Power Board - PRO SERIES - Black (4106)

Contact UsCustomer Reviews

Power Board - PRO SERIES - Black (4106)

Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Power Board - PRO SERIES - Black (4106)
Our Price:

$169.00


Quantity (3)

Availability 3 in stock
Weight 1.00 lbs
SKU PB-4106
Manufacturer RCCSKJ

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

These new versions offer SEVERAL new features:
1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
3) TOUCH button programming to select your warning voltage
4) Wires to your RX are PRE-installed
5) Enclosed lightweight and strong plastic housing
6) XT-60 Connectors
7) 9th channel can be connected to the gear channel or other switch type channel to provide ignition CUT OFF (CDI Kill Switch)

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos). 

You can Plug in, up to 8 servos into the board, which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause). Note: the 4th and 5th channel has 3 outputs allowing control of 3 servos at the sametime, for example [(1) left flap/lower dive brake, (2) center flap and (3) right flap/lower dive brake]

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

**Please note the input voltage for this unit MUST be between 7v-13v. Our 4S LiFe batteries would be ideal for this unit, providing selectable voltage from 4.8v to 10.9v to the servos. If using 3S LiFe (9.9v), the approximate adjustable voltage to servos would be 4.8v-7.6v and 3S LiPo (11.1v) will provide approximate selectable voltage 4.8v-9.7v to the servos.



Watch this video for an overview of the different versions


View this video for a full explanation on how to use these power boards




Features:


Black Power Board (4106)

  • Dual battery redundancy for safer flying
  • LCD display which shows real time info of your in and out voltages
  • Built in regulator that supplies a clean 5v to your receiver
  • Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
  • 8 channels in, 16 channels out (+ ignition)
  • Electronically isolated for interference free flying
  • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
  • Ability to use High voltage servos while providing a clean 5v to your RX
  • Battery balancing (draws extremely evenly from your dual battery set up)
  • Short Circuit protection (in the unlikely event of a short it will protect from battery drain)

    **Please note the input voltage for this unit MUST be between 7v-13v. Our 4S LiFe batteries would be ideal for this unit, providing selectable voltage from 4.8v to 10.9v to the servos. If using 3S LiFe (9.9v), the approximate adjustable voltage to servos would be 4.8v-7.6v and 3S LiPo (11.1v) will provide approximate selectable voltage 4.8v-9.7v to the servos.


Specs:

Black Power Board (4106)

  • Input Voltage: 6-13v
  • Working load: 0A to 30A
  • Weight: 4.5 oz.
  • Dimensions: 4.5"x2.5"x5/8"
  • Working Temperature: -20c to -85c


Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.

: *
: *
: *
 

Distribution Panel (Power Board) Switch with Voltmeter

switch, Distribution Panel (Power Board) Switch, RCCSKJ

Rccskj-DP-switch-2105

$17.99

LiFe Batteries 2S

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 1450mah - 2.8oz,
    • 2100mah - 4oz,
    • 3100mah Life - 5.5oz
  • Size:
    • 1450mah- 15mm x 34mm x 87mm,
    • 2100mah- 12mm x 50mm x 106mm,
    • 3000mah- 130mm x 45mm x 15m
  • Voltage: 6.6Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 2 cells (2s)
  • 14gauge Wire
  • Connectors: Two Options!
    • T Connector (T connector that fit a standard Dean)
    • XT-60 Connector. Choose Below
  • Also a balancing lead

Be sure to select the XT connector if purchasing for use with our Power Box PRO's. Please select connector type: Deans or XT.
 

 

 

  • 1450mah - $15.99
  • 2100mah - $25.99
  • 3000mah - $39.99
     

LiFe

$16.99

Servo Safety Clips

Description:
10 pack of servo safety clips. Made to retain your servo wires to keep them from slipping off during flight.

A must have to to ensure your servo connectors stay securely connected.

Packs of 10:

EX-clip

$4.95

10 Pack Hinges (Robart Style)



This package of 10 Pin Hinges are high quality steel pin hinges desinged to join your surfaces with strong free momvement. Built in the "Robart" style of hinge, they are strong and light and offer a high quality connection to your moving surfaces for 20cc or bigger planes

These hinges will install by drilling a 3/16" hole and inserting the hinge with a bit of glue.

---

Check out these Videos:



 

 


 

 

 

 

SS-Hinge

$4.99