The New BLS-M72B V2 (SR/SXR Compatible), High Voltage, Mega Torque, Helical Gears, Brushless Motor, Digital with Magnetic Sensor
Blue Bird's most Powerful Servo with Magnetic Sensor / Helical Gear with dual mode SR/SXR functions!
Smoother, Precision, More Reliable & More Efficient
Helical Gears for supreme strength and precision.
APPLICATION / SUITABLE
Ideal for Extreme Large Scale 3D Airplane, Turbo Jet & 1/5 Buggy / Monster / Crawler / Off-road Car |
ELECTRICAL SPECIFICATION (FUNCTION OF THE PERFORMANCE)
Torque At 6.0V | 56.2 kg-cm / 780.6 oz-in |
Torque At 7.4V | 66.7 kg-cm / 926.5 oz-in |
Torque At 8.4V | 73.2 kg-cm / 1016.7 oz-in |
Speed At 6.0V | 0.12 sec / 60° |
Speed At 7.4V | 0.10 sec / 60° |
Speed At 8.4V | 0.08 sec / 60° |
PROTECTION MECHANISM
Soft Start Protection | Soft start to a neutral position. |
Over Voltage Protection | Over 9.0V drive the protection mode and 8.4V return to normal mode. |
Low Voltage Protection | Lower than 4.0V, drive the protection mode and 4.5V return to normal mode. |
Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
Lose Control Protection | When losing the transmitter signal, that servo will be back to the neutral position immediately and lock. |
POWER SUPPLY
Operating Voltage Range | 4.5V ~ 8.7V ( 2S HV Li-Poly / 2S Li-Fe) |
CONTROL SPECIFICATION
Control System | Higher-order Algorithm 32-bit MCU (Microcontroller Unit) Frequency:Up to 400Hz & 1500us or 1520us |
Frame Rate (Signal repeat rate) | Under 1ms【Compatible with Futaba_SR & Sanwa_SXR Dual-Mode】 |
Dead Band Width | 0.001ms ( Default:1us) |
Potentiometer (Variable Resistor) | Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR. |
MECHANICAL SPECIFICATIONS
Ball Bearing | Dual, Stronger Ball Bearings |
Gear | All Stainless Steel Helical Gears |
Outside Case | Full One-Piece Aluminum CNC Casing |
Motor | Custom High-Efficiency Brushless Motor |
Horn / Gear Spline | 25 Teeth |
PHYSICAL SPECIFICATIONS
Dimension (mm) | 40.5 x 21 x 42.9 mm / 1.59 x 0.83 x 1.69 in |
Weight (gram) | 92.0 ± 1 grams / 3.24 oz |
Product Picture / Dimension Sketch | |
Includes Servo and Servo Arm