DE HAVILLAND TIGER MOTH SCALE 1:3,8 (Giant Wingspan 93" 2360mm)

DE HAVILLAND TIGER MOTH SCALE 1:3,8 (Giant Wingspan 93" 2360mm)

Our Price:

$549.99

 

FREE SHIPPING

Quantity (2)

Availability 2 in stock
Weight 11.46 lbs
SKU VP-Tiger Moth

DE HAVILLAND TIGER MOTH SCALE 1:3,8 (wingspan 93" 2360mm)

Historical  Background:

The de Havilland DH.82 Tiger Moth is a 1930s British biplane designed by Geoffrey de Havilland and built by the de Havilland

Aircraft Company. It was operated by the Royal Air Force (RAF) and many other operators as a primary trainer aircraft.

In addition to the type's principal use for ab-initio training, the Second World War saw RAF Tiger Moths operating in other

capacities, including maritime surveillance and defensive anti-invasion preparations; some aircraft were even outfitted to

function as armed light bombers.

Specification:
Wingspan:2360mm
Length: 1850mm
Weight: 8.5kg

Recommend Equipment:
Servo: ≥8KG
Aileron servo : KST ds1509mg
Engine: 2T30cc--50cc
4T40cc--60cc
 

Product List:

1* Un-assembled Balsa Tiger Moth KIT:

Plywood sheet pack*1 1:1 installation drawing*1

Batten sets Operation instruction*1

Fiber cowl*1 Fiber servo arms*3

Metal landing gear set*1 Tail wheel set*1

Main wheel* 1 pair 4mm steel tube set*1

Blister part*4 Metal parts plate*2

Metal fitting bag*1 φ0.8mm steel wire*20M

φ1mm steel wire*10M

 

KIT FEATURES

1:3.8 Scale detail and scheme-based on DH82 Tiger Moth.

Extremely lightweight, state-of-the-art all-wood construction

Fiberglass cowl

Complete Hardware Pack.

Stainless Steel Flying Wires and Terminations.

Sprung and Damped Telescopic Undercarriage.

Full-scale simulation metallicstructure.

Extensive Clear Drawings and Instructions.

Only Adhesives and Coverings are required to complete the airframe

 
Note: 
KIT version does not included any electronic device.
Glue is not included.
 
 

FREE Shipping US only***

 

 

 

 


Unboxing



: *
: *
: *
 
 

Brass Collet with Tension Screw (10 pcs)

Brass Collet with Tension Screw

VP-Brass-Collet

$17.99

CNC Steel Tension Regulator (10 pcs)

CNC Steel Tension Regulator (10 pcs) 

VP-Tension-Regulator

$26.99

DLE 35RA Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty


Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.


Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon


Specifications:

  • Displacement: 34.9 cc (2.13 cu in)
  • Bore: 1.5 in (38.5 mm)
  • Stroke: 1.17 in (35RA mm)
  • Weight: 2.6 lb (42oz)
  • RPM Range: 1,600-8,500
  • Output: 4.1 hp @ 8,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
  • Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
  • Suggested Break-in Prop: 18x6
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
  • Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller


RedwingRC Pre-Run
DLE 35ra DLE55
 

DLE-35 RA

$349.99

Redwing RC Aluminum Servo Circle Arms

Description: DID YOU GET COOL ALUMINUM OR CARBON FIBER ARMS WITH YOUR KIT, BUT DON'T WANT TO USE THE PLASTIC CIRCLE ARMS THAT COME WITH YOUR SERVOS? FINALLY! THE SOLUTION IS HERE!!

Now made to fit Hitec, OR XQpower/Futaba/PowerHD

Made to line up with Redwing, Goldwing, and MOST other ARFS that include servo arms. The holes pre drilled are threaded for a 2mm bolt, so that you do NOT have to use a nut on the bottom. Just a little loc tite on the servo arm threads, and tighten. YOUR DONE!

Not sure if it's the best thing since sliced bread, but it's close!

1 circle $4.99
5 = $19.95
10= $38.90
 

RW-Circle-Arm

$4.99

MPI Aluminum Servo Arms

Description:

MPI servo arms are made with heavy duty anodized aluminum offset servo arms designed for Hitec, Futaba, XQ Power, Power HD Servos. These MPI servo arms are drilled and tapped for 4-40 with a starter hole for another hole closer in if necessary. The clamping arm on these MPI arms ensures a safe and secure installation, minimizing any risk of slop or the arms coming loose. 

We recommend the following sizes of MPI arms for the planes below:

30cc planes typically use 1.25" for ailerons and elevators, and 3" for rudder.

50cc planes typically use 1.25-1.5" for ailerons and elevators, and 3.5" - 4" for rudder.

100cc planes typically use 1.5" for ailerons and elevators, and 4" for rudder.



1.25", 1.5", 3", 4" Sizes
Available for HiTEC, XQ Power, PowerHD, Futaba Servos

MPI Arms feature:
Bracing for Extra Strength
Lightweight and Strong
Extra Security Screw to Keep Arms on
Pre Dented to Allow for Optional Holes


Futuba style arms fit: Power HD, XQ-Power, and Futaba
Hitec fit: Hitec


**Now introducing new size! 2-inch lengths for HiTec and Futaba!

MPI Servo Arm Pricing:
  • 1.25" arm $8.90
  • 1.5" arm $10.25
  • 2" arm $11
  • 3" rudder arm $15.25
  • 4" rudder arm $16.95

KA -

$11.00