BLS-37A, HV-DIGITAL, HIGH TORQUE, HIGH SPEED, BRUSHLESS +Servo Arm

Contact UsCustomer Reviews

BLS-37A, HV-DIGITAL, HIGH TORQUE, HIGH SPEED, BRUSHLESS +Servo Arm

Our Price:

$93.99

Quantity (8)

Availability 8 in stock
Weight 0.51 lbs
SKU BBR-BLS-37A
Manufacturer Blue Bird

BLS-37A, HV-DIGITAL, HIGH TORQUE, HIGH SPEED, BRUSHLESS

APPLICATION / SUITABLE
Priority for 3D Airplane, Large Jet & 1/5、1/8th Buggy, Truggy, Crawler, Monster & Helicopter.  (EP / Gas / Nitro)

 

 SPECIFICATIONS

Torque At 6.0V 31.3 kg-cm / 434.8 oz-in
Torque At 7.4V 37.8 kg-cm / 525.1 oz-in
Torque At 8.4V 43.2 kg-cm / 600.1 oz-in
Speed At 6.0V 0.10 sec / 60°
Speed At 7.4V 0.08 sec / 60°
Speed At 8.4V 0.07 sec / 60°

 

PROTECTION MECHANISM

Soft Start Protection A soft start to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage Protection Lower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor Protection Stall in 5 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C, drive the protection mode and down 75 degrees C
return to normal mode.

 

POWER SUPPLY

Operating Voltage Range  4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe)

 STANDARD FULL ALUMINUM SERVO

Control System Digital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency:333Hz / Neutral:1520us
Dead Band Width 0.001ms ( Default:1us)

 

MECHANICAL SPECIFICATIONS

Ball Bearing Dual
Gear Titanium Alloy Gears
Motor Premium Taiwan Brushless Motor
Horn / Gear Spline 25 Teeth ( Same as F-Type )

 

PHYSICAL SPECIFICATIONS

Dimension (mm) 40.5 x 20 x 39 mm / 1.59 x 0.79 x 1.54 in
Weight (gram) 78.5 ± 1 grams / 2.77 oz

 

: *
: *
: *
 

Lemon RX DSMX Compatible Satellite

 

 

 

 

 

 

Description:

Lemon Rx DSMX Comptaible Satellite

 

Type: DSMX Compatible Satellite Full Range Receiver
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 1.7(L) x 1.5(W) x 1(H)  cm
Weight: 2.5 gram
Voltage Range 3.3V from Receiver

 

Note:

 

 

 

 

 

  • 1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.

  • 2) This is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.

  • 3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spketrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).

LM-0008

$12.99

BMS-A921+ HV MINI, DIGITAL, CORELESS (New Faster and more Torque w/ Soft Start Protection)

BMS-A921+ HV MINI, DIGITAL, CORELESS (New Faster and more Torque w/ Soft Start Protection)

BBR-BMS-A921+

$67.99

AR T-Switch (Telemetry Switch)

AR T-Switch (Telemetry Switch)

Booma RC Regulatori-Switch (6 V Regulated Dual Battery Redundancy switch with Fail-Safe Tech) 

Booma RC

If you want a switch that offers complete dual battery balancing and redundancy with an ultra-small footprint for your scale model then look no further. The new Booma RC intelligent redundant battery balancing switch is the answer.

This switch works with any single or dual battery system. Works with battery chemistry and voltage range from 2.5v to 28v. It comes with a Pin Flag and Ultra Bright Blue LED which can be mounted discretely on your scale model. The Pin Flag controls the internally mounted switch and battery redundancy circuit. The result - beautiful scale appearance with dual battery redundancy peace of mind.

This new balancing technology offers zero voltage drop battery balancing and redundancy which means it can handle huge loads without generating heat. This also means your receiver and servos get all the power unlike conventional battery balancing which loses precious power as heat.

Package Includes:

  • 1 x Pin Flag Switch with mounting hardware.
  • 1 x Ultra Bright Blue LED with mounting hardware.
  • 1 x Dual Battery Balancing power switch circuit.
  • 2 x sets of Input and Output JR connectors.

 

 

Specs:

 

 

  • Ultra low foot print for the best scale looks.
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD. Battery voltage range can be from 2.5volts to 28 volts.
  • Capable of handling input voltages up to 28volts.
  •  Minimal external footprint - All you see on the outside of your model is a 3mm Pin Flag socket and (if required) an ultra-high bright Blue LED. The Pin Flag controls the internal power switch and dual battery redundancy.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
  •  Maximum Battery Power Balancing - In a dual battery system HS1 draws current proportionally from both batteries while moving both batteries to a complete load balance situation. This means you get the maximum capacity out of both batteries all the time.
  • 2 x 25 amp independent circuits. HS1 is 2 x 25amp circuits into a high power matching battery redundancy circuit. HS1 actually uses 4 x 50 amp rated FET circuits for battery power matching. We passively rate HS1 at 25amps per circuit.

BRC-887-TSwitch

$99.99