Browse ALL Parts

Browse ALL Parts


Products

 AR Mounting Plate for PinFlag and LED

AR Mounting Plate for PinFlag and LED

Description:

Booma RC

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.



BRC-567

$8.95

 Smart Switch Battery Redundancy Switch with Pin Flag and Battery Watch Technology

Smart Switch Battery Redundancy Switch with Pin Flag and Battery Watch Technology

Description:

Booma RC

If you want a switch that offers complete dual battery balancing and redundancy with an ultra-small footprint for your scale model then look no further. The new Booma RC intelligent redundant battery balancing switch is the answer.

This switch works with any single or dual battery system. Works with battery chemistry and voltage range from 2.5v to 28v. It comes with a Pin Flag and Ultra Bright Blue LED which can be mounted discretely on your scale model. The Pin Flag controls the internally mounted switch and battery redundancy circuit. The result - beautiful scale appearance with dual battery redundancy peace of mind.

This new balancing technology offers zero voltage drop battery balancing and redundancy which means it can handle huge loads without generating heat. This also means your receiver and servos get all the power unlike conventional battery balancing which loses precious power as heat.

Package Includes:

  • 1 x Pin Flag Switch with mounting hardware.
  • 1 x Ultra Bright Blue LED with mounting hardware.
  • 1 x Dual Battery Balancing power switch circuit.
  • 2 x sets of Input and Output JR connectors.


Specs:

  • Ultra low foot print for the best scale looks.
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD. Battery voltage range can be from 2.5volts to 28 volts.
  • Capable of handling input voltages up to 28volts.
  •  Minimal external footprint - All you see on the outside of your model is a 3mm Pin Flag socket and (if required) an ultra-high bright Blue LED. The Pin Flag controls the internal power switch and dual battery redundancy.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
  •  Maximum Battery Power Balancing - In a dual battery system HS1 draws current proportionally from both batteries while moving both batteries to a complete load balance situation. This means you get the maximum capacity out of both batteries all the time.
  • 2 x 25 amp independent circuits. HS1 is 2 x 25amp circuits into a high power matching battery redundancy circuit. HS1 actually uses 4 x 50 amp rated FET circuits for battery power matching. We passively rate HS1 at 25amps per circuit.

BRC-431-JR

$99.00

 XPERT A1 AS-8601-HV STANDARD SIZE SERVO

XPERT A1 AS-8601-HV STANDARD SIZE SERVO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider --

This is the Xpert AS-6501-HV A2 Standard Size Aluminum Servo.

Torque

– @8.4V: 348.94 oz-in/ @8.4V: 25.14 kg-cm

– @7.4V: 304.95 oz-in/@7.4V:21.97 kg-cm

Speed

– @8.4V: .096 sec/45°

– @7.4V: .104 sec/45°

Dimensions: 40x20x37.8mm

Weight: 71g

Matching Gear Set: XGS73780

 

GET YOURS TODAY!

HAD-AS-8601-HV

$114.99

$109.99

1 ft TruCote Covering

1 ft TruCote Covering

Heat shrink covering for RC planes

Please contact us for information on if your plane is using Ultracote, or TruCote before ordering if you are unsure

Description:
TruCote covering is a high tech polyester covering that is sensative to heat which makes it easy to apply to your plane. It offers high adhesion, fuel proof/waterproof covering for your plane. Easy to apply using a heat gun and/or iron.

  • Specs:
  • Width: 23.5”
  • Temp to adhesion: Approximately 250 degrees F
  • Shrinkage begins: Approximately 275 degrees F
  • Maximum recommended temp: Approximately 300 degrees F

For instructions on how to apply covering here is a helpful tutorial:

http://www.rc-airplane-advisor.com/heat-shrink-covering.html


Sold in 1 Foot Sections. Please select how many feet you want.

Please put what plane this is for at checkout so that we can match it!

