Browse ALL planes

Browse ALL planes


Products

30cc Slick 540 Re-Design Orange

30cc Slick 540 Re-Design Orange

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

30-SLKFW-O

$429

30cc Slick 540 Re-Design- Green

30cc Slick 540 Re-Design- Green

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

30-SLKFW-G

$429

58" Extra 330 (70e)

58" Extra 330 (70e)

30cc Extra Red

 

Videos:</p>
<p>
<br />
<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/GAgax5rE1kw" width="630"></iframe></p>
<p>
<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/42e5nPGnITU?rel=0" width="640"></iframe><br />
<br />
<!-- Specs:         Specs:         Specs:         Specs:         Specs:           --><font color="#999999" face="Arial, Helvetica, sans-serif" size="4"><strong>Specifications:</strong></font></p>
<ul>
 
 

 


Build & Ship Plane

70E-Extra-B

$299.00

B-26 Marauder 1500mm (59") Wingspan

B-26 Marauder 1500mm (59") Wingspan

Description:

RedwingRC Plug-and-Play aircraft!

Check out this really interesting design in the Warbird series- The Messerschmitt BF-110. This is such a great plane and because its constructed with damage resistant EPO foam it is very durable and will last along time. The Messerschmitt BF-110: 2X the motors, 2X the fun!!!

This model come with Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

Video:

 

Key Features:

  • 6 Servos - Flaps factory installed (requires a servo reverser to use the flap servos)
  • Factory installed retracts with spring loaded retract door
  • Dual powerful dectrum motors installed
  • Spring loaded retract doors

 

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 44.17in (1122mm)
Flying Weight: 1900g
Motor Size: 2 x BM 3512-850kv
Propeller: 2 x (10 x 6 x 3)
Radio / Transmitter: NOT INCLUDED (requires 6ch radio for flaps and retracts- not included)
Receiver: +5 Channel (NOT INCLUDED)
Servos: 6 servos installed ( 6 x 9g)
Speed Control : 2 x Dectrum 40Amp Installed
Battery: 14.8V 2200 mah 25C (not included)
Charger: NOT INCLUDED
Flight Times:

Average 5-7 Minutes

Assembly Time:

45min - 60 mins

 

 



DY8972SV

$249.00

Beechcraft Model D17 Staggerwing Micro RTF

Beechcraft Model D17 Staggerwing Micro RTF

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

RGRA1109

$159.99

BF 110 Messerschmitt

BF 110 Messerschmitt

Description:

RedwingRC Plug-and-Play aircraft!

Check out this really interesting design in the Warbird series- The Messerschmitt BF-110. This is such a great plane and because its constructed with damage resistant EPO foam it is very durable and will last along time. The Messerschmitt BF-110: 2X the motors, 2X the fun!!!

This model come with Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

Video:

 

Key Features:

  • 6 Servos - Flaps factory installed (requires a servo reverser to use the flap servos)
  • Factory installed retracts with spring loaded retract door
  • Dual powerful dectrum motors installed
  • Spring loaded retract doors

 

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 44.17in (1122mm)
Flying Weight: 1900g
Motor Size: 2 x BM 3512-850kv
Propeller: 2 x (10 x 6 x 3)
Radio / Transmitter: NOT INCLUDED (requires 6ch radio for flaps and retracts- not included)
Receiver: +5 Channel (NOT INCLUDED)
Servos: 6 servos installed ( 6 x 9g)
Speed Control : 2 x Dectrum 40Amp Installed
Battery: 14.8V 2200 mah 25C (not included)
Charger: NOT INCLUDED
Flight Times:

Average 5-7 Minutes

Assembly Time:

45min - 60 mins

 

 



DY8963

$249.00

Boeing C17 Globemaster III RC Ducted Fan Airplane Model 1380mm Wingspan

Boeing C17 Globemaster III RC Ducted Fan Airplane Model 1380mm Wingspan

Boeing C17 Globemaster III RC Ducted Fan Airplane Model 1380mm Wingspan

MF-C17

$425.99

$399.99

Catalina PBY - Blue

Catalina PBY - Blue

Description:

RedwingRC Plug-and-Play aircraft!

Now this is a unique plane for sure! Upgrade that asphalt runway of yours to a pond, lake or pool! The PBY Catalina seaplane is something you have to experience! It took months of flight testing and designing to produce this amazing aircraft. The Catalina is capable of stable flight at really slow speeds making it perfect for any skill level. Get ready for some really neat details and a large 55 inch wingspan! The Catalina is blast to fly and and landing on on water is a piece of cake.

Key Features:

  • Powerful twin 480 size (1100kv) outrunner brushless power system w/ 3-bladed props
  • Twin 30A Brushless ESC with Switch-Mode BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Suitable for Both Intermediate and Experienced Pilots.
  • Removable / detachable wing. (4 screws)

 

Specifications:

Wingspan: 58 inches / 1470mm
Overall Length: 37 inches / 940mm
Flying Weight: 45oz  / 1275 w/Battery
Motor Size: Twin 480 size (2814-1100kv) outrunner brushless motors (installed)
Propeller: 2 x 3 blade props 8 x 6 x 3
Radio / Transmitter 4 Channel (NOT INCLUDED)
Receiver +4 Channel (NOT INCLUDED)
Servos: 4 servos installed ( 2 x 9g - 2 x 17g)
Speed Control : 1 x Dectrum 30A Brushless with Switch-Mode BEC (installed)
Battery: 11.1V 2200 mah (not included)
Charger: 3S+ (11.8v) Lipo Charger (NOT INCLUDED)
Flight Times

Average (8-12 mins)

Assembly Time

Approx 45min

 

 



DY8943-BLUE

$179.99

Cessna L-19 Ultra-Micro Indoor Laser-Cut Wood Model Kit (PNP Electric Power version)

FREE SHIPPING

FREE SHIPPING

Cessna L-19 Ultra-Micro Indoor Laser-Cut Wood Model Kit (PNP Electric Power version)

Cessna L-19 Ultra-Micro Indoor Laser-Cut Wood Model Kit

DW-K1204

$74.90

Cessna-188 - Orange

Cessna-188 - Orange

Description:

RedwingRC Plug-and-Play aircraft!

