Sopwith Pup Biplane Micro 378mm Laser-Cut Wood Model Kit (Kit/PNP or BNF Electric Power version)

Contact UsCustomer Reviews

Sopwith Pup Biplane Micro 378mm Laser-Cut Wood Model Kit (Kit/PNP or BNF Electric Power version)

Market Price: $74.90
Our Price:

$49.99

You Save

33%

 

FREE SHIPPING

Kit Versions
Quantity (10)

Availability 10 in stock
Weight 1.30 lbs
SKU DW-K0601

Sopwith Pup Biplane Micro 378mm Laser-Cut Wood Model Kit (Kit/PNP or BNF Electric Power version)  

The Sopwith Pup was a British single-seater biplane fighter aircraft built by the Sopwith Aviation Company. It entered service with the Royal Flying Corps and the Royal Naval Air Service in the autumn of 1916. With pleasant flying characteristics and good manoeuvrability, the aircraft proved very successful. The Pup was eventually outclassed by newer German fighters, but it was not completely replaced on the Western Front until the end of 1917. Remaining Pups were relegated to Home Defence and training units. The Pup's docile flying characteristics also made it ideal for use in aircraft carrier deck landing and takeoff experiments..

Our model captures the very essence of this early fighter aircraft. This Micro Balsa plane is built from balsa and hardwoods with all the parts beautifully laser cut that are extremely accurate allowing you to build the perfect model. This kit is easy to operate and suitable for beginners and the PNP comes with everything you need except your battery and RX/TX. BNF includes 2 batteries and charger plus DSMX Receiver!

Features:

  • Accurate laser cutting parts for easy construction
  • Premium balsa and plywood materials
  • High performace power system
  • Equipped with comprehensive hardware pack
  • Micro balsa wood plane perfect for indoor and park flyer
  • Suitable for beginners and seasoned pilots
  • Enjoyable to build and fun to fly!

Specifications:

  • Wingspan: 378mm
  • Length: 280mm
  • Flying Weight: ≈42-50g
  • Radio: more than 3CH

Optional Power System:

  • Motor: 1104 3700KV (included in PNP)
  • ESC: 5A /1S (included in PNP)
  • Servo: 1.7g * 2pcs (included in PNP)
  • Propeller: 4530-5030 (included in PNP)
  • Battery: 1S 150-250mAh and charger (included in PNP+)
  • Receiver: MINI RX144 (DSMX/2) (included in BNF version)
  • Transmitter: 3Ch or greater (Not included)
Kit Versions:
K0601= KIT only
K0602= KIT+Motor(1104 3700KV+1.5mm Prop Saver+5030 Prop+2.0 Pin 3P)
K0604 (PNP)= KIT+Motor+ESC( 1S7A+2.0Pin 3P+Walkera Female 2P+1.25P 2pin)+Servo(1.7g*2)
K0605 (PNP+)= K0604+2pcs*1S 100mAh Battery+USB Charger
K0605-144 (BNF)= K0605+Mini Receiver RX144 (DSMX/2)
 
Free shipping lower 48 USA only. Contact us at [email protected] for international shipping

: *
: *
: *
 

FUTABA R7003SB FASST 2.4GHz 3-Channel BiDirectional High Voltage Receiver For aircraft models

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)


  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01102197-1

$109.99

50cc EXTRA 330SC - Red

Description:

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

 

Product Manual
 

 

 

 

 




Specifications:*(More Coming Soon)*

  • Wing span: 2260mm / 88.97"
  • Wing area: 1480 sq. inches
  • All up flying weight: 16.4 lbs
  • Length: 2065mm / 84.3"
  • Cowl
    • Inside diameter: 10.5" (266.7mm)
    • Inside height: 8.75" (222.25mm)













    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
  • Engine: DLE 55, DLE 55RA
  • Radio: 6 channel recommended (4ch possible)
  • Recommended Spinner Size:
  • Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
  • Recommended Prop Size:
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |

 

 

 


 

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Carbon fiber landing gear and accessories
  • Carbon fiber Rei enforcements:
    • CF stringers in fuse
    • CF stringers in wings
    • CF wing reinforcement tubes
    • CF retention pins in stabs/wings
  • Fiberglass stab mounts
  • Painted matching spinner (Optional)
  • Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
  • NOW COME WITH SIDE FORCE GENERATORS!

 

 




tml', 'popup', 'width=500,height=500'); return false">DLE 35ra DLE55


Build & Ship Plane

50-EXTRA-R-SS

$689.00

Throttle Arm Extension (#3)

Universal Throttle Arm Extension (#3)

New Throttle Arm!

This extension provides extra room between throttle arm and choke arm.  Remove the existing throttle arms from the carb and slide this extension arm in place and tighten the set screws.

Specifications:

  • Height- 16mm
  • Includes two set screws
  • Efficient design

SS-TSA-3

$10.99