RCEXL Pro Smoke Pump System

Contact UsCustomer Reviews

RCEXL Pro Smoke Pump System

Our Price:

$49.99


Quantity (15)

Availability 15 in stock
Weight 0.50 lbs
SKU rcexl-PRO Smoke
Manufacturer RCEXL

Introducing the Pro Smoke Pump System! These light weight pumps are a simple design and economical way to enter the world of smoke aerobatics. 

-All new diaphragm pump provides optimized smoke/gasoline ratio controlled in a reasonable range for sufficient atomization.
-Adopting low power motor, the smoke pump can be directly powered by receiver. No need for extra batteries. The pump weighs only 85g.
-Directly driven mode, no need of complicated program settings, just need 1 channel for controlling. 

Basic Set up:

First connect the pump to the receiver, fuel filters, muffler and smoke tank (see drawing to help with this).Plug your radio connector into the switched channel (such as landing gear or flaps). Turn on radio, make sure switch is off (100% negative) for at least 5 seconds and turn on. If the pump pushes fluid toward the muffler, the set up is correct. If it tries to pump toward the tank, reverse the wires connected to the receiver.

Radio Set up:

Non programmable Radios

Use a switched channel to switch the Smoke pump on and off. Since there is no trim control on a switched channel, the flow rate is consistent. When the switch is on, flow will be at maximum. We can set the END POINT/ATV of radio switch channel to control the maximum flow rate so as to control the smoke density.

Programmable Radios

Plug the smoke signal wire into a spare channel (such as the 8th channel). Set this channel program mixing the Throttle channel, then set a switch for programming mixing on/off to control smoke pump on/off. Adjust the END POINT/Travel of this channel to control smoke pump flow rate so as to control the smoke density. For more detailed information please see your radio manual.

Specifications:

  • Dimensions(L*W*H): 56*22.5*35.5mm
  • Weight: about 68g
  • Pump Style: Membrane
  • Voltage: 4.8-8.4V
  • Barb Connection: 3mm

Smoke Pump Instructions:

: *
: *
: *
 

MULTIPLEX (MPX) Triple Servo Harness 6" Male 6" Female (3 Channels 1 Plug) 20 AWG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:
Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

MPX-Triple-6/6

$17.99

Mini DLG V3 with Ailerons (P3K Competition version) 990mm - PNP (Blue)

Mini DLG V3 with Ailerons (P3K Competition version) 990mm - PNP 

GT-DLGV3

$199.99

FrSky X20 Tandem 2.4GHz Transmitter Bundle (Black) w/R8 Pro & R9MX Receiver

FrSky X20 Tandem 2.4GHz Transmitter Bundle (Black) w/R8 Pro & R9MX Receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)














  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

FRK-0308400

$389.00