Bob Smith Industries Maxi-Cure Exra Thick CA

Bob Smith Industries Maxi-Cure Exra Thick CA

Our Price:

$4.99

Size
Quantity (10)

Availability 10 in stock
Weight 0.31 lbs
SKU BSI-CA-135
Untitled Document

Description:

Bob Smith Industries CA Glue

Maxi-Cure™ Super Glue, CA

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.

Directions:

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.

 

Works Best On:

  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Rubber
  • Laminating
  • Reinforcing

Works Good On:

  • Balsa Wood
  • Water-Resistant

 

Click to Download Safety Data Sheet

: *
: *
: *
 
 

20cc EDGE 540 Profile - Yellow w/ Star Burst

New Design: 20cc Edge Profile


Description:
Now with Carbon Fiber Reinforcements!

SIDE FORCE GENERATORS INCLUDED!

We are growing again with the addition of the 20cc Edge 540 profile! The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 20cc version is no different.

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline.

This new 20cc Edge 540 comes with the same great features that Redwing provides with all of our profile planes. It is set up and ready for a DLE 20 to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 20cc Edge is that is has a carbon fiber tube running the FULL length of the fuselage for added strength. Even those not fans of profiles will fall in love with this beauty! Holds the DLE 20 or DLE 20RA perfectly and the 20cc Extra 330 profile has a beautiful red and silver covering job


The 20cc Edge 540 profile comes in 2 new attractive schemes designed by Adam Strong. Get them while they are in stock. The last time we added one of our affordable new lines of profiles we ran out in weeks! Don't let this one slip by.



Buy Replacement Parts
Product Manual


Specifications:

  • Wing span: 1651mm / 65"
  • Wing area: 69.2 sq. dm/ 1072 sq. in
  • All up flying weight: 3100g / 9 lbs
  • Length: 1587.5 mm/ 62.5"
  • Engine: DLE 20 / DLE 20RA
  • Radio: 5 channel
  • Recommended Spinner Size: 2.5"
  • Recommended CG: 5.25" from the leading edge at the root
  • Recommended Prop Size: 17x6
    •  
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |




Features:
30cc rc planes30cc rc planes

  • Adjustable push rods
  • Carbon fiber tube running the FULL length of the Fuselage
  • Carbon fiber Wing Tube
  • Fast fly and easy build features, such as : Pre drilled hinges
  • Removable wings
  • Ball linkages


We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 20cc Planes:
East Asia
$45
West Asia
$100
Europe
$75
South America
$95

Please contact us with your location for more specific cost.




DLE 35ra DLE55

20-EDGE-540-Y2

$249.99

Bob Smith Industries Insta-Set

Untitled Document

Description:

Bob Smith Industries Insta-Set

Insta-Set™

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

 

Directions:

After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

 

Works Best On:

BSI-AC-151

$5.99

Spot On 1.5" Servo Arm

Untitled Document

High Quality 1.5" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.

SPO-SA-56b90992ed6d8

$10.00