SCORPION VANGUARD S3-80 SUPER STOCK KIT SET

Contact UsCustomer Reviews

SCORPION VANGUARD S3-80 SUPER STOCK KIT SET

Our Price:

$209.99

Quantity (5)

Availability 5 in stock
Weight 1.50 lbs
SKU ESC-0018
Manufacturer Scorpion

SCORPION VANGUARD S3-80 SUPER STOCK KIT SET

Specification:

  •  Cont./ Burst Current, *A | 80/400A
  •  Motor Type Supported | Sensored and Sensorless Brushless Motor
  •  All level competitions, 10th & 12th Scale and off road
  •  Motor Limit | >= 8.5T
  •  Resistance | 0.00155Ohm*2
  •  Voltage Input | 1s-3s LiPo
  •  BEC | 6V@3A DC-DC
  •  Footprint | 30,6 mm (W) x 35,6 mm (L)
  •  Size (w/o FAN) | 35.8 x 35.6 x 21.8 mm
  •  Weight | 40g
  •  FAN | 6V@0.2A
  •  External Programming Port Output | 2
  •  * Burst current rating according to MOS FET specification

Features:

  • Build with military specification component.
  • Wide input voltage range 3-14V (1S-3S Lipo)
  • Sensored and Sensorless brushless motors (BLDC)
  • Drive down to 8.5T motor (Scorpion Vanguard S3-80)
  • High current, up to 80A continues current, with current protection. (Scorpion Vanguard S3-80 Super    Stock Kit Set)
  • Factory driver suggested setting
  • Profession PC program
  • Logging, store up to 8,000 records of system parameters
  • Aluminum heat sink
  • Build-in temperature sensor with adjustable temperature protection.
  • True DC-DC 3 A/6V BEC for servo and receiver
  • Multiple protection
  • Adjustable Voltage control and protection(cutoff, motor stop) with LiPo AutoDetect mode.
  • Motor over temperature protection (for Scorpion RS-3420 motor)
  • 2 x hall sensor connectors, each can be used for PC connection either.
  • Flexible adjustment
  • Wide range of settings for different purpose and race course

 

SCORPIONVANGUARD S3-SERIES - USER GUIDE V4.1

Scorpion Vanguard S3-80 Super Stock Kit Set

Weight including packaging

188g

 

: *
: *
: *
 

Demon 3 Axis Gyro System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Demon 3-AXIS GYRO
 

This is a ground-breaking 3-axis stabilization system. The gyro CORTEX is high-quality, reliable, and universal. Whether you have a Parkflyer, a 3D Acro model, or turbine jet, this gyro will fit your aircraft. The cortex has 100% reliable sensors and the latest soft-ware algorithms. Everything is in a remarkably small CNC-milled aluminum housing. With this gyro system you will notice a difference- flying around, landing, and strong or gusty winds are no longer a problem.

IMMEDIATELY 'READY TO RUN'. SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT. 

The Cortex does not require any PC or additional software settings - unless it is desired. You don’t want to wait and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier. 

COMPATIBLE. UNIVERSAL. STRONG. THE VERSATILITY LEAVES NOTHING TO BE DESIRED.

The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed online at any time.

SCOPE OF DELIVERY & GADGETS. GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES. 

Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".

 

Click Here for Demon Gyro Manual

 

Video Playlist:

 

Includes:
·  bavarian DEMON CORTEX incl. adhesive pads
·  Connection cable harness
·  Jumper for programming

*Gyro come in two options so be sure to select the correct one:

  • Without USB Cable
  • With USB Cable

 

 

 

BD-CORTEX

$249.00

NEW

SmartBus RRS ARXL - multi-protocal

SmartBus RRS ARXL - multi-protocal

BRC-732

$349.99

EC3 to 4mm Banana Plug Battery Charge Cable

EC3 to 4mm Banana Plug Battery Charge Cable

Description:

Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

EX-EC3-Charge cable

$5.99