30cc Edge Replacement Cowl

30cc Edge Replacement Cowl

30cc Edge 540 Replacement Cowls
Our Price:

$39.99

Color Choice
Quantity (3)

Availability 3 in stock
Weight 3.00 lbs
SKU CW-FW-EG-R

Replacement cowls for our 30cc "Strong Design" Edge 540! Following the success of our 20cc Profile Edge 540, we decided it was time for a full fuse version and has been equally well received! 

The 20cc Edge 540 is known for its unsurpassed stability in high alpha and this 30cc version is no different. The RedwingRC 30cc Edge 540 was specifically designed by Adam Strong to take advantage of the scale plane's tendencies, with focus on you expect of a modern day RC plane. Prepare to be amazed!

Click Here to see the 30cc Edge

Just like the plane, these cowls are available in 3 color schemes.

Wheel pants can be added for $19.99 without additional shipping!

: *
: *
: *
 
 

20cc EDGE 540 Profile - RED w/ Star Burst

New Design: 20cc Edge Profile


Description:
Now with Carbon Fiber Reinforcements!

SIDE FORCE GENERATORS INCLUDED!

We are growing again with the addition of the 20cc Edge 540 profile! The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 20cc version is no different.

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline.

This new 20cc Edge 540 comes with the same great features that Redwing provides with all of our profile planes. It is set up and ready for a DLE 20 to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 20cc Edge is that is has a carbon fiber tube running the FULL length of the fuselage for added strength. Even those not fans of profiles will fall in love with this beauty! Holds the DLE 20 or DLE 20RA perfectly and the 20cc Extra 330 profile has a beautiful red and silver covering job


The 20cc Edge 540 profile comes in 2 new attractive schemes designed by Adam Strong. Get them while they are in stock. The last time we added one of our affordable new lines of profiles we ran out in weeks! Don't let this one slip by.



Buy Replacement Parts
Product Manual


Specifications:

  • Wing span: 1651mm / 65"
  • Wing area: 69.2 sq. dm/ 1072 sq. in
  • All up flying weight: 3100g / 9 lbs
  • Length: 1587.5 mm/ 62.5"
  • Engine: DLE 20 / DLE 20RA
  • Radio: 5 channel
  • Recommended Spinner Size: 2.5"
  • Recommended CG: 5.25" from the leading edge at the root
  • Recommended Prop Size: 17x6
    •  
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |




Features:
30cc rc planes30cc rc planes

  • Adjustable push rods
  • Carbon fiber tube running the FULL length of the Fuselage
  • Carbon fiber Wing Tube
  • Fast fly and easy build features, such as : Pre drilled hinges
  • Removable wings
  • Ball linkages


We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 20cc Planes:
East Asia
$45
West Asia
$100
Europe
$75
South America
$95

Please contact us with your location for more specific cost.




DLE 35ra DLE55

20-EDGE-540-R

$249.99

Z-Poxy 15 Minute Epoxy 4 oz. Set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

PAAPT-35

$11.99

RC Gadgetz MXS PNP Phantom Black Scheme

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

RCG-MXS-BLK

$429.00