Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft

Contact UsCustomer Reviews

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft

Market Price: $159.99
Our Price:

$127.99

You Save

20%

Optional Versions
Quantity (1)

Availability 1 in stock
Weight 5.00 lbs
SKU DW-S2501

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft Kit 

Watch the video showing the quality of the laser cut parts and easy construction. Then enjoy a superb flight demonstration!

Features:

  • Accurate laser cut parts for easy construction
  • Premium balsa and plywood materials
  • Authentic functional landing gear 
  • Molded plastic cowl and windscreen
  • Equipped with comprehensive hardware pack
  • 1000mm wingspan for good stability
  • Suitable for beginners to improve flying skills
  • Enjoy the eaasy assembly process and fun stable flight 

Specification: 

Wingspan: 1000mm 
Fuselage Length: 900mm
Flying Weight: 800g 

Suggested Power System
Electric Motor: 2212-2216 900-1200KV
ESC: 30A 
Servo: 9g x 4pcs  (See all RedwingRC Servos)
Propeller: 9-11 inch 
BATT: 3S 2200-2800mAh (see all RedwingRC batteries/chargers)
Radio: more than 4CH  
Charger: Pulse Balance Charger (PLC100)
 
Note: 
KIT version does not included any electronic device.
 
 
Optional Kit versions Include (make selection from dropdown above):
  • S2501=S25 EP EX330 Balsa KIT only
  • S2501B=S25 EP EX330 Balsa KIT + Film (2M Blue+2M Red)
  • S2504=S25 EP EX330 Balsa KIT+Motor+ESC(20A ESC+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4pcs)
  • S2504B=S25 EP EX330 Balsa KIT+Motor+ESC+Servo+4M Film

$20 Flat Shipping US only--contact us at [email protected] to calculate international shipping cost

 


: *
: *
: *
 

Bob Smith Industries Slow-Cure Epoxy

Untitled Document

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

BSI-PX-205-

$11.99

Piper Cub J3 1200mm (47.3") Wingspan Balsa Wood LaserCut Aircraft

Piper Cub J3 1200mm (47.3") Wingspan Balsa Wood LaserCut Aircraft

FREE Shipping US only***(contact us at [email protected] to calculate shipping cost outside the US)

DW-S0801

$127.99

Zap CA Glue (Thin) 1oz (Pink Label)

Zap CA Glue (Thin) 1oz Pink Bottle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

PT-08

$8.99