MPX Dual Servo Harness 12" Male 8"-24" Staggered Female (2 Channels 1 Plug) 20 AWG

MPX Dual Servo Harness 12" Male 8"-24" Staggered Female (2 Channels 1 Plug) 20 AWG

Market Price: $20.99
Our Price:


You Save


Quantity (36)

Availability 36 in stock
Weight 0.20 lbs
SKU MPX-Dual-12/8-24

MPX High Amp Dual Servo Harness with 12" Male/8"-24" Staggered Female 20 AWG 100 Strand wire

Running 4 aileron servo's or flaps and ailerons on each wing panel?  Tired of marking and making 4 connections all the time?  Redwing RC offers the perfect solution!

This high quality accessory provides a faster and easier field assembly with a much cleaner install.  Simply attach your servo extensions to the female MPX plug extension and plug the JR connectors of the male MPX extension into the receiver.  This version has a flanged male MPX connector suitable for permanently mounting to your fuselage providing a simple one plug interface for each wing and with the staggered servo leads is great for most 35%-37% wing panels..  Requires 2 sets, one for each wing panel.

1 Set Includes:  1 male MPX with flange and (2) 12” 20 AWG wires with JR connectors and 1 female MPX with an 8” and 24" 20 AWG wire with female universal pin connectors for servos.

: *
: *
: *

Miracle Fuel Dot - Aluminum - Gas

These Miracle fuel dots are GREAT looking and function just as well. They are made of machined aluminum, and have a neoprene O-ring for a tight fuel proof fit. They include all the hardware you need and work with all standard size tygon tubing.



Servo Safety Clips

10 pack of servo safety clips. Made to retain your servo wires to keep them from slipping off during flight.

A must have to to ensure your servo connectors stay securely connected.

Packs of 10:



Booma RC Pin Flag w/ Hidden Dual Battery Redundancy Switch


Booma RC

If you want a switch that offers complete dual battery balancing and redundancy with an ultra-small footprint for your scale model then look no further. The new Booma RC intelligent redundant battery balancing switch is the answer.

This switch works with any single or dual battery system. Works with battery chemistry and voltage range from 2.5v to 28v. It comes with a Pin Flag and Ultra Bright Blue LED which can be mounted discretely on your scale model. The Pin Flag controls the internally mounted switch and battery redundancy circuit. The result - beautiful scale appearance with dual battery redundancy peace of mind.

This new balancing technology offers zero voltage drop battery balancing and redundancy which means it can handle huge loads without generating heat. This also means your receiver and servos get all the power unlike conventional battery balancing which loses precious power as heat.

Package Includes:

  • 1 x Pin Flag Switch with mounting hardware.
  • 1 x Ultra Bright Blue LED with mounting hardware.
  • 1 x Dual Battery Balancing power switch circuit.
  • 2 x sets of Input and Output JR connectors.


  • Ultra low foot print for the best scale looks.
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD. Battery voltage range can be from 2.5volts to 28 volts.
  • Capable of handling input voltages up to 28volts.
  •  Minimal external footprint - All you see on the outside of your model is a 3mm Pin Flag socket and (if required) an ultra-high bright Blue LED. The Pin Flag controls the internal power switch and dual battery redundancy.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
  •  Maximum Battery Power Balancing - In a dual battery system HS1 draws current proportionally from both batteries while moving both batteries to a complete load balance situation. This means you get the maximum capacity out of both batteries all the time.
  • 2 x 25 amp independent circuits. HS1 is 2 x 25amp circuits into a high power matching battery redundancy circuit. HS1 actually uses 4 x 50 amp rated FET circuits for battery power matching. We passively rate HS1 at 25amps per circuit.