The Dynam RC C188 can handle low speeds and altitude like a champ! The design of the C-188 has been perfected to give you the most enjoyable flight experience and control. Plus there is factory installed flaps!!! This is a great plane to learn on and a great chance to get used to a low-wing aircraft.

All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying, extend the flaps on landing for a perfect touchdown in any surface due to the fixed landing gear.

Build time is around 45- 60 min from box to air. Expect flight time to be from 8-15 minutes, just depends on how fast you fly.

 

Key Features:

  • Factory Installed Flaps Servos and Flap Hinges for slower / shorter landings
  • Powerful Detrum BM3170-500kv brushless motor
  • 40A Brushless ESC with Switch-Mode BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Deans / T-Plug installed

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 39.6in (1005mm)
Flying Weight: 1300g w/Battery
Motor Size: BM 3170 500kv (installed)
Radio / Transmitter 5 Channel Required - NOT INCLUDED
Receiver 5+ Channel (not included)
Servos: 6 x 9g (Installed)
Speed Control : Detrum 40A Brushless with Switch-Mode BEC (installed)
Battery: 14.8V 2200 mah 25C (Not Included)
Charger:  
Flight Time: 8 to 15 Minutes


DY8967-ORANGE

$199.00

$169.99

Dynam Devil 3D

Dynam Devil 3D

Description:

RedwingRC Plug-and-Play aircraft!

Get ready for some fun flying! This biplane is built for performing just about every maneuver you can think of. Capable of 3D and aerobatic flight making this dynamic plane a winner. Hours and hours of excitement! Another outstanding aerobatic plane from Dynam RC. This model is the plug and play version. All the servos, brushless motors, and control surfaces are factory ready. All you will need to supply is the 5 channel radio, receiver, 4S 2600 Lipo battery and of course, charger.

 

Key Features:

  • EPO Construction (damage resistant)
  • Great Looking paint / color scheme
  • Powerful 3720 dectrum brushless motor (650kv)
  • Outstanding details
  • 50Amp Speed Controller
  • Upgraded Tail Feather Servos

 

Specifications:

Wingspan: 40in (1016mm)
Overall Length: 44.5in (1130mm)
Flying Weight: 51.2oz (1450g)
Motor Size: BM3720 650kv (Installed)
Propeller: 13 x 6 (2 bladed)
Radio / Transmitter 4 Channel (NOT INCLUDED)
Receiver 4+ Channel (not included)
Servos: 4 servos total (2 x 9g & 2 x 17g) - Installed
Speed Control : 50Amp (dectrum) - Installed
Battery: 14.8V Li-Poly 2200 mah (NOT INCLUDED)
Charger:  
Flight Times

5-10 minutes

Assembly Time

 

 

 



DY8954

$189.99

$169.99

Dynam Trojan T28 - Red

Dynam Trojan T28 - Red

Description:

RedwingRC Plug-and-Play aircraft!

The Dynam T28 Trojan is a great plane for both beginners and experienced pilots! Just getting started in the hobby or just want to try something new, this plane is for you. The Trojan T28 is made with EPOFLEX (EPO) foam- a damage resistant foam. This aircraft is painted with the famous US Air force color scheme. All surfaces are constructed out of the EPO foam so it is not easily damaged and easily repaired. The Trojan is very stable and is a blast to fly! This is a Plug-and-Play aircraft so it will arrive about 80% complete and included cool scale features such as a clear canopy, retractable landing gears and steerable nose landing-gear .

Build time is around 60 min from box to air.

Expect flight time to be from 6-10 minutes per battery.

 

Key Features:

  • Powerful BM3715 - 890KV outrunner brushless power system
  • 30A Brushless ESC
  • Retractable landing gears
  • Durable and lightweight EPO construction with many surface details
  • Detailed Body Structure
  • Suitable for both, beginner thru experienced Pilots
  • Easy to build
  • Scale 3 blade prop


Specifications:

Wingspan: 50 inch (1270mm)
Overall Length: 39.37 (1000mm)
Flying Weight: 47.61 (1340g) w/Battery
Motor Size: BM3715A-KV890 (installed)
Propeller: 3 Blade - 11 x 7 x 3
Radio / Transmitter 5 Channel Required - NOT INCLUDED
Servos: 4 servos installed ( 4 x 9g )
Speed Control : 1 x Dectrum 30A Brushless
Battery: 11.1V 2200 mah LiPo 20C (Not Included)
Charger: NOT INCLUDED basic 2S - 3SS lipo charger
Flight Times Average (6-10 mins)
Assembly Time

Approx  60min

 

 



DY8940-RED

$179.99

$169.99