Bat-Safe 12" Balancing Cable Extension Set (5)

Contact UsCustomer Reviews

Bat-Safe 12" Balancing Cable Extension Set (5)

Market Price: $13.99
Our Price:

$9.99


You Save

29%

Quantity

OUT OF STOCK


Availability No items available
Weight 0.10 lbs
SKU Bat-Safe-Bal-Ext

Description: JST-HX Balance Wire Set for Bat-Safe and Bat-Safe XL

The Bat-Safe Balance Cable Set consist of five 12” long Balance Extension wires with JST-XH connectors that can be used for LiPo balancing, charging, or discharging. Any charger that uses an XH balance board or plug can accept these extensions and is a perfect solution moving the battery away from the charger and use for the Bat-Safe charging boxes.

The package includes the following extensions (these can be interconnected for extended lengths):

  • (1) 2s JST-XH 3 Wire Balance Cable
  • (1) 3s JST-XH 4 Wire Balance Cable
  • (1) 4s JST-XH 5 Wire Balance Cable
  • (1) 5s JST-XH 6 Wire Balance Cable
  • (1) 6s JST-XH 7 Wire Balance Cable

1 set required for your regular size Bat-Safe Battery Charging Safe Box, as standard balancing wires are too short! 12 inches (300mm) long.

For the New Bat-Safe XL Battery Charging Safe Box, requires 2 sets of balance wires for a total length of 24 inches (600mm) long.

These 12" extensions can also be used as JST extensions for your aircraft allowing pilots to mount a LiFe battery to an inaccessible area and route the wire to an area where it can easily be balanced charged (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger).

Fully compatible with Redwing RC LiFe batteries

 

: *
: *
: *
 

BAT-SAFE XL Lithium Battery Charging Box

BAT-SAFE XL Lithium Battery Charging Box 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This flame retardant bag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage.

Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***

 

Dimensions:

  • Small: 7.25"x 8.75"
  • Large: 9"x11.5"

 

 

 

BAT-SAFEXL

$139.99

BAT-SAFE Lithium Battery Charging Box

BAT-SAFE Lithium Battery Charging Box

ag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage.

Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***

 

Dimensions:

  • Small: 7.25"x 8.75"
  • Large: 9"x11.5"

 

 

 

BAT-SAFE

$59.00

24" Charge/Balance Lead Extension Kit

24" Charge / Balance Lead Extension Kit

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

EX-HRP-RCE1615

$17.99

FUTABA R7003SB FASST 2.4GHz 3-Channel BiDirectional High Voltage Receiver For aircraft models

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)


  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01102197-1

$109.99

50cc EXTRA 330SC - Red

Description:

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

 

Product Manual
 

 

 

 

 




Specifications:*(More Coming Soon)*

  • Wing span: 2260mm / 88.97"
  • Wing area: 1480 sq. inches
  • All up flying weight: 16.4 lbs
  • Length: 2065mm / 84.3"
  • Cowl
    • Inside diameter: 10.5" (266.7mm)
    • Inside height: 8.75" (222.25mm)













    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
  • Engine: DLE 55, DLE 55RA
  • Radio: 6 channel recommended (4ch possible)
  • Recommended Spinner Size:
  • Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
  • Recommended Prop Size:
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |

 

 

 


 

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Carbon fiber landing gear and accessories
  • Carbon fiber Rei enforcements:
    • CF stringers in fuse
    • CF stringers in wings
    • CF wing reinforcement tubes
    • CF retention pins in stabs/wings
  • Fiberglass stab mounts
  • Painted matching spinner (Optional)
  • Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
  • NOW COME WITH SIDE FORCE GENERATORS!

 

 




tml', 'popup', 'width=500,height=500'); return false">DLE 35ra DLE55


Build & Ship Plane

50-EXTRA-R-SS

$689.00

Throttle Arm Extension (#3)

Universal Throttle Arm Extension (#3)

New Throttle Arm!

This extension provides extra room between throttle arm and choke arm.  Remove the existing throttle arms from the carb and slide this extension arm in place and tighten the set screws.

Specifications:

  • Height- 16mm
  • Includes two set screws
  • Efficient design

SS-TSA-3

$10.99