Power HD R30 HV Servo - 30Kg/cm (416.62 oz/in), 0.16sec

Power HD R30 HV Servo - 30Kg/cm (416.62 oz/in), 0.16sec

Market Price: $59.99
Our Price:

$53.00

You Save

12%

Quantity

OUT OF STOCK


Availability No items available
Weight 0.35 lbs
SKU HD-R30

Power HD R30 Servo - 30Kg/cm (416.62 oz/in), 0.16sec - High Voltage

One of the advantages of coreless motors is their ability to change direction very quickly, due to the low rotational mass of their armatures. The motor spins titanium and aluminum gears that are supported by bronze bushings and dual ball bearings on the output. The main body of the servo is machined from aluminum and houses the motor, potentiometer and digital decoder / ESC board. 

 

 

 

 


Specifications:

  • Modulation: Digital
  • Gear Type: Titanium and Steel
  • Torque: 7.4v - 416.62oz-in (30 kg-cm), 6.0v - 333.3oz-in (24 kg-cm)
  • Speed: 7.4v - 0.16 sec, 6.0v - 0.18 sec
  • Operating Voltage: 6.0-8.4 V
  • Weight: 70.0 g (2.46 oz)
  • Bearing Type: Ball Beating x2
  • Motor Type: Coreless Motor
  • Operating Temperature: -20C-60C
  • Working Frequency: 1520µs / 333hz
  • Size: 40.7x 20.5 x 38.5 mm (1.60 x 0.80 x 1.51 in)
: *
: *
: *
 
 

RCEXL Optical Kill Switch

Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference



Features:

  • Includes a remote mountable bright LED to indicate when the ignition is armed.
  • Fiber Optic coupled input/output.
  • Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
  • Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
  • Low to 3Volt 3amp output.
  • Low Voltage Drop-Less than 150mv.
  • 100% Surface Mount Technology.
  • Heavy Gauge Wires,universal connectors.
  • Small and light weight –only 0.3 OZ!(8g)
  • Reverse Bettery input protection.
  • Shut down the transmitter power or receiver to cut off automatically when kill engine


RCEXL-Opto kill

$15.95

RCexl Mini Tachometer

Description:
You can use this RCexl mini tachometer to hook up directly to the ignition on the JC 28cc, or DLE engines to be able to view your RPM's at a glance. You can mount this mini-tach in your cockpit, or other visible area, and it runs off the battery power already supplied to your ignition. This is the newest RCexl (RCxl RCexcel) Version



Specifications:

  • Input Voltage between 3.5 and 8.4 volts
  • Current Consumption 25-60mA
  • Size: 41mmx17mmx12mm
  • Weight: .3oz



Features:

  • Indicates up to 30,000 RPM
  • Has and ULTRA-Bright LED so it can be easily read in daylight
  • Standard Futaba plug
  • Includes a Y Harness


RCexl-Mini-Tach

$15.99

Booma RC Pin Flag w/ Hidden Dual Battery Redundancy Switch

Description:

Booma RC

If you want a switch that offers complete dual battery balancing and redundancy with an ultra-small footprint for your scale model then look no further. The new Booma RC intelligent redundant battery balancing switch is the answer.

This switch works with any single or dual battery system. Works with battery chemistry and voltage range from 2.5v to 28v. It comes with a Pin Flag and Ultra Bright Blue LED which can be mounted discretely on your scale model. The Pin Flag controls the internally mounted switch and battery redundancy circuit. The result - beautiful scale appearance with dual battery redundancy peace of mind.

This new balancing technology offers zero voltage drop battery balancing and redundancy which means it can handle huge loads without generating heat. This also means your receiver and servos get all the power unlike conventional battery balancing which loses precious power as heat.

Package Includes:

  • 1 x Pin Flag Switch with mounting hardware.
  • 1 x Ultra Bright Blue LED with mounting hardware.
  • 1 x Dual Battery Balancing power switch circuit.
  • 2 x sets of Input and Output JR connectors.


Specs:

  • Ultra low foot print for the best scale looks.
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD. Battery voltage range can be from 2.5volts to 28 volts.
  • Capable of handling input voltages up to 28volts.
  •  Minimal external footprint - All you see on the outside of your model is a 3mm Pin Flag socket and (if required) an ultra-high bright Blue LED. The Pin Flag controls the internal power switch and dual battery redundancy.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
  •  Maximum Battery Power Balancing - In a dual battery system HS1 draws current proportionally from both batteries while moving both batteries to a complete load balance situation. This means you get the maximum capacity out of both batteries all the time.
  • 2 x 25 amp independent circuits. HS1 is 2 x 25amp circuits into a high power matching battery redundancy circuit. HS1 actually uses 4 x 50 amp rated FET circuits for battery power matching. We passively rate HS1 at 25amps per circuit.

BRC-346A-DBSW-JR

$48.00