Deperdussin Monocoque (D.M.) 1.0M (39.4") Wingspan Balsa Wood LaserCut Early Racing Aircraft

Deperdussin Monocoque (D.M.) 1.0M (39.4") Wingspan Balsa Wood LaserCut Early Racing Aircraft

Our Price:

$159.99

 

FREE SHIPPING

Optional Versions
Quantity (12)

Availability 12 in stock
Weight 11.46 lbs
SKU DW-S2201

Deperdussin Monocoque (D.M.) 1.0M (39.4") Wingspan Balsa Wood LaserCut Early Racing Aircraft Kit 

Historical  Background:

The Deperdussin Monocoque was an early racing aircraft built in 1912 by the Aeroplanes Deperdussin, a French aircraft manufacturer started in 1911 and recognized as the Société Pour L'Aviation et ses Dérivés (SPAD) in 1913. 
It is so named because of the method of construction of its fuselage. The aircraft is noted for winning the Gordon Bennett Trophy in 1912 and 1913, and for rasing the world speed record for aircraft to 130mph (210km/h)

Features:
- Cool streamlined apperance design
- 1000mm mid-wing monoplane for flexible flight
- Solid and lightweight framework
- Eco friendly wood material with clean and smooth surface
- Molded plastic cowl, engine hood, authestic landing gear
- Comprehensive hardware pack
- 4CH electric powered airplane model
- Comes in a lovely wooden box to display your beautiful aircraft model
- valuable for both flying and static display
- Perfect gift to your friends

Specification: 
Wingspan: 1000mm 
Fuselage Length: 915mm
Flying Weight: 0.8-0.9kg 
Version: KIT
 
Recommended Parts (Not Included):
Motor: 2216 1200KV 
Propeller: 9-10 inch
ESC: 20-30A, 
Servo: 9g *4 (See all RedwingRC Servos)
Battery: 3S 1500-2200mAh (see all RedwingRC batteries/chargers)
Charger: Pulse Balance Charger (PLC100, PLC400D)
Radio: 2.4G >4CH (Jumper T16)
Covering Film: 

 
Note: 
KIT version does not included any electronic device.
Glue is not included.
 
Package Included:

S2201=S22 EP D.M KIT (1.0M) 
S2201B=KIT+4M Flim (2M Green+2M White)

FREE Shipping US only***

 

 

 

 

: *
: *
: *
 
 

Demon 3 Axis Gyro System

 

 

 

 

 

 

 

 

 

 

 

 

Demon 3-AXIS GYRO
 

This is a ground-breaking 3-axis stabilization system. The gyro CORTEX is high-quality, reliable, and universal. Whether you have a Parkflyer, a 3D Acro model, or turbine jet, this gyro will fit your aircraft. The cortex has 100% reliable sensors and the latest soft-ware algorithms. Everything is in a remarkably small CNC-milled aluminum housing. With this gyro system you will notice a difference- flying around, landing, and strong or gusty winds are no longer a problem.

IMMEDIATELY 'READY TO RUN'. SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT. 

The Cortex does not require any PC or additional software settings - unless it is desired. You don’t want to wait and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier. 

COMPATIBLE. UNIVERSAL. STRONG. THE VERSATILITY LEAVES NOTHING TO BE DESIRED.

The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed online at any time.

SCOPE OF DELIVERY & GADGETS. GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES. 

Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".

 

Click Here for Demon Gyro Manual

 

Video Playlist:

 

Includes:
·  bavarian DEMON CORTEX incl. adhesive pads
·  Connection cable harness
·  Jumper for programming

*Gyro come in two options so be sure to select the correct one:

  • Without USB Cable
  • With USB Cable


BD-CORTEX

$249.00

Zap Zip Kicker 2oz Pump Spray

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

PAAPT-715

$6.99

Booma RC Wallaby Switch II with Active Dual Battery Redundancy and Voltage Monitoring

Description:

Booma RC

If you want a switch that offers complete dual battery balancing and redundancy with an ultra-small footprint for your scale model then look no further. The new Booma RC intelligent redundant battery balancing switch is the answer.

This switch works with any single or dual battery system. Works with battery chemistry and voltage range from 2.5v to 28v. It comes with a Pin Flag and Ultra Bright Blue LED which can be mounted discretely on your scale model. The Pin Flag controls the internally mounted switch and battery redundancy circuit. The result - beautiful scale appearance with dual battery redundancy peace of mind.

This new balancing technology offers zero voltage drop battery balancing and redundancy which means it can handle huge loads without generating heat. This also means your receiver and servos get all the power unlike conventional battery balancing which loses precious power as heat.

Package Includes:

  • 1 x Pin Flag Switch with mounting hardware.
  • 1 x Ultra Bright Blue LED with mounting hardware.
  • 1 x Dual Battery Balancing power switch circuit.
  • 2 x sets of Input and Output JR connectors.


Specs:

  • Ultra low foot print for the best scale looks.
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD. Battery voltage range can be from 2.5volts to 28 volts.
  • Capable of handling input voltages up to 28volts.
  •  Minimal external footprint - All you see on the outside of your model is a 3mm Pin Flag socket and (if required) an ultra-high bright Blue LED. The Pin Flag controls the internal power switch and dual battery redundancy.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
  •  Maximum Battery Power Balancing - In a dual battery system HS1 draws current proportionally from both batteries while moving both batteries to a complete load balance situation. This means you get the maximum capacity out of both batteries all the time.
  • 2 x 25 amp independent circuits. HS1 is 2 x 25amp circuits into a high power matching battery redundancy circuit. HS1 actually uses 4 x 50 amp rated FET circuits for battery power matching. We passively rate HS1 at 25amps per circuit.

BRC-163-JR

$52.99