HiTec 5645mg

Contact UsCustomer Reviews

HiTec 5645mg

Market Price: $69.95
Our Price:

$45.99


You Save

34%

Quantity (10)

Availability 10 in stock
Weight 0.31 lbs
SKU HS-5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
: *
: *
: *
 

Metal Clevis With Solid Brass Screw (10 pcs)

Metal Clevis With Solid Brass Screw (10 pcs)  

VP-ACC04-Clevis-screw

$9.99

Brass Collet with Tension Screw and Pin (10 pcs)

Brass Collet with Tension Screw and Pin

VP-ACC01-1-Collet-Pin

$22.99

1/4 Scale Turnbuckles,1/16" (1.5mm) Eye & 4-40 Threaded (2 pcs)

1/4 Scale Turnbuckles,1/16" (1.5mm) Eye & 4-40 Threaded (2 pcs)

DUB300

$15.99