Hitec D930SW High-Speed Steel Gear Servo (13kg/182oz [email protected])
The power of Hitec’s D-Series servos continues with the introduction of the next Premium Class trio: the D930SW, D954SW and D955TW. As with our entire “D” line, these technologically-advanced servos are powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. Their unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. Built with incredibly durable steel gears, the D930SW is the perfect upgrade from our popular HS-8330SH servo. Advancing servo technology and providing superior engineering has always been Hitec’s mission and that continues today as we expand our outstanding D-Series product line. FEATURES
|
Performance Specifications | |
Operating Voltage Range (Volts DC) | 4.8V ~ 7.4V |
Speed (Second @ 60°) | 0.11 ~ 0.07 |
Maximum Torque Range oz. / in. | 112 ~ 182 |
Maximum Torque Range kg. / cm. | 8.0 ~ 13.0 |
Current Draw at Idle | 30 mA |
No Load Operating Current Draw | 500 mA |
Stall Current Draw | 5,200 mA |
Dead Band Width | 1 µs |
Physical Specifications | |
Dimensions (Inches) | 1.57 x 0.78 x 1.46 |
Dimensions (Metric) | 40.0 x 20.0 x 37.0 |
Weight (Ounces) | 2.33 |
Weight (Gram) | 66.0 |
Circuit Type | 32bit Programable Digital |
Motor Type | Coreless Metal Brush |
Gear Material | MK 1st Gear & 3 Steel Alloy Gears |
Bearing Type | Dual Ball Bearing |
Output Shaft (type / Ømm) | H25T |
Case Material | Plastic / Aluminum |
Dust / Water Resistance | Splash Proof |
Connector Gauge (AWG) / Strand Count | 20 / 80 |
Radio Control Applications | |
Parkflyer | N / A |
Sport Plane | N / A |
Sailplane | N / A |
3D Performance | N / A |
Scale | N / A |
Electric Helicopter | 500mm |
Gas Helicopter | 50 - 59 Class |
On Road | 1/10th |
Monster Truck | 1/10th |
Buggies | N / A |
Truggies | N / A |
Short Course / Truck | N / A |
Crawlers | N / A |
Sail Boat | N / A |
Power Boat | N / A |
ACCESSORIES
- 3 Steel Alloy Gears Set | Link |
- Metal / Karbonite 1st Gear Set | Link |
- Plastic / Aluminum Case Set | Link |
- Applicable Horns & Screws
-
PROGRAMMABLE FUNCTIONS
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
Landing Gear for Yak 55 30cc
Carbon Fiber Landing Gear for Yak 55 30cc
|
CF-LG-30B5
$39.99
GT Power Motor Sensor Hall Tester
Description: This is a timing and testing kit for RC gas engines. This kit will allow you to check the working condition of your ignition without needing to restart the engine. Analog engine speeds between 400 RPM ~ 20000 RPM can be used to check for interferences and radio range check. An LED will light up when everything is working properly. |
GT-Hall tester
$10.95
Pro LiPo Battery Checker Multi Tool with Balance & Discharge Function
Pro LiPo Battery Checker Multi Tool with Balance & Discharge Function1-Cell Battery Charge Adapter - Micro JST/JST-PH The Venom 12 port 1 Cell Battery Charge Adapter allows you to quickly, and easily charge up to six micro batteries at a time off your existing LiPo charger. This handy charge adapter is a must have for anyone who wishes to charge multiple batteries with either Micro JST (MCPX) or JST-PH/Pico connectors. The Venom 12pack features 12 charging ports, self-settable fuses with LED indicator and comes with banana style input leads to make connection to your existing LiPo charger a snap. The Venom 12 port 1 Cell Battery Charge Adapter is perfect for charging batteries from the Parkzone Ultra Micro series, such as, Spitfire, Pole Cat, Corsair, Mosquito, Trojan, Night Vapor, SU-26, P-51, MCX2, MSR, MCPX, and many others.
|
VNR0699
$23.99