Accessories

Contact UsCustomer Reviews

Products

1 ft TruCote Covering

Heat shrink covering for RC planes

Please contact us for information on if your plane is using Ultracote, or TruCote before ordering if you are unsure

Description:
TruCote covering is a high tech polyester covering that is sensative to heat which makes it easy to apply to your plane. It offers high adhesion, fuel proof/waterproof covering for your plane. Easy to apply using a heat gun and/or iron.

  • Specs:
  • Width: 23.5”
  • Temp to adhesion: Approximately 250 degrees F
  • Shrinkage begins: Approximately 275 degrees F
  • Maximum recommended temp: Approximately 300 degrees F

For instructions on how to apply covering here is a helpful tutorial:

http://www.rc-airplane-advisor.com/heat-shrink-covering.html


Sold in 1 Foot Sections. Please select how many feet you want.

Please put what plane this is for at checkout so that we can match it!

TCC-BLU-1(dark)

$2.00

1-Cell Battery Charge Adapter - Micro JST/JST-PH

Description:

1-Cell Battery Charge Adapter - Micro JST/JST-PH 

The Venom 12 port 1 Cell Battery Charge Adapter allows you to quickly, and easily charge up to six micro batteries at a time off your existing LiPo charger. This handy charge adapter is a must have for anyone who wishes to charge multiple batteries with either Micro JST (MCPX) or JST-PH/Pico connectors. The Venom 12pack features 12 charging ports, self-settable fuses with LED indicator and comes with banana style input leads to make connection to your existing LiPo charger a snap. The Venom 12 port 1 Cell Battery Charge Adapter is perfect for charging batteries from the Parkzone Ultra Micro series, such as, Spitfire, Pole Cat, Corsair, Mosquito, Trojan, Night Vapor, SU-26, P-51, MCX2, MSR, MCPX, and many others. 

 

EX-HRP-VNR0678

$18.99

20 Function Charging Wire to 4mm Bullets

Description:

20 Function Charge Adapter to Male 4mm Bullets - 300mm Wire 

Known around our office as the "giant squid", this charge adapter is an absolute must for your store's service department and for experienced, diversified consumers. Includes the following plugs to address most any charging requirement: Futaba TX, JR TX, Universal RX, EC5, EC3, EC2, XT90, XT60, T-Plug, Tamiya-style Molex, Mini Tamiya-style Molex, EFL/BLH micro, Hubsan-style micro, Glow Plug (for charging Ni-Starters), HC (Traxxas-style), XH-style micro, Molex mini, JST, XL JST (Mini-T style connector), and finally a blank set of wires to add any type of connector we may have forgotten. This is absolutely the finest and most versatile charging squid you or your customers may ever need. 

 

EX-HRP-RCE1660

$34.99

4-Function Charge Adapter to Male 4mm Bullets (XT60, XT90, EC3, EC5)

4-Function Charge Adapter to Male 4mm Bullets (XT60, XT90, EC3, EC5)

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

EX-4func-charge-adapter

$11.99

4MM Custom Mounting Bracket

mount bracket

MC3D-Mount-Bracket111

$5.00

5-Function Charge Adapter to Male 4mm Bullets (XT60, XT90, EC3, EC5 plus Deans)

5-Function Charge Adapter to Male 4mm Bullets (XT60, XT90, EC3, EC5, Deans)

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

EX-5func-charge-adapter

$12.99

5-Function Mini/Micro Charge Adapter to Male 4mm Bullets

Description:

5-Function Mini/Micro Charge Adapter to Male 4mm Bullets

EX-HRP-RCE1625

$9.99

6mm Custom Mounting Bracket

mount bracket

MC3D-Mount-Bracket1

$5.00

8-Function Charge Adapter to Male 4mm Bullets

Description:

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

EX-HRP-RCE1624

$17.99

Battery Holder

mount bracket

MC3D-RW-1450

$8.99

Bavarian Demon 3X 3-Axis Flybarless Gyro System--for Helis

The Bavarian Demon 3X Helicopter Flybarless Gyro System is an elegantly crafted, yet demonically programmed Flybarless Gyro which offers a plethora of features to even the most demonic level of pilots across the world! 3X is a stripped down version of the bigger brother, 3SX, which essentially has removed the rescue features the 3SX utilizes. 3X can be installed in all helicopter models, such as electric, nitro, gasoline, and turbine powered. 3X additionally supports all servo types, which include: analog, digital, brushless, standard pulse-width (1520uS), & narrow band (760uS). Additionally, all swashplate types are supported within the 3SX software, which ensures compatibility with any model found on the market. Features: High Quality MEMS Gyros Aluminum CNC Case USB Connection On Board Specifications: Dimensions: 36x34x14mm Supply Voltage: 4-10V (2s LiPo Compatible; Minimum 5.5V when using Spektrum or JR Satellites) Max Roll & Pitch Rotational Speed: 500 degrees/sec Max Tail Rotational Speed: 650 degrees/sec Tail Servo Output: Digital: 220Hz; Analog: 55Hz; 760-1520uS Head Servo Output: Digital: 110Hz; Analog: 55Hz Maximum Servo Currents: 10A continuous, 12A peak Weight: 18g Cable Length: 90mm Technical Note: The 3SX will not work with ProTek 270SBL, Xpert R1T, & XPert R2T Tail Servos. The "Axon" will be able to utilize these servos.

BD-3X

$199.00

Charging Wire – Deans to Banana Plug

Description:

Short 3 wire to keep tangled wires to a minimum when charging batteries outside of your plane. You can still charge the batteries inside your plane as long as you can get the charger relatively close to the wire or port. Ideal for a multi charger since you won’t have 4 or more super long wires getting tangled and twisted as you try to charge your batteries.

 

EX-CH-DB-3

$3.99