110A ESC with Heat Sink BEC

Contact UsCustomer Reviews

110A ESC with Heat Sink BEC

Market Price: $99.99
Our Price:

$72.99

You Save

27%

Quantity (2)

Availability 2 in stock
Weight 0.25 lbs
SKU BBR-BSC-110A
Manufacturer Blue Bird

110A ESC with Heat Sink BEC, Suitable for 2S-6S Airplane, Glider or Heli

FEATURES:

  • Smooth forward operation
  • Extremely low resistance
  • 32KHz Frequency operation
  • P.O.R Power on reset
  • Easy user programmable features
  • Audible arming signal
  • Microprocessor Controlled
  • B.E.C: 5.0V / 3.0A
  • Programmable low volt cut off for Li-Po
  • Safe start protection
  • Micro size allows for ease of installation
  • Programmable motor rotation

SPECIFICATIONS:

Size:                                     88 x 29 x 17 mm

Weight:                                65.5 g

Max Continuous Current:    110 Amps

Operating Voltage Range:   6 to 15V

On Resistance:                    0.78 mOHM

Max BEC Output:                4 Amps @ 5.0V

     2S~6S Lithium, 6~19 Cell Ni, with Heat Sink

 

DETAILS:

Watt-out-put limit: The output is rated at 388 watts. Under this watt, the speed controller will work normally. When the wattage reaches approximately 410~420, it will automatically shutdown to prevent the speed controller from overloading.

Temperature protection: When the temperature reaches 95 degrees C, the speed controller will slowdown and the output will reduce to 50% and the on board LED will turn on. You must move the throttle stick to idle position to reset the speed controller and will work once you throttle up again.

Warning:

DO NOT install a motor which rating is larger than the speed control’s limit to avoid damage or burn down.

 


: *
: *
: *
 

20cc Yak 54 Profile

20cc Yak 54 Profile 

This airframe is currently out of stock. No current ETA on a new shipment.”

 

 

Description:
What more can we say! A yak 54. A profile. Get ready to have fun! The price can't be beat, and the flying doesn't get any better with this 20cc YAK 54 profile.

Yak 54's are one of the best style aircraft EVER built for aerobatics. Profiles are WELL known for their excellent light wing-loading and performance. Combine the two and this Yak 54 20cc is going to kick some butt!

We are already moving through these fast at this price, so don't wait on pulling the trigger Get yours today!!!!





Videos on this plane:



Buy Replacement Parts
Product Manual



Specifications:

 

 

  • Wing span: 65"
  • Wing area: 800 sq. in.
  • All up flying weight: 6.5-7 lb depending on build style
  • Length: 60"
  • Engine: (Any 20cc-26cc engine) Recommended: DLE 20
  • Radio: 5 channel recommended (4ch possible)
  • Recommended Spinner Size: 2.5"
  • Recommended CG: 25%-30% from the LE at the ROOT
  • Recommended Prop Size: 16x8 sport, 17x8 3d
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
    • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
    • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

 

 

 

 

Features:
30cc rc planes30cc rc planes

 

 

 

 

  • Adjustable push rods
  • Canister ready
  • Fast fly and easy build features, such as : Pre drilled hinges
  • Carbon fiber wing tube
  • Removable wings
  • ALUMINUM Landing Gear (Pictures shown are of personal planes - carbon fiber gear sold separately)
  • **Opto Kill and Mini Tach are NOT included with engine in plane / engine combos**

 

 

 

 

 

 

 

 

 

Shipping Flat Rate $30 in the lower 48 states.

We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 20cc Planes:
East Asia
$45
West Asia
$100
Europe
$75
South America
$95

Please contact us with your location for more specific cost.

 

 

 

 

 

 

 

 

20-YAK54-Yellow

$299.99

XQ 4013 digital 6v

Description:
The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.

The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.

The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.

Specifications:

  • Torque:
    • 166.7 oz/in at 4.8V (12.0 kg/cm)
    • 197.2 oz/in at 6V (12.8 kg/cm)
       
  • Speed:
    • .13 sec at 4.8V
    • .11 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2 oz (59g)
  • Size: 40x20x39mm
     
  • Gear Style: Futaba Arms
  • Modulation: Coreless Digital
  • Gear Type: Titanium
  • Weight: 2oz (59g)
  • Size: 40x20x39mm




Watch this video of the XQ 4013 beating the Hitec 7985mg

Features:

  • Titanium Gears
  • Waterproof
  • Coreless
  • Digital
  • High Torque/High Speed
  • Smooth resolution


Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!

 

X-4013

$42.50

DLE 35RA Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.


Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon


Specifications:

  • Displacement: 34.9 cc (2.13 cu in)
  • Bore: 1.5 in (38.5 mm)
  • Stroke: 1.17 in (35RA mm)
  • Weight: 2.6 lb (42oz)
  • RPM Range: 1,600-8,500
  • Output: 4.1 hp @ 8,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
  • Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
  • Suggested Break-in Prop: 18x6
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
  • Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller

 

 

RedwingRC Pre-Run
DLE 35ra DLE55
 

 

 

DLE-35 RA

$349.99