Servos

Contact UsCustomer Reviews

Servos

Servos

To see all servos carried by Redwing RC select Accessories/Radios-Servos-Parts.

Products

HiTec HS-5087MH HV Digital MG Micro Servo, .13sec/60oz @ 7.4v

 

HiTec HS-5087MH HV Digital MG Micro Servo, .13sec/60oz @ 7.4v 

 

HRC-35087S

$39.99

Digital LED Servo Tester

Digital LED Servo Tester

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

  • Connect 1-3 servos simultaneously
  • Test in 3 different modes
  • Easy to read labels
  • LED lights

QX-20423-Digital-Servo-tester

$12.99

Power HD 1370A - Micro Servo - 0.6 kg (8.3 oz/in), .010/sec - 3.7g

Power HD 1370A - Micro Servo - 0.6 kg (8.3 oz/in), .010/sec - 3.7g

The Power-HD DSM44 digital servo is a micro servo with digital control electronics for increased performance. Just like the Power-HD DSP33 ,the DSM44 is also very light and ranks as the secont lightest servo at RedwingRC- weighing only slightly over 6g!!! In the DSM44, the output shaft is supported by a ball bearing for decreased friction, and another great feature is that most of the gears are metal for increased durability! The lead is terminated with a Futaba-compatible standard “JR”-style connector. Servo horns and associated hardware are included.

It is important to note that stalling or back-driving this servo can strip its gears.



Specifications:

  • Torque:
    16.66 oz/in at 4.8V (1.2 kg/cm)
    22.21 oz/in at 6V (1.6 kg/cm)
     
  • Speed:
    .09 sec at 4.8V
    .07 sec at 6V
     
  • Voltage: 4.8v to 6v
  • Weight: .24oz (6.75 g)
  • Size: .68 x .87 x 1.06in (22 x 8.7 x 27mm
     
  • Digital
  • Lead Length: 160 mm
  • Storage Temperature: -20℃~60℃
  • Operating Temperature: -10℃~50℃
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes

HD-1370A

$5.99

Power HD 1440A - Micro Servo - 0.8 kg (11.11 oz/in), .09/sec - 4.4g

Power HD 1440A - Micro Servo - 0.8 kg (11.11 oz/in), .09/sec - 4.4g

The Power-HD DSM44 digital servo is a micro servo with digital control electronics for increased performance. Just like the Power-HD DSP33 ,the DSM44 is also very light and ranks as the secont lightest servo at RedwingRC- weighing only slightly over 6g!!! In the DSM44, the output shaft is supported by a ball bearing for decreased friction, and another great feature is that most of the gears are metal for increased durability! The lead is terminated with a Futaba-compatible standard “JR”-style connector. Servo horns and associated hardware are included.

It is important to note that stalling or back-driving this servo can strip its gears.



Specifications:

  • Torque:
    16.66 oz/in at 4.8V (1.2 kg/cm)
    22.21 oz/in at 6V (1.6 kg/cm)
     
  • Speed:
    .09 sec at 4.8V
    .07 sec at 6V
     
  • Voltage: 4.8v to 6v
  • Weight: .24oz (6.75 g)
  • Size: .68 x .87 x 1.06in (22 x 8.7 x 27mm
     
  • Digital
  • Lead Length: 160 mm
  • Storage Temperature: -20℃~60℃
  • Operating Temperature: -10℃~50℃
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes

HD-1440A

$5.99

Power HD 1711MG Mini Servo - 3.5Kg/cm(48.61 oz/in), 0.11 sec - 17.5g

Power HD HD-1711MG Mini Servo - 3.5Kg/cm(48.61 oz/in), 0.11 sec - 17.5g

The Power-HD DSM44 digital servo is a micro servo with digital control electronics for increased performance. Just like the Power-HD DSP33 ,the DSM44 is also very light and ranks as the secont lightest servo at RedwingRC- weighing only slightly over 6g!!! In the DSM44, the output shaft is supported by a ball bearing for decreased friction, and another great feature is that most of the gears are metal for increased durability! The lead is terminated with a Futaba-compatible standard “JR”-style connector. Servo horns and associated hardware are included.

It is important to note that stalling or back-driving this servo can strip its gears.



Specifications:

  • Torque:
    16.66 oz/in at 4.8V (1.2 kg/cm)
    22.21 oz/in at 6V (1.6 kg/cm)
     
  • Speed:
    .09 sec at 4.8V
    .07 sec at 6V
     
  • Voltage: 4.8v to 6v
  • Weight: .24oz (6.75 g)
  • Size: .68 x .87 x 1.06in (22 x 8.7 x 27mm
     
  • Digital
  • Lead Length: 160 mm
  • Storage Temperature: -20℃~60℃
  • Operating Temperature: -10℃~50℃
  • Hardware included
  • Suitable for F3P/EPP/KT Airplanes

HD-1711MG

$9.99

Power HD B5 Brushless Servo - 20.0 kg/cm (277.75 oz/in), 0.066 sec - High Voltage

Power HD B5 Brushless Servo - 20.0 kg/cm (277.75 oz/in), 0.066 sec - High Voltage

Description:

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B5-HV

$66.99

Power HD B7 Revolution (Low Profile) Brushless HV Servo - 13.0 kg/cm (180.54 oz/in), 0.055 sec

Power HD B7 Revolution (Low Profile) Brushless HV Servo - 13.0 kg/cm (180.54 oz/in), 0.055 sec

Description:

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B7-HV

$72.99

Heavy Duty 25T 1" Aluminum Servo Arm (Futaba, Savox, Power HD)

Heavy Duty 25T Metal Aluminum Servo Arm (Futaba, Savox, Power HD)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

 

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

hd-arm-d

$4.99

299 Low Profile Servo Winch w/ Built in Controller

299 Low Profile Servo Winch w/ Built in Controller

SEHREEFS59

$118.99

FUTABA S-H700 S.Bus High Performance Brushless Helicopter Servo .07sec/511.1oz @ 7.4V

FREE SHIPPING

FREE SHIPPING

FUTABA S-H700 S.Bus High Performance Brushless Helicopter Servo .07sec/511.1oz @ 7.4V

FUTABA S-H700 S.Bus High Performance Brushless Helicopter Servo .07sec/511.1oz @ 7.4V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)








  •  
  •  
  •  
  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01102312-3

$259.99

Out of stock
FUTABA BLS373SV S.Bus Brushless High Voltage, Hi-Torque Servo .11sec/513.9oz @ 7.4V

FREE SHIPPING

FREE SHIPPING

FUTABA BLS373SV S.Bus Brushless High Voltage, Hi-Torque Servo .11sec/513.9oz @ 7.4V

FUTABA BLS373SV S.Bus Brushless High Voltage, Hi-Torque Servo .11sec/513.9oz @ 7.4V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)









  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01102154-1

$275.99

Out of stock
FUTABA HPS-A700 S.Bus Brushless Ultra Torque Airplane Servo .12sec/1027oz @ 7.4V

FREE SHIPPING

FREE SHIPPING

FUTABA HPS-A700 S.Bus Brushless Ultra Torque Airplane Servo .12sec/1027oz @ 7.4V

FUTABA HPS-A700 S.Bus Brushless Ultra Torque Airplane Servo .12sec/1027oz @ 7.4V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)










  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01102295-3

$249.99