HiTec HS-5087MH HV Digital MG Micro Servo, .13sec/60oz @ 7.4v

Description:

The new GT Power Cellmeter-8 is a must have tool for the RC Hobbyist, not only is it capable of instantly checking the overall and individual cell voltage of Lipo/Life & Li-ion batteries (with balance plugs fitted) it can also give you an instant reading of the remaining capacity of the battery at the same time, so no guess work! The mode button also allows you to check highest and lowest individual cells and voltage differences between individual cells, finally, as well as the Lithium battery port, there is an additional receiver style 3 pin port for checking overall voltage on Nimh/Nicd RX batteries.

The new GT Power Cellmeter-8 is a simple, fast and brilliant way to check battery voltage and most importantly, help you determine the condition of your packs within seconds, it is the must have battery checker for the toolbox of every RC pilot/driver!
 

Features:
Mini size, super portability
High quality and exquisite craftsmanship
Designed for Li-Po, Li-Hv, Li-Fe, Li-ion, Nickel batteries, highly effectively manage your different batteries for better safety use
The input port supports the detection of up to 8S battery
Not only test voltage of each cell battery, but also discharge difference volume for balance
All Status Display: 3 button operation, easy to switch as you wish
Also acting as PPM servo tester

Specifications:
Brand name: G.T.POWER
Display: LED
Input voltage: 4.2 - 33.6V
Supported Batt. Type: LiPo, LiHv, LiFe, Li-ion, Ni-Cd
Balance Cells: 1~8S
Size: 85 * 55 * 10mm
Product weight: 50.4g

Package Information:
Package size: 16.5 * 11.5 * 2.5cm / 6.5 * 4.5 * 1in
Package weight: 72g / 2.6oz
Plastic package

Packing include:
1 * Battery Voltage Capacity Meter
1 * English Manual

XT60 Male to XT90 Female Connector Adapter

Description:
Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

• Male Deans T style plug to Male XT60
• Durable design
• Heatshrink seal

Zap CA Glue (Thin) 2oz Pink Bottle

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Works Best On:

• Rubber
• White Foam

Works Good On:

• Balsa Wood
• Soft Wood
• Hard Wood
• Glass & Metal
• Fiberglass
• Ceramics
• Hard Plastics
• Laminating
• Water-Resistant
• Reinforcing
• CA Hinges

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

Click to Download Safety Data Sheet