Dynam AT-6 Texan V3 Military Trainer 4S 1400mm Wingspan w/ 3-Stage Flaps

Details


Availability	2 in stock
Weight	5.00 lbs
SKU	DY8944v3
Our Price:	$239.00

Description

The upgraded Dynam AT-6 V3 offers enhanced performance. Key improvements include rear-mounted servos, a detachable wing design, and a more powerful BM3720-KV900 motor. Skylord-50A 5A BEC ESC. The RC AT6 is equipped with a 3 flaps, a redesigned fuselage that provides an expanded compartment, and supports a 4S battery for increased power. Additionally, the AT-6 comes with metal retractable landing gear, metal 7x servos and ball-link push rods.

Dynam AT-6 Texan V3 4S 1.4m w/ 3-stage Flaps upgraded details:

Rear-Mounted Servos (Upgraded to Metal Servos)
Optimizes the AT-6 V3's center of gravity, enhancing stability during flight.
Shortens the pushrod length, reducing response lag and improving control precision.
Detachable Wings
Simplifies transportation and storage, making it more convenient to carry.
Enables easier maintenance and quicker wing replacement.
No-Glue Vertical and Horizontal Stabilizers (Screw-On Installation)
Streamlines assembly and disassembly, enhancing convenience and durability.
Powerful BM3720-KV900 Motor
Provides a thrust of up to 2.8kg, delivering exceptional power for vertical climbs and high-G maneuvers.
Offers robust power reserves to handle more complex flying conditions and advanced aerobatics.
Upgraded ESC (Skylord-50A 5A BEC)
Ensures efficient and stable current management, allowing the motor and servos to operate smoothly.
Features a built-in 5A BEC, providing consistent power to the electronics and reducing the risk of failure.
Three-Stage Flap Design
Enhances control during takeoff and landing, especially improving stability at low speeds.
Adapts well to various flight scenarios, such as gliding or high-speed flying.
4S 14.8V 2200mAh 25C Battery
Delivers higher power output, extending flight time and improving overall performance.
Compatible with the high-power system, ensuring sustained high-performance operation.
Spacious Battery Compartment with Wooden Padding
Reinforced with wooden layers to enhance durability and prevent deformation over extended use.
Ball-Link Pushrods
Reduces play in the pushrod system, providing precise and reliable control of control surfaces.
Offers enhanced durability, minimizing wear over time.
Metal Retracts
Increases the strength and durability of the landing gear, ensuring reliable operation under demanding landing conditions.
Performs exceptionally well on hard surfaces and rough terrain.

These upgrades significantly enhance the Dynam AT-6 Texan V3 airplane's flight performance, reliability, and user experience, making it an excellent choice for advanced hobbyists seeking top-tier flight capabilities.

The Dynam AT-6 TexanV3 RC Plane is a high-performance, scale replica of the legendary US Army Air Corps training aircraft used during World War II. With a wingspan of 1400mm and a length of 895mm, this classic model is made from lightweight and durable EPO foam, ensuring it is strong and aerodynamic. The AT-6 Texan is powered by a powerful Detrum BM3720-KV900 brushless motor and an 14.8V 2200mAh Li-Po battery, allowing it to reach impressive speeds and perform stunning aerial maneuvers. The model comes with a Detrum 8-channel radio system, including a 6-axis gyro integrated into the MSR66A receiver for added stability and control, making it suitable for experienced pilots. Overall, the Dynam AT-6 Texan RC Plane is a great choice for any RC enthusiast looking for a high-quality, high-performance aircraft that is both easy to fly and fun to operate.

Dynam RC AT-6 Texan is a superb-scale WWII airplane. Most work had finished in the factory-assembly and painting. Everything has been done for you before you even open the box. All left is a few hours of final assembly and radio installation. When you're done, you'll have a fantastic flying scale warbird.

The AT-6 Texan comes out of the box with all kinds of details that have been finished for you, including factory-painted air scoops, a dummy radial engine, painted fuselage; also, it comes with the electric retract landing gear, which lets your fly more scale. The Detrum 3720-KV900 brushless motor with 2200mah 25c battery lets the airplane fly fast and can also do slow flying.

The scale split flaps are operational and ready to use right out of the box. You only need to use two servos. Retracts have been specially installed for the AT-6; its torque is 3.5kg.cm

Features

Durable and lightweight EPO construction.
Realistic scale features including attractive, classic AT-6 paint scheme and molded panel lines.
LED navigation lighting with LED control board
Servoless electronic metal retractable landing gear.
A redesigned fuselage that provides more internal space.
Detachable wing design.
Powerful BM3720-KV900 Brushless Outrunner motor.
Two TomCat Skylord-50A 5A-BEC ESC.
GAVIN 8CH 2.4Ghz radio system.
Detrum MSR66A 6CH 2.4Ghz Mini Receiver iStone 6-Axis Gyro Stabilizer w/ ABS System.
4S 14.8V 2200mAh 25C Li-Po battery w/ XT60 Connector.
Rear-mounted servos.
Aileron and elevator controls.
3 Flaps.
Ball-link push rods.
Comes with a decal set.
Suitable for intermediate or experienced pilots.

Specifications

Wingspan: 1370mm (53in)
Overall Length: 895mm (35.23in)
Flying Weight: 1250g (44.09oz)
Wing Loading: 44.6g/dm²
CG (Center of Gravity): 70-75mm from the leading edge of the wing at the root
Power System: Detrum BM3720-KV900 Brushless Outrunner motor - (pre-installed)
Electronic Speed Control: TomCat Skylord-50A 5A-BEC ESC - (pre-installed)
Propeller: 2-blade propeller 12*6
Servo: 7x 9g metal micro servos - (pre-installed)
Landing Gear: Metal E-Retract (Retractable) - (pre-installed)
Required Transmitter: GAVIN-8C 2.4Ghz 6-Channel or above
Required Receiver: MSR66A 6CH 2.4Ghz (iStone 6-Axis Gyro Stabilizer w/ ABS System)
Required Battery: 4S 14.8V 2200mAh 25C Li-Po w/ XT60 Connector
Aileron: Yes
Elevator: Yes
Rudder: Yes
3 Flaps: Yes
Approx. Flying Time: 8 minutes
Material: EPO Foam
Skill Level: Intermediate
Assembly Time: Quick Release
Age Level: 14+
Recommended Environment: Outdoor
Aircraft Type: Warbird

What's the difference between RTF, BNF, and PNP?

PNP (Plug-N-Play) RC airplanes have everything you need EXCEPT a transmitter, receiver, and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, and servos.

BNF (Bind-N-Fly) RC airplanes come with everything you need to get in the air EXCEPT the Transmitter and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, and an iStone gyro receiver. They are easy to use, versatile, and safe, making them the perfect choice for beginners and experienced pilots. The BNF (Bind and Fly) version, receivers such as the MSR66A work exclusively with Detrum transmitters.

Dynam SRTF version is based on the standard RTF (Ready to Fly), which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.

iStone Gyro Receiver (The receiver integrated with iStone stabilizer):

Six-axis gyro high-precision stabilization function, auto-recovery, one-click rescue. Incredibly accurate and greatly improves the flying experience.
Regarding different aircraft, the parameter and sensitivity of the gyro receiver can be programmed with a Detrum transmitter (Gavin6C/Gavin8C/Blitz DT9) directly.
Quick and easy setup process. If you don't want Gyro to join the flight, just choose Gyro off mode on Transmitter.

$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.