This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Single & Dual Sensor Tester Universal Sensor Timing Device Ignition Hall Sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

RCEXL CDI Ingition Tester, Rcexl CDI Electronic Signal Generator Ignition box Test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

RCEXL High Current Electronic Switch, Rcexl 70A brush motor start electronic switch V2.0  <35cc engines use

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

Description:

This is a timing and testing kit for RC gas engines.

This kit will allow you to check the working condition of your ignition without needing to restart the engine.

Analog engine speeds between 400 RPM ~ 20000 RPM can be used to check for interferences and radio range check.

An LED will light up when everything is working properly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

Silver Fuel Dot (Plastic)

 

Replacement Switch and wire for Miracle switches.

With this switch and wire, you can easily replace a switch in a Miracle RC product. Perfect for if you have a crash and you want to be sure the switch is in perfect working condition. Or if you accidently damage your Miracle switch while working with it.

Just simply unscrew your old Miracle switch, loosen the grub screw that holds the plastic plug, and place the new one in. In about 5 minutes you'll have a brand new conditioned Miracle switch