Dualsky Accessories

Dualsky Accessories


Products

Dualsky XM 3542 EA-5 Motor

Dualsky XM 3542 EA-5 Motor

Dualsky XM 3542 Motor

DS-XM3542-EA-5

$52.99

Dualsky XM4250 EA-9 Motor

Dualsky XM4250 EA-9 Motor

DualSky 4250 Motor

DS-XM4250-EA-9

$62.99

Dualsky XM5050 EA-9 Motor

Dualsky XM5050 EA-9 Motor

Untitled Document

Overview

The DUALSKY XM 5050, 480 KV motor is an ideal motor for any 60” aerobatic plane weighing about 5 lbs (+/- all up weight with batteries).  The motor is recommended for EXTREME performance, and high energy 3d.  For a lighter set up for slow and low 3d, please choose the Dualsky 4250 for this plane size. 

The DUALSKY XM 5050 motor has been redesigned and now has better magnets, better bearings and decreases the air gap to increase efficiency and performance. The DUALSKY XM 5050 brushless motor includes mounting hardware, as well as a prop adapter and bullet plugs.

 

Recommended Set ups
4.5 to 5.5 lb. 3d/aerobatic plane

    • 6S Battery (3500-3800 mah)
    • Dualsky 100amp ESC (or similar)
    • 15x7 or 15x8 Prop (or similar)

Features

  • Improved front cover, better heat dissipation.
  • Increased the rigidity of the rotor and shell to reduce vibration
  • Tile magnets with high grade.
  • Higher efficiency laminations.
  • Reduced the air gap of the stator and rotor to increase efficiency.
  • Thicker high temperature enameled wire, improved insulation and impact resistance.
  • More options for KV value, suitable for practical use.
  • Motor mounting holes and shaft diameter compatible with CA Series.
  • Accessories compatible with the CA series (except for new models).
  • 8mm propeller mount with the thinner threads, propeller not easy to loose.

Specifications

  • KV:   480RPM/V  
  • Weight:  9.9oz / 281g
  • Diameter:  49mm
  • Length:  48mm
  • Diameter of Shaft:  6.0mm
  • Mounting holes pitch:  30/30mm
  • Slots,Poles:  12,14 
  • Idle Current(Io) @10V:  1.6A
  • Resistance(Ri):  25mOhm
  • Cruising power[8 mins]:  683W
  • Bursts current[15s]:  56A
  • Peak power[15s]:  1242W
  • Recommended ESC: XC10036HV V2
  • Max. weight of sport models: 7.5lb / 3.4kg
  • Max. weight of 3D models: 5.5lb /  2.3kg

 



DS-XM5050-EA-9

$97.99

Dualsky XC-45-Lite ESC

Dualsky XC-45-Lite ESC

Untitled Document

Overview

The new Dualsky XC-45-LITE speed control is economically priced and perfect for 2-3S LiPO powered aircraft. The Dualsky XC-45-LITE speed control is compatible with the Dualsky ProgCard V2 and has a burst rating of 60A. The BEC is rated at 5.2V 3A and will punch this out all day unlike other low priced speed controls.

This ESC works well with the Dualsky XM 3542, 950KV motor


Specifications

  • Dimensions: 67x 25x 7mm(L x W x D)
  • Weight: 38g (with wires)
  • Number of Cell:
    • LiPo 2-3s, 7.4-11.1V
  • Resistance(Ri)(Ohm): 0.0026
  • Max Cont.  Current & Max Cont.Output: 45A, 500W
  • Max Burst Current & Max Burst Output: 60A, 666W
  • BEC / Dissipative Power: 5.2V/3A (Linear)
  • Programmable: Throttle + ProgCARD V2
  • Signal Wire: 300MM JR

 

DS-XC-45-LITE

$24.99

Dualsky XC6018 BA V2 ESC

Dualsky XC6018 BA V2 ESC

Untitled Document

Overview

The Dualsky XC6018BA V2 speed controller has soft, linear control characteristics, and minimal internal resistance and minimum power loss at 8 kHz clock frequency. Simple programming via optional ProgCard or USB link.  Version "V2.X" has a Governor Mode (40-130A types), linear brake and USB connection.

This ESC works well with the Dualsky XM 4250, 500KV motor.


Features

  • The new designed 2nd version software and hardware have many new features.
  • Supports all motor types up to 210,000 rpm(2 Poles motors).
  • Extremely low resistance, factory high quality MosFETs, for high current usage.
  • Dualsky Governor Mode(DGM) ready.
  • Adjustable cut-off, either motor stop or reduction in power.
  • DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter when switch on.
  • Full protection features including: Low voltage cut-off, Over heating protection, signal loss auto cut-off.
  • Normal, Soft or Super-Soft start up modes available, for both fixed wing and helicopter setups.
  • Smooth and accurate throttle control throughout the range.
  • Throttle digital signal sampling, compatible with the signal frequency of 14 ms Normal mode and 7 ms high-speed mode (HS Mode).
  • Throttle range can be re-calibrated, so suitable for all brands of transmitter.
  • Fully PC programmable when used with Dualsky USB link.
  • Compatible with programming card for easy re-programming at the field!
  • UBEC switching power supply, support up to 6S Lipo, 3A, easily support 4-5pcs of standard Digital Servos.

Specifications

  • Dimensions: 75x 30x 14mm(L x W x D)
  • Weight: 63g
  • Number of Cells:
    • LiPo 2-6, 7.4-22.2V
  • Resistance(Ri)(Ohm): 0.0022
  • Max Cont.  Current & Max Cont.Output: 60A, 1260W
  • Max Burst Current & Max Burst Output:  80A, 1632W
  • BEC / Dissipative Power: 5.5V/3A (Swiching)
  • Programmable: Throttle + ProgCARD V2
  • Input Wires: 120mm, 14AWG, DC3
  • Output Wires: 75mm, 14AWG, DB4
  • Signal Wire: 300MM JR

 

DS-XC-6018-BA-v2

$59.99