B-26 Marauder 1500mm (59") Wingspan

Contact UsCustomer Reviews

B-26 Marauder 1500mm (59") Wingspan

Our Price:

$349.99

Quantity (3)

Availability 3 in stock
Weight 5.00 lbs
SKU DY8972SV
Manufacturer Dynam

Description:

RedwingRC Plug-and-Play aircraft!

Check out this really interesting design in the Warbird series- The Martin B-26 Marauder was one of the most successful Allied bombers of World War II. After a challenging introduction, the B-26 eventually became beloved for its exceptional durability and excellent medium bomber capabilities. Nicknamed the “Flying Torpedo”, the B-26 Marauder ended the war with the lowest combat loss rate of any American aircraft, bringing thousands of aviators safely home.

Dynam’s 1500mm wingspan B-26 Marauder brings the familiar scale outline of this iconic aircraft to the skies again! The aircraft is Dynam’s most ambitious warbird to date, introducing redesigned tricycle retracts for improved reliability and all new counter rotating propellers for scale appearance. To maximize convenient assembly and transport, the B-26’s outer wings can be detached from the engine nacelles, or the entire wing can be removed as one single piece. Major assembly of the aircraft is completed with only ten screws! For a large aircraft its size, the Dynam B-26 can be made very portable to fit in a small car’s trunk in under three minutes.

Dynam aircraft make excellent cost effective platforms for personalization and detailing, and this B-26 continues that tradition. The upper turret can swivel freely, and the canopy and nose covers are easily removed for detailing inside by ambitious modelers. There is even space in the belly if pilots want to add their own bomb bay door. With Dynam and your imagination, you can operate a truly special model aircraft you can be proud of!

The aircraft is optimized for a 4s 4000 battery for extended flight time and a good balance of thrust, wing loading, and flight duration. A large battery hatch provides plenty of space for a receiver or optional gyro. Flaps shorten takeoffs and reduce landing speeds, and the tall rudder has excellent authority. Power is provided by two Detrum 3512-650kV brushless motors for satisfying sport scale performance. The two Skylord 40A ESCs are mounted behind each motor for ideal cooling and the counter-rotating 10.5x8 propellers enhance the scale fidelity of the aircraft. Providing capable handling on short grass runways, in addition to the redesigned retracts the Dynam B-26 Marauder also features steel wire struts and soft scale sized foam rubber tires.

This model comes with 4-Panel Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

 

Key Features:

  • 9 Servos (7* 9g and 2* 17g)
  • 4 Panel Flaps factory installed 
  • Factory installed retracts with spring loaded retract door
  • Dual powerful dectrum motors installed
  • Spring loaded retract doors

 

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 44.3in (1126mm)
Flying Weight: 2350g
Motor Size: 2 x BM 3512-650kv
Propeller: 2 x (10 .5 x 8  4-blade) Counter-rotating
Radio / Transmitter: NOT INCLUDED (requires 6ch radio for flaps and retracts- not included)
Receiver: 6 Channel minumum (NOT INCLUDED)
Servos: 9 servos installed ( 7 x 9g and 2 x 17g)
Speed Control : 2 x Skylord 40A ESCs with 3A BEC Installed
Battery: 14.8V 4000 mah  (not included)
Charger: NOT INCLUDED--see our charger section
Flight Times:

Average 5-7 Minutes

Assembly Time:

1-2 hrs

 

 

$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.

: *
: *
: *
 

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$41.95

XQ 4013 digital 6v

Description:
The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.

The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.

The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.

Specifications:

  • Torque:
    • 166.7 oz/in at 4.8V (12.0 kg/cm)
    • 197.2 oz/in at 6V (12.8 kg/cm)
       
  • Speed:
    • .13 sec at 4.8V
    • .11 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2 oz (59g)
  • Size: 40x20x39mm
     
  • Gear Style: Futaba Arms
  • Modulation: Coreless Digital
  • Gear Type: Titanium
  • Weight: 2oz (59g)
  • Size: 40x20x39mm




Watch this video of the XQ 4013 beating the Hitec 7985mg

Features:

  • Titanium Gears
  • Waterproof
  • Coreless
  • Digital
  • High Torque/High Speed
  • Smooth resolution


Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!

 

X-4013

$42.50

DLE 35RA Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.


Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon


Specifications:

  • Displacement: 34.9 cc (2.13 cu in)
  • Bore: 1.5 in (38.5 mm)
  • Stroke: 1.17 in (35RA mm)
  • Weight: 2.6 lb (42oz)
  • RPM Range: 1,600-8,500
  • Output: 4.1 hp @ 8,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
  • Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
  • Suggested Break-in Prop: 18x6
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
  • Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller

 

 

RedwingRC Pre-Run
DLE 35ra DLE55
 

 

 

DLE-35 RA

$379.00