Switches and Wires

New special offers are available!
more offers

Switches and Wires


Products

Demon 3 Axis Gyro System

Demon 3 Axis Gyro System

Untitled Document

Demon 3-AXIS GYRO
 

This is a ground-breaking 3-axis stabilization system. The gyro CORTEX is high-quality, reliable, and universal. Whether you have a Parkflyer, a 3D Acro model, or turbine jet, this gyro will fit your aircraft. The cortex has 100% reliable sensors and the latest soft-ware algorithms. Everything is in a remarkably small CNC-milled aluminum housing. With this gyro system you will notice a difference- flying around, landing, and strong or gusty winds are no longer a problem.

IMMEDIATELY 'READY TO RUN'. SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT. 

The Cortex does not require any PC or additional software settings - unless it is desired. You don’t want to wait and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier. 

COMPATIBLE. UNIVERSAL. STRONG. THE VERSATILITY LEAVES NOTHING TO BE DESIRED.

The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed online at any time.

SCOPE OF DELIVERY & GADGETS. GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES. 

Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".

 

Click Here for Demon Gyro Manual

 

Video Playlist:

 

Includes:
·  bavarian DEMON CORTEX incl. adhesive pads
·  Connection cable harness
·  Jumper for programming

*Gyro come in two options so be sure to select the correct one:

  • Without USB Cable
  • With USB Cable


BD-CORTEX

$249

Demon Gyro USB Cable

Demon Gyro USB Cable

Untitled Document

Demon Gyro USB Cable

This is the USB Cable, for the Demon-Gyro click here


 

This is a ground-breaking 3-axis stabilization system. The gyro CORTEX is high-quality, reliable, and universal. Whether you have a Parkflyer, a 3D Acro model, or turbine jet, this gyro will fit your aircraft. The cortex has 100% reliable sensors and the latest soft-ware algorithms. Everything is in a remarkably small CNC-milled aluminum housing. With this gyro system you will notice a difference- flying around, landing, and strong or gusty winds are no longer a problem.

IMMEDIATELY 'READY TO RUN'. SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT. 

The Cortex does not require any PC or additional software settings - unless it is desired. You don’t want to wait and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier. 

COMPATIBLE. UNIVERSAL. STRONG. THE VERSATILITY LEAVES NOTHING TO BE DESIRED.

The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed online at any time.

SCOPE OF DELIVERY & GADGETS. GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES. 

Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".

 

Click Here for Demon Gyro Manual

 

Video Playlist:

 

 

BD-PCADAPTER

$40.00

Female to Female Servo Extension Converting Wire

Female to Female Servo Extension Converting Wire

Description:

3” Female to female servo extension. This wire allows you to easily and quickly convert an item ending in a male plug to a female. This often has applications in our hobby, allowing you to essentially change the plug at the end of your battery or other electronics from a male to a female without having to cut and re-solder.


EX-FF3

$3.99

Large Switch - with Charge Jack

Large Switch - with Charge Jack

Description pending...

SW-02

$8.99

Male to Male Servo Extension Converting Wire

Male to Male Servo Extension Converting Wire

Description:

3” male to male servo extension. This wire allows you to easily and quickly convert an item ending in a female plug to a male. This often has applications in our hobby, allowing you to essentially change the plug at the end of your battery or other electronics from a female to a male without having to cut and re-solder


EX-MM3

$3.99

Micro Deans Connectors

Micro Deans Connectors

Description:
5 Pairs of Deans Style Connectors

Nylon T-connectors. These are VERY similar to Dean's style T connectors, and are fully compatible with Deans connectors.
Pack includes 5 male and 5 female connectors.



These connectors are made from Nylon, making them very tough and difficult to melt, even with the worst of soldering skills.
 





Features:

  • Durable nylon connectors
  • Compatible with Deans large connectors
  • Easy to solder
  • Positive/negative can only connect one way ensuring proper polarity



PRICE FOR PACKS OF 5 PAIR:

EX-Micro

$4.95

Miracle Replacement Switch

Miracle Replacement Switch

Replacement Switch and wire for Miracle switches.

With this switch and wire, you can easily replace a switch in a Miracle RC product. Perfect for if you have a crash and you want to be sure the switch is in perfect working condition. Or if you accidently damage your Miracle switch while working with it.

Just simply unscrew your old Miracle switch, loosen the grub screw that holds the plastic plug, and place the new one in. In about 5 minutes you'll have a brand new conditioned Miracle switch

MS-R

$4.99

MPI Charge Switch with On-board Battery Checker

MPI Charge Switch with On-board Battery Checker

Untitled Document

Description:

MPI Charge switch with LED indicator for HiTec and JR leads and on-board battery checker! The three LEDs - green, yellow, & red - monitor the status of the flight pack. It is designed to test the battery under the actual load of the on-board equipment.

The switch is factory preset to 4.8V applications - but for 6V use, simply cut the jumper loop on the back of the switch and seal the wires with silicone glue or tape. The jumper wires can be reconnected for 4.8V operation.

Features:

  • Heavy duty switch and wires
  • Sturdy one-piece design
  • Built-in Redundancy
  • 3-LED on-board battery checker
  • Compatible with 4.8v and 6v Rx packs
  • Easy installation and operation
  • Silicone shock mount included
  • DSC compatible
 

MPI-5470

$25.00

Optical Kill Switch

Optical Kill Switch

Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference



Features:
  • Includes a remote mountable bright LED to indicate when the ignition is armed.
  • Fiber Optic coupled input/output.
  • Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
  • Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
  • Low to 3Volt 3amp output.
  • Low Voltage Drop-Less than 150mv.
  • 100% Surface Mount Technology.
  • Heavy Gauge Wires,universal connectors.
  • Small and light weight –only 0.3 OZ!(8g)
  • Reverse Bettery input protection.
  • Shut down the transmitter power or receiver to cut off automatically when kill engine


Opto

$19.99

RC Exl Servo Y

RC Exl Servo Y

Description:
Our 6” heavy-duty Y-harnesses are perfect for standard servos up to 1/4 scale servos. They offer 22awg wire, gold plated connectors and thick wire jackets. Y-junction located in the middle of the harness and is a solid plastic housing rather than the cheaper heat shrink Ys.

Perfect for getting 2 leads out of one RX port.

1 servo Y per unit:

EX-Y

$2.99

RCexl Mini Tachometer

RCexl Mini Tachometer

Description:
You can use this RCexl mini tachometer to hook up directly to the ignition on the JC 28cc, or DLE engines to be able to view your RPM's at a glance. You can mount this mini-tach in your cockpit, or other visible area, and it runs off the battery power already supplied to your ignition. This is the newest RCexl (RCxl RCexcel) Version



Specifications:
  • Input Voltage between 3.5 and 8.4 volts
  • Current Consumption 25-60mA
  • Size: 41mmx17mmx12mm
  • Weight: .3oz



Features:
  • Indicates up to 30,000 RPM
  • Has and ULTRA-Bright LED so it can be easily read in daylight
  • Standard Futaba plug
  • Includes a Y Harness


Mini-Tach

$15.99