Engine and Fuel Accessories

Description:

New Throttle Arm!

This extension provides extra room between throttle arm and choke arm.  Remove the existing throttle arms from the carb and slide this extension arm in place and tighten the set screws.

Specifications:

• Height- 16mm
• Includes two set screws
• Efficient design

Rcexl Walbro Style Weighted Felt Fuel Clunk

Fuel clunks are a must for aerobatic flying. It insures that fuel is always flowing to the engine because the fuel line will follow gravity inside your tank. Without one, you increase the chance that your plane may stall when flying inverted or performing different maneuvers. Installing a fuel clunk is simple to install and an investment that any serious pilot should make.

13x16mm

.4 oz

Description:

Threaded Push Rod for Throttle

Threaded on one end. Works great with our Quick Connect Ball Joint. Can be used as throttle linkage.

23CC-30CC Accelerator/Resonance Tube, 26CC Rear Exit Canister Muffler

Miracle Clamshell Round Fuel Dot

Miracle Clamshell Fuel Dot

Description:

Say hello to the Miracle Clamshell Fuel Dot- Filling your plane just got even easier.

This new designed fuel dot is very easy yo use. It has a fuel inlet and two fuel outlets. Just open the clamshell- in doing so the outlet to the engine will automatically close so you can insert the fuel nipple and fuel your plane like always. When you are done, just remove fuel nipple and close the clamshell- the outlet to the engine will open automatically.

Pick between Red, Blue, and Black.

Clamshell Dimensions:

• Front plate: 1 3/8"
• Body: 3/4"

+

The NEW Fortitude V2 gas tanks are here!!!

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

Video:

V2 Features:

• Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.


• Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.


• Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.


• Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.


• We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

• Size: 16 oz (473 ml)
  • Length 7 3/8” x Width 2 3/8” x Height 2 3/8” (187.3 x 60 x 60 mm)
• Weight: 1.5 oz
• Fittings are part of the cap/ internal tubing
• Filtered clunk
• Super light!
• Crystal clear
• Seamless
• Includes: Tank/foam/velcro
• Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

The NEW Fortitude V2 gas tanks are here!!!

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

Video:

V2 Features:

• Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.


• Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.


• Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.


• Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.


• We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

• Size: 32 oz (946 ml)
  • Length 8 7/8” x Width 3” x Height 3” ( 225.5 x 76 x 76 mm)
• Weight: 2 oz
• Fittings are part of the cap/ internal tubing
• Filtered clunk
• Super light!
• Crystal clear
• Seamless
• Includes: Tank/foam/velcro
• Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

Miracle Shock-Absorbing Engine Mount

Description:

This shock absorbing engine mount is perfect for engines 20cc a smaller. Simply install the mount into the firewall and then attach the engine to the mounts. The channel allows you to adjust the distance between the firewall and the engine. Sturdy aluminum design provides strength while the rubber washers dampen vibrations.

This engine mount works best with 20cc or less and will absorb the shock/ vibrations during engine running. CNC mount with viton washer. The miracle "shock-absorbing" engine mount can prevent damage to electronic parts and the airplane structure.

Specifications (Approx):

• Length: 97 mm
• Width: 14 mm
• Viton washers
• Includes hardware to attach mount to firewall








 
•  
•  
•  
•  
•  

High Quality Dual Fuel Dot (Magnet Style)

Available in Black or Silver.

Material: Aluminum

Uses very strong Rare-Earth magnet to hold the dot in place.

Simple and effective. The Double Dot allows you to add fuel and smoke in a single compact unit.

DA Stock Mufflers

DA mufflers feature all aluminium CNC construction and a large baffled main canister. These design features make them a very durable in-cowl muffler. Included with DA mufflers are two  pressure fittings for smoke and two plugs for the inlets if you do not run smoke.

Enjoy your DA mufflers Today!

Specs:

• DA 35
• DA 50
• DA 60
• DA 70
• DA 100
• DA 120
• DA 150
• DA 170
• DA 200

These mufflers are made for DA Engines. Click Here!

16oz Smoke Tank
[email protected]

*Fourtitude has had to amend their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Take the guesswork and worry out of properly setting up a smoke system in your aircraft with these easy to use 4titude smoke tanks!

We've been receiving a few requests for the smoke tanks and as usual Redwing RC has LISTENED! Introducing the Fourtitude Smoke Tanks available now at Redwing RC! You're welcome :-)

Video:

Features:

• Crystal Clear allowing quick visual checks of any possible pollutants in your smoke tank.
• Lightest weight commercially available R/C smoke tank on the market. Many cases less than half the weight of the older roto molded “standard” tanks.
• Aerospace Mil spec sealant used in assembly to assure the tank will hold up to many high G loaded flights!
• Incredibly resilient and truly seamless tank body with a threaded on closure
• No rubber stopper to crack, leak, or split your tank apart.
• Detailed installation instructions.
  
  Fourtitude R/C RTU Smoke tanks include: A high quality double sided hook and loop mounting strap, precut to shape foam mounting pad, and Fourtitude R/C blue fuel line to plumb your aircraft. Everything you need to get smoking up the sky ASAP!
  
  These crystal clear plastic tanks are square shaped which makes mounting into your aircraft very simple. Every tank is QC pressure leak tested.

  16oz Fourtitude SMOKE tank

20oz Smoke Tank
[email protected]

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Take the guesswork and worry out of properly setting up a smoke system in your aircraft with these easy to use 4titude smoke tanks!

We've been receiving a few requests for the smoke tanks and as usual Redwing RC has LISTENED! Introducing the Fourtitude Smoke Tanks available now at Redwing RC! You're welcome :-)

Video:

Features:

• Crystal Clear allowing quick visual checks of any possible pollutants in your smoke tank.
• Lightest weight commercially available R/C smoke tank on the market. Many cases less than half the weight of the older roto molded “standard” tanks.
• Aerospace Mil spec sealant used in assembly to assure the tank will hold up to many high G loaded flights!
• Incredibly resilient and truly seamless tank body with a threaded on closure
• No rubber stopper to crack, leak, or split your tank apart.
• Detailed installation instructions.
  
  Fourtitude R/C RTU Smoke tanks include: A high quality double sided hook and loop mounting strap, precut to shape foam mounting pad, and Fourtitude R/C blue fuel line to plumb your aircraft. Everything you need to get smoking up the sky ASAP!
  
  These crystal clear plastic tanks are square shaped which makes mounting into your aircraft very simple. Every tank is QC pressure leak tested.

  20oz Fourtitude SMOKE tank