A YAK 54 profile!!! What more can we say! Get ready to have fun! The price can't be beat, and the flying doesn't get any better with this 20cc YAK 54 profile.
Yak 54's are one of the best style aircraft EVER built for aerobatics. Profiles are WELL known for their excellent light wing-loading and performance. Combine the two and this Yak 54 20cc is going to kick some butt!
Quantities are limited and we are moving through these fast at this price, so don't wait on pulling the trigger Get yours today!!!!
- Wing span: 65"
- Wing area: 1029 sq. in.
- All up flying weight: 6.5-7 lb depending on build style
- Length: 60"
- Engine: (Any 20cc-26cc engine) Recommended: DLE 20
- Radio: 5 channel recommended (4ch possible)
- Recommended Spinner Size: 2.5" or 3"
- Recommended CG: 25%-30% from the LE at the ROOT
- Recommended Prop Size: 16x8 sport, 17x6 3d
- Recommended Throws: adjust to liking as you fly
- Low Rates Settings | High Rate Settings
- Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
- Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
- Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo
Shipping Flat Rate $60 in the lower 48 states.
We DO ship our planes internationally! Please contact us at [email protected] with your location for more specific cost.
Old video but shows Yak 54 early scheme and how it flies!
XQ 4013 digital 6v
The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.
The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.
The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.
- 166.7 oz/in at 4.8V (12.0 kg/cm)
- 197.2 oz/in at 6V (12.8 kg/cm)
- .13 sec at 4.8V
- .11 sec at 6V
- Voltage: 4.8V - 6V
- Weight: 2 oz (59g)
- Size: 40x20x39mm
- Gear Style: Futaba Arms
- Modulation: Coreless Digital
- Gear Type: Titanium
- Weight: 2oz (59g)
- Size: 40x20x39mm
Watch this video of the XQ 4013 beating the Hitec 7985mg
- Titanium Gears
- High Torque/High Speed
- Smooth resolution
Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!
Fiberglass control horn
Replacement control horns for 30cc, 50cc and 100cc planes. Made of light strong fiberglass, these fiberglass control horns fit MOST planes using these style of control horns. Each unit includes 2 single horns and a ball link, so you just need to hook up to your pushrod.
SmartDesign V3 "Trouble Free" Tail Wheel Assembly
This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!
CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc
- Extremely Reliable
- Mechanically Efficient Design
- Simple and Solid Construction
- Fewer parts needed for install
- Ball Bearings
- 20-40cc: $27.00
- 50-70cc: $34.99
- 85-120cc: $44.99
- 150cc-220cc: $54.00
- 20-40cc: 1.2 oz
- 50-70cc: 1.6 oz
- 85-120cc: 2.2 oz
- 150cc-220cc: 2.6 oz
Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.