General Accessories

Miracle Shock-Absorbing Engine Mount

Description:

This shock absorbing engine mount is perfect for engines 20cc a smaller. Simply install the mount into the firewall and then attach the engine to the mounts. The channel allows you to adjust the distance between the firewall and the engine. Sturdy aluminum design provides strength while the rubber washers dampen vibrations.

This engine mount works best with 20cc or less and will absorb the shock/ vibrations during engine running. CNC mount with viton washer. The miracle "shock-absorbing" engine mount can prevent damage to electronic parts and the airplane structure.

Specifications (Approx):

• Length: 97 mm
• Width: 14 mm
• Viton washers
• Includes hardware to attach mount to firewall








 
•  
•  
•  
•  
•  

Description:

Wire Clips

These are great wire clips to tame those messy wires in your plane. 3M adhesive strips on the back so they stay where you put them. Use them keep wires neat for easy identification and clean install.

10 wire clips per bag.
 

16oz Smoke Tank
[email protected]

*Fourtitude has had to amend their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Take the guesswork and worry out of properly setting up a smoke system in your aircraft with these easy to use 4titude smoke tanks!

We've been receiving a few requests for the smoke tanks and as usual Redwing RC has LISTENED! Introducing the Fourtitude Smoke Tanks available now at Redwing RC! You're welcome :-)

Video:

Features:

• Crystal Clear allowing quick visual checks of any possible pollutants in your smoke tank.
• Lightest weight commercially available R/C smoke tank on the market. Many cases less than half the weight of the older roto molded “standard” tanks.
• Aerospace Mil spec sealant used in assembly to assure the tank will hold up to many high G loaded flights!
• Incredibly resilient and truly seamless tank body with a threaded on closure
• No rubber stopper to crack, leak, or split your tank apart.
• Detailed installation instructions.
  
  Fourtitude R/C RTU Smoke tanks include: A high quality double sided hook and loop mounting strap, precut to shape foam mounting pad, and Fourtitude R/C blue fuel line to plumb your aircraft. Everything you need to get smoking up the sky ASAP!
  
  These crystal clear plastic tanks are square shaped which makes mounting into your aircraft very simple. Every tank is QC pressure leak tested.

  16oz Fourtitude SMOKE tank

20oz Smoke Tank
[email protected]

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Take the guesswork and worry out of properly setting up a smoke system in your aircraft with these easy to use 4titude smoke tanks!

We've been receiving a few requests for the smoke tanks and as usual Redwing RC has LISTENED! Introducing the Fourtitude Smoke Tanks available now at Redwing RC! You're welcome :-)

Video:

Features:

• Crystal Clear allowing quick visual checks of any possible pollutants in your smoke tank.
• Lightest weight commercially available R/C smoke tank on the market. Many cases less than half the weight of the older roto molded “standard” tanks.
• Aerospace Mil spec sealant used in assembly to assure the tank will hold up to many high G loaded flights!
• Incredibly resilient and truly seamless tank body with a threaded on closure
• No rubber stopper to crack, leak, or split your tank apart.
• Detailed installation instructions.
  
  Fourtitude R/C RTU Smoke tanks include: A high quality double sided hook and loop mounting strap, precut to shape foam mounting pad, and Fourtitude R/C blue fuel line to plumb your aircraft. Everything you need to get smoking up the sky ASAP!
  
  These crystal clear plastic tanks are square shaped which makes mounting into your aircraft very simple. Every tank is QC pressure leak tested.

  20oz Fourtitude SMOKE tank

The NEW Fortitude V2 gas tanks are here!!!

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

Video:

V2 Features:

• Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.


• Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.


• Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.


• Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.


• We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

• Size: 8 ounce (236 ML)
  • Length 5 3/8” x Width 1 7/8" x Height 1 7/8” (136.5 x 49.5 x 49.5 mm)
• Weight: 1 ounce
• Fittings are part of the cap/ internal tubing
• Filtered clunk
• Super light!
• Crystal clear
• Seamless
• Includes: Tank/foam/velcro
• Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

The NEW Fortitude V2 gas tanks are here!!!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

Video:

V2 Features:

• Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.


• Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.


• Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.


• Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.


• We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

• Size: 20 ounce (591 ML) - Length 7 5/8” x Width 2 5/8" x Height 2 5/8” (193.5 x 66.5 x 66.5 mm)
• Weight: 1.75 ounces
• Fittings are part of the cap/ internal tubing
• Filtered clunk
• Super light!
• Crystal clear
• Seamless
• Includes: Tank/foam/velcro
• Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

Carbon Fiber Landing Gears for EPP Planes

Available in two styles to fit the Future Model MX2, Yak55, Sbach, and Katana

Dimensions (match the below information to the inset photo)

• MX2 Style
• A=85mm
• B=135mm
• C=20mm taper to 10mm
• D=20mm
• E=250mm

• Yak Style
• A=65mm
• B=140mm
• C=20mm taper to 10mm
• D=20mm
• E=255mm

The Yak style gear will work for the Future Model Sbach and the MX2 style gear will work for the Katana.

Tech Aero IBEC

RedwingRC Plane Covers

Miracle Neck Strap Adapter / Transmitter Balancing Arm

Miracle Wheel Stand

Pilot - "Joe"