3D Aerobatic Electric

Description:

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

Product Manual
 

Specifications:*(More Coming Soon)*

• Wing span: 2260mm / 88.97"
• Wing area: 1480 sq. inches
• All up flying weight: 16.4 lbs
• Length: 2065mm / 84.3"
• Cowl
  • Inside diameter: 10.5" (266.7mm)
  • Inside height: 8.75" (222.25mm)
  
  
• Engine: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size:
• Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
• Recommended Prop Size:
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Carbon fiber Rei enforcements:
  • CF stringers in fuse
  • CF stringers in wings
  • CF wing reinforcement tubes
  • CF retention pins in stabs/wings
• Fiberglass stab mounts
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• NOW COME WITH SIDE FORCE GENERATORS!

tml', 'popup', 'width=500,height=500'); return false">

50cc Silence Twister 95inch Balsa Wood ARF 

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

Product Manual
 

Specifications:*(More Coming Soon)*

• Wing span: 2260mm / 88.97"
• Wing area: 1480 sq. inches
• All up flying weight: 16.4 lbs
• Length: 2065mm / 84.3"
• Cowl
  • Inside diameter: 10.5" (266.7mm)
  • Inside height: 8.75" (222.25mm)
  
  
  
  
  
  
  
  
  
  
  
  
  
   
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
• Engine: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size:
• Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
• Recommended Prop Size:
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Carbon fiber Rei enforcements:
  • CF stringers in fuse
  • CF stringers in wings
  • CF wing reinforcement tubes
  • CF retention pins in stabs/wings
• Fiberglass stab mounts
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• NOW COME WITH SIDE FORCE GENERATORS!

tml', 'popup', 'width=500,height=500'); return false">

50cc Sukhoi SU-26 

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

Product Manual
 

Specifications:*(More Coming Soon)*

• Wing span: 2260mm / 88.97"
• Wing area: 1480 sq. inches
• All up flying weight: 16.4 lbs
• Length: 2065mm / 84.3"
• Cowl
  • Inside diameter: 10.5" (266.7mm)
  • Inside height: 8.75" (222.25mm)
  
  
  
  
  
  
  
  
  
  
   
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
• Engine: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size:
• Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
• Recommended Prop Size:
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Carbon fiber Rei enforcements:
  • CF stringers in fuse
  • CF stringers in wings
  • CF wing reinforcement tubes
  • CF retention pins in stabs/wings
• Fiberglass stab mounts
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• NOW COME WITH SIDE FORCE GENERATORS!

tml', 'popup', 'width=500,height=500'); return false">

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

30cc Extra Red

60" Laser 260 (70e) AeroplusRC

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

Volantex RC ASW28 V2 2.6m Plastic Unibody Scale Glider- PNP

FREE Shipping US only--contact us at sales@redwingrc.com to calculate international shipping cost

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

Now this is a unique plane for sure! Upgrade that asphalt runway of yours to a pond, lake or pool! The PBY Catalina seaplane is something you have to experience! It took months of flight testing and designing to produce this amazing aircraft. The Catalina is capable of stable flight at really slow speeds making it perfect for any skill level. Get ready for some really neat details and a large 55 inch wingspan! The Catalina is blast to fly and and landing on on water is a piece of cake.

Key Features:

• Powerful twin 480 size (1100kv) outrunner brushless power system w/ 3-bladed props
• Twin 30A Brushless ESC with Switch-Mode BEC
• Durable and lightweight EPO construction with many surface details
• Excellent Flight Performance
• Detailed Body Structure
• Suitable for Both Intermediate and Experienced Pilots.
• Removable / detachable wing. (4 screws)

Specifications:

SPORT MINI-STICK 600mm Wingspan Balsa Wood Electric 3D Aerobatic Trainer Kit or PNP

STICK-14 V2 55" 1400mm Wingspan Pre-Built ARF Balsa Wood Electric 3D Aerobatic Trainer PNP