System #3: Two (2) LiPo 4100mah 45C 6S, 22.2v - $238

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 4100mAh
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 137mm x 53mm x 42mm (LxWxH)
    • Weight: 680 grams
    • Balance Tap: JST-XH


    LiPo 5000mah 45C 6S, 22.2v - $139.99 each

    50cc 12S System #1: Two (2) LiPo 5000mah 45C 6S, 22.2v - $278

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 5000mah
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 158mm x 45mm x 49mm  (LxWxH)
    • Weight: 800g
    • Balance Tap: JST-XH


    LiPo 5500mah 45C 6S, 22.2v - $149.95 each

    50cc 12S System #2: Two (2) LiPo 5500mah 45C 6S, 22.2v - $298

    • Voltage: 22.2V
    • Cell Count: 6S
    • Capacity: 5500mah
    • Discharge Rate: 45C
    • Charge Rate: 5C
    • Dimensions: 160mm x 44.5mm x 52mm  (LxWxH)
    • Weight: 873g
    • Balance Tap: JST-XH


    LiPo 6000mah 35C 6S, 22.2v - $149.99 each

    50cc 12S System #3: Two (2) LiPo 6000mah 35C 6S, 22.2v - $298

    • Cell Count: 6S 22.2V
    • Capacity: 6000mah
    • Discharge Rate: 35C
    • Charge Rate: 5C 
    • Dimensions: 160mm x 49mm x 51mm  (LxWxH)
    • Weight: 884g
    • Balance Tap: JST-XH

     

    Purchase pre-made system or buy individually! Select below.


    PLU45-37004

    $69.99