Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT

Contact UsCustomer Reviews

Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT

Our Price:

$159.99

Optional Versions
Quantity

OUT OF STOCK


Availability No items available
Weight 3.10 lbs
SKU DW-S2101

Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT

Historical Background:
The Fi-156 was created as a reconnaissance, liaison and air-ambulance aircraft in 1936 by Dr. Gerhard Fieseler. This unique airplane’s

legs, struts and windows stuck out everywhere, and its landing gear hung down, looking very much like a long-legged, big-winged bird,

so it was given the nickname “Storch” (the German word for stork).

Virtually nothing about a Storch is streamlined. It was a purpose-built, short takeoff and landing (STOL) aircraft which, with a bit of headwind,

could become airborne in less than 200 feet, and when its low landing speed was combined with a strong headwind, the Storch appeared to

land vertically, and sometimes looked like it was flying backwards.

Specifications:
Brand Name: Dancing Wings Hobby
Item Name: Fieseler Fi 156 Storch
Material: Balsa wood
Wingspan: 1600mm
Length: 1000mm
Flying Weight: 1.7-1.9kg
Version: KIT

Recommended Parts (Not Included):
Motor: 2814-2820 KV800-1000
Propeller: 10-12 Inch propeller
ESC: 40A
Servo: 9g *8, (See all RedwingRC Servos)
Battery: 4S 14.8V 2200mAh-2800mAh, (see all RedwingRC batteries/chargers)
Charger: Pulse Balance Charger (PLC100, PLC400D) Special offer PLC100 $50 with Kit purchase
Remote Control System: 2.4G 6CH, (Jumper T16) Special offer T16 $125 with Kit  purchase
Covering Film: 

Note:
KIT version does not included any electronic device.
Glue is not included.

English Manual, Click Here

Package Includes:
1x Dancing Wings Hobby Fieseler Fi 156 Storch 1600mm Balsa wood RC Airplane KIT








 


: *
: *
: *
 

XQ 4013 digital 6v

Description:
The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.

The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.

The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.

Specifications:

  • Torque:
    • 166.7 oz/in at 4.8V (12.0 kg/cm)
    • 197.2 oz/in at 6V (12.8 kg/cm)
       
  • Speed:
    • .13 sec at 4.8V
    • .11 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2 oz (59g)
  • Size: 40x20x39mm
     
  • Gear Style: Futaba Arms
  • Modulation: Coreless Digital
  • Gear Type: Titanium
  • Weight: 2oz (59g)
  • Size: 40x20x39mm




Watch this video of the XQ 4013 beating the Hitec 7985mg

Features:

  • Titanium Gears
  • Waterproof
  • Coreless
  • Digital
  • High Torque/High Speed
  • Smooth resolution


Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!

 

X-4013

$42.50

Bob Smith Industries Maxi-Cure Exra Thick CA

Untitled Document

Description:

Bob Smith Industries CA Glue

Maxi-Cure™ Super Glue, CA

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.

Directions:

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.

 

Works Best On:

  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Rubber
  • Laminating
  • Reinforcing

Works Good On:

  • Balsa Wood
  • Water-Resistant

 

Click to Download Safety Data Sheet

BSI-CA-56b908cabf5a5

$4.99

Bob Smith Industries Insta-Set

Untitled Document

Description:

Bob Smith Industries Insta-Set

Insta-Set™

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

 

Directions:

After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

 

Works Best On:

BSI-AC-151

$5.99