Hansa-Brandenburg W.29 1.4M (55") Balsa Electric Seaplane

Contact UsCustomer Reviews

Hansa-Brandenburg W.29 1.4M (55") Balsa Electric Seaplane

Our Price:

$161.99

Kit Combos
Radio Combo
Quantity (8)

Availability 8 in stock
Weight 2.50 lbs
SKU DW-S2601
Hansa-Brandenburg W.29 1.4M (55") Balsa Electric Seaplane 

Redwing RC is proud to offer this unique looking Balsa Wood Electric Seaplane Kit. With its inverted tail and unique look it will capture attention of on lookers as it climbs of the water. Made from light balsa and hardwoods with all parts beautifully laser cut with extreme accurate detail makes this precise model. This Kit is easy to assemble and comes complete with 1:1 wing plans. The Large Wing Surface and 1400mm low wingspan help provide very stable flight for this electric seaplane. See our price saving Combo deals!

Specifications:

  • Wingspan : 1400mm (55”)
  • Fuselage : 960mm (38")
  • Take-off Weight : 1.5kg (3.3lbs)

Recommended Equipment:

  • Suggested Motor: 2817 950KV 
  • Suggested ESC: 40A- 4S
  • Suggested Servo: 9g*4
  • Suggested RX: 4 CH
  • Suggested Prop:10-12inch
  • Suggested BATT: 4S 2200-2800mAh

S2601=S26 EP Hansa-Brandenburg W.29 KIT
S2604=S26 EP Hansa-Brandenburg W.29 KIT +Motor+ESC+Servo
S26B1=Film Pack For S26 EP Hansa-Brandenburg W.29 (2M Silver, 2M Yellow, 1M Black)
S2604B=S26 EP Hansa-Brandenburg W.29 Kit +Motor+ESC+Servo+Film pack

 


Keith Trammel's Build Series



: *
: *
: *
 

Power Board - PRO SERIES - Black (4106)

Power Board - PRO SERIES - Black (4106)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

 

These new versions offer SEVERAL new features:
1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
3) TOUCH button programming to select your warning voltage
4) Wires to your RX are PRE-installed
5) Enclosed lightweight and strong plastic housing
6) XT-60 Connectors

 

 

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

 

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.





Watch this video for an overview of the different versions


View this video for a full explanation on how to use these power boards




Features:


Black Power Board (4106)

  • Dual battery redundancy for safer flying
  • LCD display which shows real time info of your in and out voltages
  • Built in regulator that supplies a clean 5v to your receiver
  • Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
  • 8 channels in, 16 channels out (+ ignition)
  • Electronically isolated for interference free flying
  • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
  • Ability to use High voltage servos while providing a clean 5v to your RX
  • Battery balancing (draws extremely evenly from your dual battery set up)
  • Short Circuit protection (in the unlikely event of a short it will protect from battery drain)

    (input voltage MUST be between 6-13v. A 4S Life would be ideal)



Specs:

Black Power Board (4106)

  • Input Voltage: 6-13v
  • Working load: 0A to 30A
  • Weight: 4.5 oz.
  • Dimensions: 4.5"x2.5"x5/8"
  • Working Temperature: -20c to -85c



Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.

PB-4106

$135.00

ManiaX Power LiPo 3S 2300mAh 11.1V eXtreme Series 70C

ManiaX LiPo 3S 2300mAh 11.1V eXtreme Series 70C 

 

MX-3S-2300-70C

$35.99

Savox SW-1210SG Waterproof, HV, Brushless, Digital Servo 0.13 sec / 444.4oz @ 7.4V

Savox SW-1210SG Waterproof, HV, Brushless, Digital Servo 0.13 sec / 444.4oz @ 7.4V  

 

 

 

 

 

 

 

Savox SW-2210SG Waterproof, HV, Brushless, Digital Servo 0.11 sec / 500oz @ 7.4V 

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider - the Savox SA-1231.

The Savox SA-1231 servos are a more powerful, high torque, coreless digital servo that can fit every control surface for giant scale aircrafts - while still being super lightweight, 20% lighter than its kind! Sounds great - right?! These servos combine leading edge technology with super high 12 bit resolution and super strong unique steel gears.

The coreless motor ensures high speed, incredible efficiency and LOW POWER CONSUPTION - so no "hungry hungry servo" sucking away your battery life - also allowing cooler and smoother operating temperatures. So chill out!

You can trust that these SA-1231 servos are a perfect match for your large scale model because they are especially designed to handle the stresses of large scale flying. Whether is be jet, 3D or scale - these servos take on the stress so you don't have to!

All in all - these servos are a great choice for your RC plane. Order yours now!

 

Specifications:

  • Torque:
    • 389 oz/in at 4.8V
    • 444.4 oz/in at 6V
       
  • Speed:
    • .18 sec at 4.8V
    • .14 sec at 6V
       
  • Voltage: 4.8V to 6V
  • Weight: 2.78 oz (79g)
  • Size: 1.58 x .79 x 1.77 in (40.3 x 20.2 x 45 mm)
     
  • Gear Type - Unique Steel
  • Case - Full Aluminum
  • Bearing - dual ball bearings
  • Frequency - 250-333hz
  • Output Shaft - 25 Tooth Spline

 

 

 

GET YOURS TODAY!

 

 

 

SAV-SW1210SG

$83.99