HiTec HS-7950TH Mega Torque High Voltage Coreless Titanium Gear Servo

Details


Availability	10 in stock
Weight	0.38 lbs
SKU	HS-7950TH
Manufacturer	Hitec
Our Price:	$112.99

Description

This is the Hitec HS-7950TH Mega Torque High Voltage Digital Servo, and is intended for use with any high performance giant scale aircraft, truggies and buggies, fast power boats, the largest aircraft, monster trucks or anywhere else you can use 480+ inch ounces of torque in.

One of Hitec's strongest servo, the "Ultra Torque" HS-7950TH is designed to operate on a two cell LiPo Pack. Featuring high resolution "G2" second generation programmable digital circuit and indestructible Titanium gears, the HS-7950TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7950TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing. The HS-7950TH has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 486 oz./in. of torque at 7.4 volts, while still maintaining a respectable 0.13 second transit time.

Features:

G2.5 12 bit Digital Programmable Circuit
Titanium Gear Train (MK first gear)
Ultra Performance Coreless Motor
Integrated Heatsink Case
(8) O-Rings for Water/Dust/Fuel protection
Dual Ball Bearing Supported Output Shaft

Programmable Features Include:

Dead Band Width
Direction of Rotation
Speed of Rotation (slower)
End Points
Neutral Points
Fail Safe On/Off
Fail Safe Point
Overload Protection* (default is off)

Note: These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.

Specifications:

Output Shaft Style	C24T Spline
Voltage Range	6.0V - 7.4V
No-Load Speed (7.4V)	0.13 sec/60°
No-Load Speed (4.8V)	0.18 sec/60°
No-Load Speed (6.0V)	0.15 sec/60°
Stall Torque (4.8V)	344oz-in. (22kg.cm)
Stall Torque (6.0V)	402oz-in. (29kg.cm)
Stall Torque (7.4V)	486oz-in. (35kg.cm)
Max PWM Signal Range	750-2250μsec
Travel per µs (Stock)	.080°/μsec
Travel per µs (Reprogrammed)	.132°/μsec
Max Rotation (Stock)	120°
Max Rotation (Reprogrammed)	198°
Pulse Amplitude	3-5V
Operating Temperature	-20°C to +60°C
Current Drain - idle (4.8V)	9mA
Current Drain - idle (6.0V)	9mA
Current Drain - no-load (4.8V)	220mA
Current Drain - no-load (6V)	300mA
Current Drain - stall (4.8V)	3.8A
Current Drain - stall (6V)	4.8A
Continuous Rotation Modifiable	Yes
Direction w/ Increasing PWM Signal	Clockwise
Deadband Width	1µs
Motor Type	Coreless Carbon Brush
Feedback Style	5KΩ Potentiometer
Output Shaft Support	Dual Ball Bearing MR106
Gear Material	Titanium Gears
Wire Length	11.81" (300mm)
Weight	2.40oz (68g)
Wire Gauge	22AWG
Servo Size	Standard