Lemon RX DSMX Compatible 7-Channel with Stabilizer Gyro (Top Pin) w/ compatible Satellite (DSM2 backward compatible)

Lemon RX DSMX Compatible 7-Channel with Stabilizer Gyro (Top Pin) w/ compatible Satellite (DSM2 backward compatible)

Our Price:


Quantity (4)

Availability 4 in stock
Weight 0.25 lbs
SKU LM-0004






Lemon Rx DSMX Compatible 7-Channel Stabilizer (Top Pin) + Lemon DSMX Compatible Satellite (DSM2 backward compatible)



Stabilizer with DSMX Compatible 7-Channel Full Range Receiver

Number of Channels:



DSMX Compatible (Also DSM2 backward Compatible)


2.4 GHz


25(L) x 35(W) x 7(H)  mm


8.3 gram without satellite

Voltage Range:

3.45 - 7.2V



  • 7-Channel receiver when stabilizer is disabled. (AUX2 located at bind position)
  • Supports Flaperon by switching J6 to on position while setting the Spektrum transmitter wing type as Flaperon
  • Gear channel for remote stabilizer on/off
  • Remote master gain on-the-fly adjustment on AUX3.

  Using the stabilizer as 7-Channel Receiver

  • Turn off J1 to J6.
  • Follows normal binding procedure by inserting bind plug to the bind location and enable binding on transmitter.
  • Bind location will become the 7th channel. Use ESC with BEC on throttle channel for supplying power to servo.

Understanding the Lemon Rx stabilizer

Diagram of unit

Install location of Lemon Rx stabilizer

Direction of servo movment with changes in direction when stabilizer is enabled


Setup Instruction

  1. Glue your stabilizer alone the C.G. Flipping your gyro for the required installation is also OK.

  2. (No Flaperon for Fixed Wing/ Delta / V-Tail) Disable any mixing on you Spektrum transmitter and choose the correct wing type by setting J4 and J5.
    1. (Flaperon for Fixed Wing) Disable any mixing and enable Flaperon on Spektrum transmitter. J4, J5 and J6 at on position.

  3. The stabilizer already has a build-in Spektrum compatible receiver and will work without satellite. Insert bind plug to bind location and power on the unit. LED indicator will flash quickly. Turn on your transmitter to bind mode for binding. If binding is successful the LED indication will stop flashing and become solid.

  4. Sub-trim and set stick directions with Spektrum transmitter on all channels as necessary. Upon trimming, toggle Gear switch twice in 1 second allows stick centering detection which is required for optimizing the stabilization. Gear switch is used to switch between manual or stabilization control Green + red LED indication means no stabilization while solid green means stabilization is enabled. If Aux3 is available on your transmitter, remote master gain tuning for all 3 channels will become available. However, during setup AUX3 should be in its center position.

  5. Adjust the 3 potentiometers to 50% and check the gain direction. Ensure your Gear is set to enable gyro with gain = 1 on AUX3 (if available). Rotate the plane in all 3 axis and adjust J1 to J3 as necessary for gain direction changing. Ensure the servo moves the wing as shown in the earlier diagram for proper correction. Adjust the individual gain as necessary.

  6. Ready to start flying! Remember to check Gear, AUX3 and proper gyro correction for all 3 axis just before you flying your plane!




: *
: *
: *

Redwing LEDs for Side Force Generators

Powerful LED array for Side Force Generators.

These very bright LED arrays are perfect for night flying and can be easily installed into your SFGs with no trouble. The SFGs are made to fit SOME of our planes, but with a little modification you can make these SFG fit nearly any wing with a flat outer edge.

The optimum voltage range for this item is 6.6v to 7.4v.

** These LEDs work perfectly with our Side Force Generators! Great for night flying for hours of fun!!!**

**You will need 4 LEDs if you plan to use them with the SFGs- this will provide the optimal amount of light for safe flying. Two LEDS illuminate the top of your plane while the other two illumanate the bottom.**

CLICK HERE for Side Force Generators!



50cc Yak 55 Replacement Canopy

50cc Yak 55 Replacement Canopy (Clear)



FUTABAS3305 Standard Hi-Torque Metal Gear Servo .2sec/124oz @ 6V





























































































































































Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.


  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions