BAT-SAFE Lithium Battery Charging Box

Contact UsCustomer Reviews

BAT-SAFE Lithium Battery Charging Box

Market Price: $69.00
Our Price:

$59.00


You Save

14%

Charge/Balance Ext Kit
Quantity (10)

Availability 10 in stock
Weight 6.00 lbs
SKU BAT-SAFE

BAT-SAFE Battery Charging Safe Box

You should never leave batteries charging unattended. 

Designed by engineers who know how dangerous a LiPo battery fire inside a home can be. The guys at Bat-Safe are RC enthusiast and came up with a safe and awesome solution to store, transport and most importantly charge your LiPo batteries.
With a double insulated steel fire proof box, fiberglass and steel wool filter to filter the smoke and soot combine these and you control the intense heat and arrest the flames.
Not only is the Bat-Safe box perfect for storing and transporting your LiPo batteries safety it's charging your batteries that make this battery box stand out from the others.
Install the connecting wires from the charger to the battery via the insulated fire collar, clip the easy to use latch and your battery is safe to charge with the piece of mind that your LiPo battery inside the Bat-Safe can never cause a fire when charging. The Bat-Safe has a magnetically attached hardpoint for your charger to mount directly on the lid, Lightweight with a carry handle make this a perfect, safe solution when charging, transporting and storing your LiPo batteries.  Protect your home and make sure you never have a fire that could destroy the fun of your hobby. 

Features:
• Designed by engineers and RC enthusiast
• Charging, storing and transporting LiPos
• Fireproof battery safe 
• Double steel insulated walls
• Fiberglass and steel wool filter 
• Stops flames and intense smoke
• Easy to use latch and seal
• Fire collar grommet for wires to connect from charger to battery
• Magnetically attached mount for charger 
• Piece of mind when charging your batteries
• Lightweight with carry handle

Specs:
Size: 12 x 9 x 7 inches (300 x 220 x 160mm)  
Internal Dimensions: 9.5 x 6.5 x 4 inches (240 x 165 x 80mm)
Weight: 4 lbs (1920g)

You can charge 2x 6S 5000mAh batteries safely inside the unit.  If you need a larger charging box check out the BAT-SAFE XL available at REDWING RC

Extra-long balance cables may be necessary to use the BAT-SAFE with your existing charging equipment. Those are also available at Redwing RC. You can select the Charge/Balance Ext Kit in the drop down and save! Kit includes a 24" extension set that features male and female 4mm bullets for ease of connecting to any charge lead or squid, as well as a universal XH-type balance board and 24" balance lead extension set.




 

 

: *
: *
: *
 

BAT-SAFE XL Lithium Battery Charging Box

BAT-SAFE XL Lithium Battery Charging Box 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This flame retardant bag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage.

Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***

 

Dimensions:

  • Small: 7.25"x 8.75"
  • Large: 9"x11.5"

 

 

 

BAT-SAFEXL

$139.99

Bat-Safe 12" Balancing Cable Extension Set (5)

Description: JST-HX Balance Wire Set for Bate-Safe and Bat-Safe XL
1 piece: 2S JST Male to Female Extension

This is a 12" extension for JST connections. This will allow you to mount your LiFe battery to an inaccessible area and route the wire to where you can easily balance charge it as needed. (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger

Fully compatible with Redwing RC LiFe batteries

1 Male to Female JST 12" extension
 

Bat-Safe-Bal-Ext

$9.99

24" Charge/Balance Lead Extension Kit

24" Charge / Balance Lead Extension Kit

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

EX-HRP-RCE1615

$17.99

Venom Balance Board with Extra Long 24" Leads (JST-XH 2s-6S) (Good for Bat Safe and other charging boxes)

Venom Balance Board with Extra Long 24" Leads (JST-XH 2s-6S)

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Bal-Board-JST-XH-extra-long

$8.99

20cc EDGE 540 Profile - Yellow w/ Star Burst

New Design: 20cc Edge Profile

Now with Carbon Fiber Reinforcements!

SIDE FORCE GENERATORS INCLUDED!

We are growing again with the addition of the 20cc Edge 540 profile! The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 20cc version is no different.

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline.

This new 20cc Edge 540 comes with the same great features that Redwing provides with all of our profile planes. It is set up and ready for a DLE 20 to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 20cc Edge is that is has a carbon fiber tube running the FULL length of the fuselage for added strength. Even those not fans of profiles will fall in love with this beauty! Holds the DLE 20 or DLE 20RA perfectly and the 20cc Extra 330 profile has a beautiful red and silver covering job

The 20cc Edge 540 profile comes in 2 new attractive schemes designed by Adam Strong. Get them while they are in stock. The last time we added one of our affordable new lines of profiles we ran out in weeks! Don't let this one slip by.

Buy Replacement Parts
Product Manual

Specifications:

  • Wing span: 1651mm / 65"
  • Wing area: 69.2 sq. dm/ 1072 sq. in
  • All up flying weight: 3100g / 9 lbs
  • Length: 1587.5 mm/ 62.5"
  • Engine: DLE 20 / DLE 20RA
  • Radio: 5 channel
  • Recommended Spinner Size: 2.5"
  • Recommended CG: 5.25" from the leading edge at the root
  • Recommended Prop Size: 17x6
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |

Features:
30cc rc planes30cc rc planes

  • Adjustable push rods
  • Carbon fiber tube running the FULL length of the Fuselage
  • Carbon fiber Wing Tube
  • Fast fly and easy build features, such as : Pre drilled hinges
  • Removable wings
  • Ball linkages

We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 20cc Planes:
East Asia
$45
West Asia
$100
Europe
$75
South America
$95

Please contact us with your location for more specific cost.




DLE 35ra DLE55

20-EDGE-540-Y2

$349.99

Spot On Side Servo Mount Mid

Spot On Side Servo Mount Mid

High Quality 1" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

 

SPO-TRA-010-2

$11.99

MKS 50mm (2") 25T Carbon Arm

MKS 50mm (2") 25T Carbon Arm

 

Custom 1.5" Carbon Servo Arm 
Will work on both X8 and X6 MKS Hub sets

 

MKS-50mm-25T

$8.99