A-10 Thunderbolt Green 64mm EDF Jet

Contact UsCustomer Reviews

A-10 Thunderbolt Green 64mm EDF Jet

Our Price:

$189.99

PNP or RTF version
Quantity (2)

Availability 2 in stock
Weight 5.00 lbs
SKU DY36152
Manufacturer Dynam

Description:

RedwingRC Plug-and-Play aircraft! **Now available in RTF!!

A-10 Thunderbolt II also known as 'The Warthog' is an American single-seat, twin-engine, straight-wing jet aircraft designed to provide close air support of ground forces. The A-10 earned its reputation as the 'Tank Buster' with its assortment of lethal air to ground armaments effectively annihilation enemy ground forces and reinforcements. It was the first USAF aircraft designed exclusively for close air support.

The Dynam A-10 has been an awesome flying machine in the Dynam Fleet. Dynam decided to upgrade this bird with servo-less retracts. The A-10 has superb maneuverability even at low speeds and altitude, which is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two 64mm electric ducted fan units. The package comes 90% Ready To Fly, just add your choice of TX/RX and battery. All Servos, motors and other electronics are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is constructed of quality EPO foam and finished to a high standard that represents an excellent replica of the real aircraft.

What is included:

  • PNP--Dynam A-10 airplane, motor, ESC, 4*9g servos
  • RTF--Dynam A-10 airplane, motor, ESC, 4*9g servos, MSR66A Sport Receiver, GAVIN-6A transmitter, 11.1V 2200mAh 25C Li-Po battery and charger

What is required (PNP):

  • 6-Channel or above transmitter
  • 6-Channel receiver
  • 11.1V 2200mAh 25C Li-Po battery and charger

Specifications:

  • Material: EPO Foam
  • Wing Span: 1080mm(42.5in)
  • Flying Weight: 1000g
  • Wing Loading: N/A      
  • Fuselage Length: 995mm(39.2in)
  • Center of Gravity: 70-75mm from the leading edge of the wing at the root
  • Motor: BM2815D-KV3600*2
  • ESC: 40A ESC with 3A BEC*2pcs
  • Propeller: N/A
  • Servo: 9g*4pcs
  • Elevator: Yes
  • Rudder: No
  • Ailerons: Yes
  • Flaps: No
  • Landing Gear: E retract

1 hour assembly time

: *
: *
: *
 

Fourtitude V2 Gas Tank- 16oz

 

The NEW Fortitude V2 gas tanks are here!!!

 

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:




Video:

 

V2 Features:

  • Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.

  • Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.

  • Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.

  • Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.

  • We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

 

 

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

  • Size: 16 oz (473 ml)
    • Length 7 3/8” x Width 2 3/8” x Height 2 3/8” (187.3 x 60 x 60 mm)
  • Weight: 1.5 oz
  • Fittings are part of the cap/ internal tubing
  • Filtered clunk
  • Super light!
  • Crystal clear
  • Seamless
  • Includes: Tank/foam/velcro
  • Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

 

 

 

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

 

 

 

FORS2016

$23.99

GT Power Aircraft Lighting System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

  • Connect 1-3 servos simultaneously
  • Test in 3 different modes
  • Easy to read labels
  • LED lights

GT-Light-SIM

$14.99

SCA-1E 1/10 Scale Subaru BRAT 4WD Scaler, RTR (313mm Wheelbase)

SCA-1E 1/10 Scale Subaru BRAT 4WD Scaler, RTR (313mm Wheelbase)

CIS81068

$274.99