Dynam Meteor V3 70mm EDF Jet

Contact UsCustomer Reviews

Dynam Meteor V3 70mm EDF Jet

Our Price:


PNP or SRTF version
Quantity (4)

Availability 4 in stock
Weight 5.00 lbs
SKU DY51629
Manufacturer Dynam

Dynam Meteor V3 70mm EDF Jet-- RedwingRC Plug-and-Play aircraft! **Now available in RTF!!

The Dynam Meteor is a High Speed 70mm EDF Sport Jet. This new V3  Meteor jet is made of strong EPO material, with a new paint scheme and includes an upgraded 12 fan EDF motor. All servos, 70mm Fan and the ESC are pre-installed in the model. Designed for high-speed flying with a powerful brushless electric ducted-fan, the fan unit is well constructed for high-performance flying. The Meteor EDF sport jet is set to be one of the fastest EPO 70mm EDF-Airplanes available!

What is included:

  • PNP--Meteor 70mm EDFJet, motor, ESC, 5*9g servos
  • SRTF--Meteor 70mm EDFJet, motor, ESC, 5*9g servos, MSR66A Sport Receiver, GAVIN-6A transmitter, 4S 14.8V, 2600mAh, 30C Li-Po battery and charger

Smart-Ready-to-Fly (SRTF) includes a Detrum mini 6-channel 2.4GHz 6-axis gyro integrated receiver and a Detrum 6-channel 6A transmitter . It provides four different flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance) and can be programmed from the matching transmitter. Just charge the included battery and with minimum assembly, it is ready to fly.

What is required (PNP):

  • 6-Channel or above transmitter
  • 6-Channel receiver
  • 4S 14.8V, 2600mAh, 30C Li-Po battery and charger


  • Material: EPO Foam
  • Wing Span: 910mm(35.8in)
  • Flying Weight: 1100g
  • Wing Loading: 52.8g/dm²
  • Fuselage Length: 1100mm(41.1in)
  • Center of Gravity: 105 - 110mm from the leading edge at the wing root
  • Motor: Detrum BM2827A-KV2600 
  • ESC: TC Skylord 60A ESC
  • Propeller: 12 blades EDF
  • Servo: 5x 9g
  • Elevator: Yes
  • Rudder: Yes
  • Ailerons: Yes
  • Flaps: No
  • Landing Gear: E retract

1 hour assembly time


: *
: *
: *


Fourtitude Dual Tank Mounting Trays 20oz

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.



Black Marlin MX RTR Boat




Hubsan X4 Jet FPV Racing Quad

X4 Jet