Booma RC Wallaby Switch II with Active Dual Battery Redundancy and Voltage Monitoring

Contact UsCustomer Reviews

Booma RC Wallaby Switch II with Active Dual Battery Redundancy and Voltage Monitoring

Our Price:

$59.00


Quantity (9)

Availability 9 in stock
Weight 0.28 lbs
SKU BRC-163-JR
Manufacturer Booma RC

Quick overview: Compact high power Digital Switch with active battery sharing and built in voltage Battery low voltage warning

Welcome version 2 of the all popular Wallaby Switch. We have added active battery redundancy and balancing as well as active low voltage warning to the worlds most compact high power intelligent switch for Radio Controlled and Robotics applications.

Wally offers digital microprocessor control to monitor the voltage of your models receiver batteries. Wally also employs the latest in micro power technology so you can keep Wally connected to your receiver batteries 24/7. The built in dual battery redundancy circuit ensures that if one battery fails it is completely isolated from the circuit. We have also added active battery balancing so both batteries are utilized to their maximum potential.

Add a Booma RC Wallaby Switch to your next project for peace of mind knowing your batteries are being watched 24/7

We offer several different connector options for Wallaby II. Please look below for standard connector options. If you have a special connector requirement that is not shown just send us an email [email protected] with your required specification.

 
Click Here to Download Wallaby Switch Instructions 

 

SPECIFICATIONS:

- Microprocessor control - of 2 x high powered digital switching circuits.

- Fail Safe Switching - of both batteries.

- High Bright LED - for easy daylight reading.

- Voltage Monitoring - of each battery.

- Selectable Battery Type - for monitoring of LifeP04, LiPo or Lion battery chemistries.

- Low Voltage Alarm via LED indication.

- 2 x 15 Amp constant current capability. (2 x 20 Amp for 30 seconds)

- Micro-Power Design less than 0.1mA in standby mode.

- Input Voltage 6v to 13v.

- Weight 17 grams.

- Dimensions 36mm x 17mm (1.41 x 0.66 inches).

FAQs: 

I am using one receiver and do I need to use a y connector to attach the batteries? I see there are 2 output leads. If only one lead is connected to the receiver l assume the switch will use the battery with the highest voltage. If one battery goes bad will the switch immediately switch over the the good battery.

YES--Connect one battery to each input of the Wallaby switch. The outputs of the Wallaby switch are internally connected so you can connect either or both outputs to the receiver.

This Switch is configured with JR inputs and JR outputs.  Special order configurations (Ultra inputs and JR outputs or Ultra inputs and Ultra outputs) can be ordered for an additional cost (1-2 weeks).

: *
: *
: *
 

AR Mounting Plate for PinFlag and LED

Description:

Booma RC

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.



BRC-567

$12.95

Multi-Switch (Dual Battery Redundancy switch with Fail-Safe Tech)

Multi-Switch (Dual Battery Redundancy switch with Fail-Safe Tech)

Booma RC

If you want a switch that offers complete dual battery balancing and redundancy with an ultra-small footprint for your scale model then look no further. The new Booma RC intelligent redundant battery balancing switch is the answer.

This switch works with any single or dual battery system. Works with battery chemistry and voltage range from 2.5v to 28v. It comes with a Pin Flag and Ultra Bright Blue LED which can be mounted discretely on your scale model. The Pin Flag controls the internally mounted switch and battery redundancy circuit. The result - beautiful scale appearance with dual battery redundancy peace of mind.

This new balancing technology offers zero voltage drop battery balancing and redundancy which means it can handle huge loads without generating heat. This also means your receiver and servos get all the power unlike conventional battery balancing which loses precious power as heat.

Package Includes:

  • 1 x Pin Flag Switch with mounting hardware.
  • 1 x Ultra Bright Blue LED with mounting hardware.
  • 1 x Dual Battery Balancing power switch circuit.
  • 2 x sets of Input and Output JR connectors.

 

 

Specs:

 

 

  • Ultra low foot print for the best scale looks.
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD. Battery voltage range can be from 2.5volts to 28 volts.
  • Capable of handling input voltages up to 28volts.
  •  Minimal external footprint - All you see on the outside of your model is a 3mm Pin Flag socket and (if required) an ultra-high bright Blue LED. The Pin Flag controls the internal power switch and dual battery redundancy.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
  •  Maximum Battery Power Balancing - In a dual battery system HS1 draws current proportionally from both batteries while moving both batteries to a complete load balance situation. This means you get the maximum capacity out of both batteries all the time.
  • 2 x 25 amp independent circuits. HS1 is 2 x 25amp circuits into a high power matching battery redundancy circuit. HS1 actually uses 4 x 50 amp rated FET circuits for battery power matching. We passively rate HS1 at 25amps per circuit.

TEMPORARILY BACK ORDERED. Add to cart to PRE ORDER and we will ship ASAP. Email us for updated estimated ship date.

BRC-761-Multi-Switch

$59.00

AR IBEC PRO IGNITION KILL SWITCH (HV)

AR IBEC PRO IGNITION KILL SWITCH

Booma RC

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.



BRC-1427-IBEC-Kill-Switch

$54.99