Regulator-Switch (6V Regulated Dual Battery Redundancy switch with Fail-Safe Tech)

Contact UsCustomer Reviews

Regulator-Switch (6V Regulated Dual Battery Redundancy switch with Fail-Safe Tech)

Our Price:

$78.85

Switch Configuration
Input Connectors
Output Connectors
Quantity (4)

Availability 4 in stock
Weight 0.28 lbs
SKU BRC-773-Reg-Switch
Manufacturer Booma RC

Regulatori-Switch (6 V Regulated Dual Battery Redundancy switch with Fail-Safe Tech) 

The AR Reg Switch is the next level in regulator and switch design, small sleek and powerful. The Reg-Switch will take any battery type and regulate it down to 6.0v for your receiver and servos. *Also available in 5 volt and 7.2volt version by special order (email us at: [email protected])

The lightweight sleek black aluminum case is designed as an integrated heatsink while also being small, compact and lightweight allowing the Reg-Switch the ability to maintain high operational loads in tough conditions. 

Built with our proven dual battery redundancy technology the AR Reg-Switch can be used with either a single or dual battery setup and is designed to power any receiver or power distribution system on the market.

With its built-in failsafe technology, you have peace of mind knowing that the AR Reg-Switch has you covered.

The AR Reg-switch with its slim, lightweight aluminum case, can be mounted inside your model, creating a sleek finished look for all model types.

The AR Reg-Switch is based upon the proven Smart BUS RRS and Smooth Flite Power stage design. The Reg-Switch is now a modular design that allows easy mixing and matching of input and output cables to suit any and all your model needs.

* Works with all battery chemistries, NiCD, Nimh, Lion, LiFe, LiPo or PB.
* Regulates to 6 volts.  (Available in 5.0 volt and 7.2volt version by special order, just email us at: [email protected]).
* Dual Battery Backer Redundancy.
* Fail safe switching design.
* Supplied with a universal Switch connector for multiple Switching Options: Pin Flag, Magnetic or Remote switching.
* Single or Dual Battery input Ready.
* Multiple easy-to-change Input options; JR or Deans/Ultra.
* Multiple easy-to-change output options; JR, Ultra, XT60 EC3 Etc.
* Supplied with a bright blue remote LED for mounting anywhere in the model.
* 4 volt to 12 volt capable for those new 12 volt servos.
* Burst to 20A (30 seconds) for high G maneuvers.
* Continuous 10A operation with heatsink aluminum casing (Using LiFe 2S batteries).

: *
: *
: *
 

BLUE POWER LED FOR SMARTBUS SMOOTHFLITE AND MULTI SWITCH

BLUE POWER LED FOR SMARTBUS SMOOTHFLITE AND MULTI SWITCH

Booma RC

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.



BRC-855

$6.99

30cc EDGE 540 Yellow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

 

Check out this awesome plane in action!


 

Specifications:

  • Wing span:
    • With tips:78.5
    • Without tips: 75"
  • Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
  • All up flying weight: 10.5 to 12 lbs.
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG: 5" to 5.75" from the front half of wing tube
  • Recommended Prop Size: 18x8 to 20x8
  • Recommended Throws: adjust to liking as you fly LOW MED HIGH

    AIL 1.75”/30% 2.75”/40% 4”/60%

    ELE 2.5”/30% 3.25”/ 40% 4”/55%

    RUD 2.5”/20% 3”/ 30% 4.25”/40%





Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Canister Tunnel built in
  • Painted matching spinner (available separately)
  • Includes a black plastic spinner
  • Optional integrated air deflector for venting hot cowl air
  • Fast Fly Feature: Pre-installed hinges (except rudder)
  • Carbon Fiber Retention Pins in stabs
  • Fiberglass tabs on stabs (stronger than wood)
  • Carbon Fiber Wing Tube
  • Metal Servo arm set
  • Removable Side Force Generators / Racing Wing tips

 


 

 

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

 

30-EDGE-Y

$428.99

Tech Aero IBEC

Tech Aero IBEC

TA-BEC

$41.95

MULTIPLEX (MPX) Dual Servo Harness 12" Male 12" Female (2 Channels 1 Plug) 20 AWG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:
Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

MPX-Dual-12/12

$15.99