Description
BMS-M52C V2 MAG SENSOR HELICAL GEAR, HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (61.5kg/854.2oz, 0.09sec at 8.4V) SR/SXR COMPATIBLE
Magnetic Hall-effect Sensor with High-Efficiency Powerful Coreless Motor. SR/SXR Dual Mode compatible.
Helical Gears for supreme strength and smoother precision.
- Soft Start Protection
- Magnetic Hall-effect Sensor W/ High-Efficiency Coreless Motor.
- SR/SXR Dual-Mode functions
- Over Voltage Protection
- Low Voltage Protection
- Locked Rotor Protection
- Temperature Protection
- Loss of Control Protection
APPLICATION / SUITABLE
Awesome smoothness, Ideal for 3D Airplane, Turbojet & 1/5, 1/6 and 1/8th Monster / Crawler / Truck and Off-road Car and Helicopter |
ELECTRICAL SPECIFICATION (FUNCTION OF THE PERFORMANCE)
Torque At 6.0V | 44.5 kg-cm / 618.1 oz-in |
Torque At 7.4V | 54.2 kg-cm / 752.8 oz-in |
Torque At 8.4V | 61.5 kg-cm / 854.2 oz-in |
Speed At 6.0V | 0.13 sec / 60° |
Speed At 7.4V | 0.11 sec / 60° |
Speed At 8.4V | 0.09 sec / 60° |
PROTECTION MECHANISM
Soft Start Protection | Soft start back to neutral position. | Over Voltage Protection | Over 9.0V drive the protection mode, and 8.4V return to normal mode. | Low Voltage Protection | Lower than 4.0V drive the protection mode, and 4.5V return to normal mode. | Locked Rotor Protection | Stall in 5 sec, output torque goes down. | Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. | Lose Control Protection | When losing the transmitter signal, that servo will immediately be back to the neutral position and locked. | |
POWER SUPPLY
Operating Voltage Range | 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe) |
CONTROL SPECIFICATION
Control System | Higher-order Algorithm of【STMicroelectronics】32-bit MCU ( Microcontroller Unit ) Frequency:Up to 400Hz & 1500us or 1520us | Frame Rate (Signal repeat rate) | Under 1ms【Compatible with Futaba_SR & Sanwa_SXR Dual-Mode】 | Dead Band Width | 0.001ms ( Default:1us) | Potentiometer (Variable Resistor) | Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR. | |
MECHANICAL SPECIFICATIONS
Ball Bearing | Soft start back to neutral position. | Gear | All Stainless Steel Helical Gears | Outside Case | Full One-Piece Aluminum CNC Casing | Motor | Custom High-Efficiency Coreless Motor | Horn / Gear Spline | 25 Teeth ( Same as F-Type ) | |
PHYSICAL SPECIFICATIONS
Dimension (mm) | 40.5 x 21 x 38.5 mm / 1.59 x 0.83 x 1.52 in |
Weight (gram) | 83.0 ± 1 grams / 2.93 oz |
Product Picture / Dimension Sketch | |
Includes Servo and Servo Arm