Power HD Servos

Power HD Servos

Power HD Servos

Products

Hi Tec Servo Grease

Hi Tec Servo Grease

This is for use with all manufacturers' servo gear sets. To use, simply disassemble servo, throughly clean all old grease off gears, and use new grease sparingly during reassembly. Or add to new servos that don't have enough to start.

The grease (.1 oz) comes in a small toothpaste-like metal tube

HS-58450-grease

$4.95

Power HD 1201MG

Power HD 1201MG

Description:
The Power HD 1201mg is a great servo for 30cc sized planes. A great servo, even without the price considered, but at less than $15 a piece, these servos are an amazing value for your 30cc plane, or smaller. The 1201 mg has great speed and great torque and cetners well. If you are on a budget, the 1201mg is a perfect servo for your project. Our servos are "Factory Fresh" and we guarantee them upon arrival to be free of defect.



Specifications:

  • Torque:
    • 165 oz/in at 4.8V (12.20 kg-cm)
    • 180 oz/in at 6V (13.20 kg-cm)

  • Speed:
    • .16 sec at 4.8V
    • .14 sec at 6V

  • Voltage: 4.8v to 6v
  • Weight: 2.11 oz (60g)
  • Size:1.6 x .8 x 1.55 in (40.7 x 20.5 x 39.5 mm)

  • Modulation: Analog
  • Gear Type: Metal Geared

HD-1201mg

$15.99

Power HD 1207TG

Power HD 1207TG

Description:

The Power HD 1207TG is excellent low profile digital servo that has metal housing around the middle which allows for heat to rapidly dissipate. With double ball bearings you will have smooth movement and powerful torque when you need it. You cant beat the performance of this servo and at such a great price it's a no-brainer.

 

Specs:

  • Torque:
    • 97.21 oz/in at 4.8V (7.0 kg/cm)
    • 111.10 oz/in at 6V (8.0 kg/cm)

  • Speed:
    • 0.10 sec at 4.8V
    • 0.09 sec at 6V

  • Voltage: 4.8 ~ 6.0 DC Volts
  • Weight: 1.69 oz (48 g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)

  • Operating Temp - -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • Coreless Motor
  • Middle Aluminum Casing With Plastic Top and Bottom
  • Double Ball Bearings
  • Copper & Aluminum Gears

HD-1207TG

$39.99

Power HD 1212  HV 7.4V

Power HD 1212 HV 7.4V

Description:

This quality Power HD 1212TH digital servo boosts titanium gear sets and high torque even at 6 volts. Offering even higher torque and speed at 7.4v

FULLY Compatible with 7.4V power sources. HIGH reliablity rating.


Specifications:

  • Torque:
    • 170 oz/in at 6V (12kg.cm)
    • 200 oz/in at 7.4V (14kg.cm)

  • Speed:
    • .12 sec at 6V
    • .10 sec at 7.4V

  • Voltage: 6.0V to 7.4V
  • Weight: 2 oz (57 g)
  • Size: 1.58 x .79 x 1.46 in (40.3X20.2X37.2 mm)

  • Dead Band: ≤2uSec
  • Operating Current: 300mA / 400mA
  • Motor: Coreless Type
  • Ball bearing: 2BB
  • Gear: Titanium
  • Connector wire: 300mm
  • Plug: JR Type
  • Operating Temperature Range: -20c+60c

 

HD-1212TH

$48.99

Power HD 1214 HV 7.4V

Power HD 1214 HV 7.4V

Description:
The Power HD 1214-TH servo is is a premium High Voltage servo at a non premium price. The 1214TH is coreless, with titanium gears, with a heatsink on the outside of the case, digital for precise response, double ball bearing, Delivering 230oz/in at 7.4v, and a .12sec response time. The Power HD 1214-th is a great option for a 20cc to 50cc plane and will drive it with extreme precision and strength.

It is $20 less than the Hitec 7985MG, but Delivers 50oz/in more torque, is faster, has titanium gears and overall better performance. The 1214TH will make you want to accept nothing else!



Specifications:

  • Torque:
    • 200oz/in at 6V (14kg/cm)
    • 230oz/in at 7.4V (16kg/cm)

  • Speed:
    • .14 sec at 6V
    • .12 sec at 7.4V

  • Voltage: 6v - 7.8
  • Weight: 2.3oz (65g)
  • Size: 1.6 x .78 x 1.4 in (41x20x37 mm)

  • Modulation: Coreless Digital
  • Gear Type: Titanium Alloy/metal
  • Double Ball Bearing

HD-1214TH

$49.99

Power HD 1501MG

Power HD 1501MG

Description:
A great servo, even without the price considered, but at less than $18 a piece, these servos are an amazing value for your 50cc plane, or smaller. Our servos are "Factory Fresh" and we guarantee them upon arrival to be free of defect.



