CDI Remote Kill Switch

CDI Remote Kill Switch

Market Price: $19.95
Our Price:

$15.95

You Save

20%

Quantity (8)

Availability 8 in stock
Weight 0.19 lbs
SKU SW-CDI-Kill-4112

Description: CDI Remote Kill Switch
This Remote CDI Kill Switch for Gas RC planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled providing complete isolation between the ignition system and the radio system so there is NO interference. Simply plug in the JR lead labeled To Receiver into a spare receiver channel and the other leads to the battery and ignition to give the pilot the ability to safely kill the engine anytime on the ground or in the air.  This is a must have safety device for any gas powered plane (most fields require a kill switch for gas planes).

Features:

  • Integrated CDI remote kill switch, allows pilot to kill engine anytime on the ground or in the air
  • Fiber Optic coupled input/output to the CDI provide complete isolation between the receiver power and CDI power to prevent high-frequency interference
  • Dual LED lights indicate the input and output power status.
  • Applies to lithium, nickel metal hydride, nickel cadmium, and A123 batteries powered directly
  • Can be used for other purposes such as: control pull smoke detectors, retractable landing gear, ignite fireworks, drop parachute, etc…

Technical Parameters:

  • Voltage: 4.8-13V
  • Current: 0-3A
  • Weight: 11g
  • Size: 30 x 24 x 9mm
: *
: *
: *
 
 

LiFe Batteries 2S (XT or Deans)

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 1450mah - 2.8oz,
    • 2100mah - 4oz,
    • 3100mah Life - 5.5oz
  • Size:
    • 1450mah- 15mm x 34mm x 87mm,
    • 2100mah- 12mm x 50mm x 106mm,
    • 3000mah- 130mm x 45mm x 15m
  • Voltage: 6.6Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 2 cells (2s)
  • 14gauge Wire
  • Connectors: Two Options!
    • T Connector (T connector that fit a standard Dean)
    • XT-60 Connector. Choose Below
  • Also a balancing lead


Be sure to select the XT connector if purchasing for use with our Power Box PRO's.
 

  • 1450mah - $15.99
  • 2100mah - $25.99
  • 3000mah - $39.99
     

LiFe

$15.99

Servo Extensions 22AWG and 20AWG

Description:
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
 

  • Soft flexible silicone casing
  • Heavy duty 22awg
  • Universal - XQ Power/Hitec/Power HD/JR/more...
  • Reliable! We've NEVER gotten a pair returned

    Prices
    • 2" 1 pair - $2.50
    • 2" 2 pair - $4.50
    • 2" 3 pair - $6.99
       
    • 3" 1 pair - $3.50
    • 3" 2 pair - $6.50
    • 3" 3 pair - $8.99
       
    • 6" 1 pair - $3.99
    • 6" 2 pair - $6.99
    • 6" 3 pair - $9.99
       
    • 8" 1 pair - $3.99
    • 8" 2 pair - $6.99
    • 8" 3 pair - $9.99
       
    • 10" 1 pair - $3.99
    • 10" 2 pair - $6.99
    • 10" 3 pair - $9.99
       
    • 12" 1 pair - $4.99
    • 12" 2 pair - $8.99
    • 12" 3 pair - $12.99
       
    • 14" 1 pair - $4.99
    • 14" 2 pair - $8.99
    • 14" 3 pair - $12.99
       
    • 16" 1 pair - $4.99
    • 16" 2 pair - $8.99
    • 16" 3 pair - $12.99
       
    • 18" 1 pair - $6.99
    • 18" 2 pair - $10.99
    • 18" 3 pair - $13.99

    • 24" 1 pair - $7.99
    • 24" 2 pair - $12.99
    • 24" 3 pair - $15.99
       
    • 28" 1 pair - $7.99
    • 28" 2 pair - $12.99
    • 28" 3 pair - $15.99
       
    • 32" 1 pair - $7.99
    • 32" 2 pair - $12.99
    • 32" 3 pair - $15.99
       
    • 36" 1 pair - $8.99
    • 36" 2 pair - $14.99
    • 36" 3 pair - $17.99

    • 44" 1 pair - $8.99
    • 44" 2 pair - $14.99
    • 44" 3 pair - $17.99
       
    • 48" 1 pair - $8.99
    • 48" 2 pair - $14.99
    • 48" 3 pair - $17.99
       

EX

$2.50

Servo Safety Clips

Description:
10 pack of servo safety clips. Made to retain your servo wires to keep them from slipping off during flight.

A must have to to ensure your servo connectors stay securely connected.

Packs of 10:

EX-clip

$4.95