Bleriot XI 1/23 Laser Cut Wooden Static Model Kit

Contact UsCustomer Reviews

Bleriot XI 1/23 Laser Cut Wooden Static Model Kit

Our Price:




Quantity (27)

Availability 27 in stock
Weight 1.50 lbs

Bleriot XI 1/23 Laser Cut Wooden Static Model Kit 

Exquisite static model kit of the famous historical Bleriot XI aircraft. The Blériot XI is a French aircraft of the pioneer era of aviation. The first example was used by Louis Blériot to make the first flight across the English Channel in a heavier-than-air aircraft, on 25 July 1909. This is one of the most famous accomplishments of the pioneer era of aviation, and not only won Blériot a lasting place in history but also assured the future of his aircraft manufacturing business. It was produced in both single and two-seat versions, powered by several different engines, and was widely used for competition and training purposes. Military versions were bought by many countries, continuing in service until after the outbreak of World War I in 1914. Two restored examples – one in the United Kingdom and one in the United States — of original Blériot XI aircraft are thought to be the two oldest flyable aircraft in the world.

FREE Shipping (USA only) contact us at for international shipping. Get yours now for the holidays quantities are limited and will go fast!!! 

  • Premium high quality wood material with clean and smooth surface
  • Accurate laser cut parts for easy construction and scale model design
  • Equipped with comprehensive hardware package and instructions suitable for beginner model builders
  • Comes in a beautiful wooden box to display your exquisite model, special home decoration


  • Scale: 1:23
  • Wingspan: 420mm

NOTE: This is a static model display and can not fly!
Packed in an exquisite wooden box to prevent damage during shipment.

FREE Shipping for USA only. Email to calculate international shipping cost.

: *
: *
: *

Hindenburg (Zeppelin) Static Model Wood Kit

Hindenburg (Zeppelin) Static Model Wood Kit 

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)



20cc Carbon Fiber Landing Gear

Untitled Document

Carbon Fiber Landing Gear for 20cc Planes.
Fits the 20cc Sbach Profile and the 20cc Yak Profile. Strong woven carbon fiber landing gear. Please note, the Carbon fiber landing gear is slightly lower/shorter than the aluminum landing gear but still allows clearance for a typical GAS prop. Longer E props may not clear as easily.

Dimensions (see reference photo):

A= 1"

B= 2 1/4"

C= 6 1/2"

D= 1"

E= 5/8"





*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

Say hello to the F6F, also known as the Hellcat. This plug and play version is made from EPO foam which has proven to be crash resistant. If you are a warbird enthusiast, then the Hellcat is a must!

Superb maneuverability at slow speeds even at low speeds and designed for large loops, knife edges, and inverted flights! Just like all the planes from Dynam RC, the Dynam F4F Hellcat comes with a pre-painted finish and is an excellent representation of the real thing. The pre-installed retracts are a super great feature that really add to the scale appearance of the plane. With the PNP Hellcat you can experience the NEW retract system- now the landing gears rotate and tuck into the wings.

Bonus Feature: The Dynam Hellcat F4F is flap ready. The wings have the cutouts for the servos and hinges. You will need to supply the servos and servo reverser (if your radio does not have this feature)

All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying.

Build time is around 45- 60 min from box to air. Expect flight time to be from 8-12 minutes, but all depends how fast you fly.


Key Features:

  • Retractable landing gear allow for smooth takeoffs and landings and scale flying
  • Powerful Detrum BM3170 brushless motor (500kv)
  • 40A Brushless ESC with Switch-Mode BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Steerable tail wheel.



Wingspan: 50in (1270mm)
Overall Length: 41.5in (1054mm)
Flying Weight: 1600g (1600g) w/Battery
Motor Size: BM 3170 500kv (installed)
Propeller: Dynam 13 x 7 x 3 (3 bladed prop)
Radio / Transmitter 5 Channel (NOT INCLUDED)
Receiver 5+ Channel (not included)
Servos: 4 servos total (2 x 9g & 2 x 17g) - Installed
Speed Control : 40Amp (dectrum) - Installed
Battery: 14.8C LiPo 2200 mah (Not Included)
Flight Times

8 to 12 Min

Assembly Time

45 to 60 min







Future Model Green EPP MX2 Cowl

Green EPP MX2 Replacement Cowl