Specifications:

  • Torque:
    • 215 oz/in at 4.8V (15.50 kg-cm)
    • 235 oz/in at 6V (17.00 kg-cm)

  • Speed:
    • .16 sec at 4.8V
    • .14 sec at 6V

  • Voltage: 4.8v to 6v
  • Weight: 2.11 oz (60g)
  • Size: 1.6 x .8 x 1.5 on (40.7 x 20.5 x 39.5 mm)

  • Modulation: Analog
  • Gear Type: Metal Geared

HD-1501mg

$17.99

Power HD 1800A

Power HD 1800A

Description:

The HD-1800A is a great servo for tiny applications like foam planes. The lead is terminated with a standard “JR”-style connector, which is Futaba-compatible. Mounting screws and an assortment of servo horns is included with this servo. You can find more information about this servo in this  

Click to Download HD-1800A Data Sheet


Specifications:

  • Torque:
    • 13.8 oz/in at 4.8v (1.2 kg/cm)
    • 18 oz/in at 6v (1.5 kg/cm)

  • Speed:
    • .11 sec at 4.8V
    • .08 sec at 6V

  • Voltage: 4.8v to 6v
  • Weight: .28oz (8g)
  • Size: .82 x .46 x 1.04 in (20.8 x 11.6 x 26.5 mm)

  • Analog
  • Free-run current at 6V: 140mA
  • Stall current at 6v: 460 mA
  • Lead Length: 6 in
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes

HD-1800A

$4.99

Power HD 1900A

Power HD 1900A

Description:

The HD-1900A is a great servo for tiny applications like foam planes. The lead is terminated with a standard “JR”-style connector, which is Futaba-compatible. Mounting screws and an assortment of servo horns is included with this servo. You can find more information about this servo in this  

Click to Download HD-1900A Data Sheet


Specifications:

  • Torque:
    16.7 oz/in at 4.8V (1.2 kg/cm)
    20.8 oz/in at 6V (1.7 kg/cm)

  • Speed:
    0.11 sec at 4.8V
    0.08 sec at 6V

  • Voltage: 4.8v to 6v
  • Weight: .32oz (9g)
  • Size: .9 x .48 x 1.14 in (23 x 12.2 x 29 mm)

  • Analog
  • Free-run current at 6V: 140mA
  • Stall current at 6v: 830 mA
  • Lead Length: 6 in
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes

HD-1900A

$5.50

Power HD Brushless "BLS" 0804 HV

Power HD Brushless "BLS" 0804 HV

Untitled Document

Description:

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)

  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V

  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)

  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-BLS-0804-HV

$65.00

Power HD Brushless "BLS" 2007 HV

Power HD Brushless "BLS" 2007 HV

Untitled Document

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

The Power HD BLS 2007 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD BLS 2007 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD BLS 2007 servos before they're gone!

 

Specs:

  • Torque:
    • 236 oz/in at 6V (17 kg/cm)
    • 277 oz/in at 7.4V (20 kg/cm)

  • Speed:
    • .09 sec at 6V
    • .07 sec at 7.4V

  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.25 oz (64g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 39.0mm)
  • Operating Temp - -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears

HD-BLS-2007-HV

$75.00

Power HD Brushless "BLS" 2809 HV

Power HD Brushless "BLS" 2809 HV

Untitled Document

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

The Power HD BLS 2809 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD BLS 2809 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD BLS 2809 servos before they're gone!

 

Specs:

  • Torque:
    • 319 oz/in at 6V (23 kg/cm )
    • 389 oz/in at 7.4V (28 kg/cm)

  • Speed:
    • .11 sec at 6V
    • .09 sec at 7.4V

  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.25 oz (64g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 39.0mm)

  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears

HD-BLS-2809-HV

$79.50

Power HD Coreless D21 HV

Power HD Coreless D21 HV

Untitled Document

Description:

Similar to the Storm series of our new Power HD servos - the high voltage D-series are a coreless servo with the same hardened aluminum case and splash water protection.

These HD D21 servos are capable of 7.4 volts in 12 seconds and are made with the finest titatanium and aluminum gears. The long lasting coreless motor guarantees quality performance for a lifetime at lower temperatures.

Durable!

Dynamic!

InDestructible!

Distinguished!

Dirt Cheap!

Dapper! - The "D" in our new Power HD D21 high voltage servos stands for all of these things and MORE!

 

Specs:

  • Torque:
    • 243 oz/in at 6V (17.5 kg/cm)
    • 291.6 oz/in at 7.4V (21 kg/cm)

  • Speed:
    • .14 sec at 6V
    • .12 sec at 7.4V

  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.64 oz (75g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
  • Operating Temp - -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • CORELESS Motor
  • Double Ball Bearings
  • Titanium and Aluminum gears
  • Water resistant O-Rings


HD-D21-HV

$69.00