TCC-BLU-1(dark)

$2.00

10 Pack Hinges (Robart Style)

10 Pack Hinges (Robart Style)



This package of 10 Pin Hinges are high quality steel pin hinges desinged to join your surfaces with strong free momvement. Built in the "Robart" style of hinge, they are strong and light and offer a high quality connection to your moving surfaces for 20cc or bigger planes

These hinges will install by drilling a 3/16" hole and inserting the hinge with a bit of glue.

---

Check out these Videos:



 

 





SS-Hinge

$3.59

2 Gallon Red Gas Fuel Tank with Electric Pump

2 Gallon Red Gas Fuel Tank with Electric Pump

Description:

This can is pre assembled with battery and ready to go it just needs fuel.  You can use this can with the ease of safety with the steel can and the spark arrester this safety can meets all requirements for [D.O.T] safest can in the industry. This gas can has a spring blow by lid for pressure release.

 

Contents of the Fueler
- 2 gallon steel safety can
- 3 feet of recoil fuel lines for easy and quick fueling
- Funnel for easy pour
- 9.9v 3s 2100mah battery
- On/off switch with charge jack
- Fire and water resistant box that contains all items
- Miracle fuel filling nozzle
- Pick up fuel filter and filter in fuel nozzle for double filtration

***Important to note is that this new fueler is metal and not plastic for safety reasons***

 


 

JMR 2 SPE

$229.95

2.0RHP-R Gas Hand Pump

2.0RHP-R Gas Hand Pump

Description:

This can is pre assembled with battery and ready to go it just needs fuel.  You can use this can with the ease of safety with the steel can and the spark arrester this safety can meets all requirements for [D.O.T] safest can in the industry. This gas can has a spring blow by lid for pressure release.

 

Contents of the Fueler
- 2 gallon steel safety can
- 3 feet of recoil fuel lines for easy and quick fueling
- Funnel for easy pour
- 9.9v 3s 2100mah battery
- On/off switch with charge jack
- Fire and water resistant box that contains all items
- Miracle fuel filling nozzle
- Pick up fuel filter and filter in fuel nozzle for double filtration

***Important to note is that this new fueler is metal and not plastic for safety reasons***

 


 

JMR 2 RHP

$69.95

20cc Alunimum Landing Gear

20cc Alunimum Landing Gear

20cc Aluminum Landing Gears

AL-LG-20

$19.99

2S JST Male to Female Extension 12"

2S JST Male to Female Extension 12"

Description:
1 piece: 2S JST Male to Female Extension

This is a 12" extension for JST connections. This will allow you to mount your LiFe battery to an inaccessible area and route the wire to where you can easily balance charge it as needed. (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger

Fully compatible with Redwing RC LiFe batteries

1 Male to Female JST 12" extension
 

EX-JST-XH-2S

$1.99

3-in-1 UBEC/CDI Kill Switch with Dual LED color Voltage Alarm

3-in-1 UBEC/CDI Kill Switch with Dual LED color Voltage Alarm

Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference



Features:

  • Includes a remote mountable bright LED to indicate when the ignition is armed.
  • Fiber Optic coupled input/output.
  • Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
  • Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
  • Low to 3Volt 3amp output.
  • Low Voltage Drop-Less than 150mv.
  • 100% Surface Mount Technology.
  • Heavy Gauge Wires,universal connectors.
  • Small and light weight –only 0.3 OZ!(8g)
  • Reverse Bettery input protection.
  • Shut down the transmitter power or receiver to cut off automatically when kill engine


SW-UBEC-CDI-2122

$22.95

$19.95

30cc / 50cc Wheel Pants

30cc / 50cc Wheel Pants

Replacement wheel pants for our 30cc & 50cc planes. These work for both the sizes of planes. Please select color choice.
Sold in pairs.
Please contact us with any questions.

PNT-O

$19.99

30cc Black MXS Bach Replacement Fuse

30cc Black MXS Bach Replacement Fuse

30cc Black MXS Bach Replacement Fuse

?10

$129.99