Dynam Sonic 185 Glider 1850mm (72") Wingspan - PNP

Dynam Sonic 185 Glider 1850mm (72") Wingspan - PNP

Market Price: $179.99
Our Price:


You Save


Quantity (4)

Availability 4 in stock
Weight 5.00 lbs
SKU DY36039-Sonic

Dynam Sonic 185 Glider 1850mm (72") Wingspan - PNP

The Sonic 185 EP glider combines it all. The model is made of  a special foam material-EPO, that is more crash resistant and reinforced where needed with carbonfibre rods. The model is controlled over 3 axis that makes it very manouvrable. The overall flying characteristics of the Sonic 185 are forgiving and extremely stable. Very good gliding performance and even aerobatics are possible. The installed brushless motor in combination with the folding propeller guarantees extreme climbing rates and power all time.

What is included:

Dynam Sonic 185 airplaneB, motor, ESC, 4*9g servos

What is required:

6 Channel or above transmitter

6 Channel Receiver

11.1V 1800mAh 20C Li-Po battery and charger

1 hour assembly time


Material: EPO Foam

Wing Span: 1850mm(72.8in)

Flying Weight: 980g

Wing Loading: N/A      

Fuselage Length: 1090mm(42.9in)

Center of Gravity: 55 - 65mm from the leading edge of the wing at the root

Motor: Detrum BM3512A-KV1200

ESC: TC Skylord 30A ESC

Propeller: 2-Blade folding Prop

Servo: 4x 9g

Elevator: Yes

Rudder: Yes

Ailerons: Yes

Flaps: No

Landing Gear: N/A


: *
: *
: *

Micro Deans Connectors

5 Pairs of Deans Style Connectors

Nylon T-connectors. These are VERY similar to Dean's style T connectors, and are fully compatible with Deans connectors.
Pack includes 5 male and 5 female connectors.

These connectors are made from Nylon, making them very tough and difficult to melt, even with the worst of soldering skills.


  • Durable nylon connectors
  • Compatible with Deans large connectors
  • Easy to solder
  • Positive/negative can only connect one way ensuring proper polarity




Zap-A-Gap CA+ Glue 4oz 2oz and 1oz






















Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.


Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges


Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.


Click to Download Safety Data Sheet



Power HD 1370A - Micro Servo - 0.6 kg (8.3 oz/in), .010/sec - 3.7g

Power HD 1370A - Micro Servo - 0.6 kg (8.3 oz/in), .010/sec - 3.7g

The Power-HD DSM44 digital servo is a micro servo with digital control electronics for increased performance. Just like the Power-HD DSP33 ,the DSM44 is also very light and ranks as the secont lightest servo at RedwingRC- weighing only slightly over 6g!!! In the DSM44, the output shaft is supported by a ball bearing for decreased friction, and another great feature is that most of the gears are metal for increased durability! The lead is terminated with a Futaba-compatible standard “JR”-style connector. Servo horns and associated hardware are included.

It is important to note that stalling or back-driving this servo can strip its gears.


  • Torque:
    16.66 oz/in at 4.8V (1.2 kg/cm)
    22.21 oz/in at 6V (1.6 kg/cm)
  • Speed:
    .09 sec at 4.8V
    .07 sec at 6V
  • Voltage: 4.8v to 6v
  • Weight: .24oz (6.75 g)
  • Size: .68 x .87 x 1.06in (22 x 8.7 x 27mm
  • Digital
  • Lead Length: 160 mm
  • Storage Temperature: -20℃~60℃
  • Operating Temperature: -10℃~50℃
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes