BLS-M35B, SR/SXR Edition, HV-DIGITAL, HIGH TORQUE, MEGA HIGH SPEED, BRUSHLESS +Servo Arm (38.1kg / 529.2oz [email protected])
The SR/SXR dual-mode competition-level servo, overcomes the issues of incompatibility between the two branded models. Designed with the convenience of "Automatic Matching" that allows you to plug and use immediately without the need to be tied to the same brand.
Awesome for 1/8th Buggy / On-Road Car & 3D Airplane, Helicopter Cyclic. |
Torque At 6.0V | 27.1 kg-cm / 376.4 oz-in |
Torque At 7.4V | 33.5 kg-cm / 465.3 oz-in |
Torque At 8.4V | 38.1 kg-cm / 529.2 oz-in |
Speed At 6.0V | 0.06 sec / 60° |
Speed At 7.4V | 0.05 sec / 60° |
Speed At 8.4V | 0.04 sec / 60° |
Soft Start Protection | Soft start back to neutral position. |
Over Voltage Protection | Over 9.0V drive the protection mode, and 8.4V return to normal mode. |
Low Voltage Protection | Lower than 4.0V, drive the protection mode, and 4.5V return to normal mode. |
Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
Lose Control Protection | When losing the transmitter signal, that servo will be back to the neutral position immediately and lock. |
Operating Voltage Range | 4.5V ~ 8.7V DC ( 2S HV Li-Poly / 2S Li-Fe Compatible ) |
Control System | Higher-order Algorithm of【STMicroelectronics】32-bit MCU ( Microcontroller Unit ) Frequency:Up to 400Hz & 1500us or 1520us |
Frame Rate (Signal repeat rate) | Under 1ms【Auto-adaptive with Futaba_UR/SR & Sanwa_SXR & KO_HCS Mode】 |
Dead Bend Width | 0.001ms ( Default:1us ) |
Potentiometer (Variable Resistor) | Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR. |
Ball Bearing | Dual, Stronger Ball Bearings.【EZO from Japan】 |
Gear | Stainless Steel Output gear with All steel gears |
Outside Case | Full One-Piece Aluminum CNC Casing |
Motor | Custom High-Efficiency Brushless Motor |
Horn / Gear Spline | 25 Teeth |
Dimension (mm) | 40.5 x 20 x 39 mm / 1.59 x 0.79 x 1.54 in |
Weight (gram) | 81.5 ± 1 grams / 2.87 oz |
Product Picture / Dimension Sketch | |
Includes Servo and Aluminum Servo Arm