Dynam Meteor V3 70mm EDF Jet

RedwingRC Plug-and-Play aircraft!   

Check out this really interesting design in the Warbird series- The Messerschmitt BF-110. This is such a great plane and because its constructed with damage resistant EPO foam it is very durable and will last along time. The Messerschmitt BF-110: 2X the motors, 2X the fun!!!

This model come with Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

Video:

Key Features:

• 6 Servos - Flaps factory installed (requires a servo reverser to use the flap servos)
• Factory installed retracts with spring loaded retract door
• Dual powerful dectrum motors installed
• Spring loaded retract doors

Specifications:

Scorpion A-4220 Sport PNP Combo (6s/70E/2109w)

Thinking about converting your 50cc gas powered plane to electric power? Our 50cc size electric powerset combo takes the hassel out of figuring out exactly what you need because we've done it for you! By choosing one of our pre-grouped electric power combos, you are getting everything you need to convert your plane to electric power in one click of your mouse.

This combo includes the electric motor, the electric speed controller, a battery pack and a prop.

Features

• Hacker A60-18L High-End Brushless Motor
• Castle Creations Phoenix Edge 120HV Brushless Electric Speed Controller
• Two (2) Lightweight Aero-Model 5000 mAh 6 Cell 22.2V Battery Packs
• APC 24*12 Electric Prop

For those lucky people who have more than one plane be sure to check out our 20cc and 30cc Electric Powersets also!

Power HD B2S Brushless Servo - 50kg/cm (694.4 oz/in), 0.10sec - HV Mega Torque

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

Specs:

• Torque:
  • 105.54 oz/in at 6V (7.6 kg/cm)
  • 125.00 oz/in at 7.4V (9.0 kg/cm)
     
• Speed:
  • .055 sec at 6V
  • .042 sec at 7.4V
     
• Voltage: 6.0 ~ 7.4 DC Volts
• Weight: 1.58 oz (45g)
• Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
   
• Operating Temp- -20℃~60℃
• Working Frequency - 1520μs / 500hz
• Brushless Motor
• Ball Bearing x 2
• Titanium & Steel Gears